Vixen Horns VXH2311C Bedienungsanleitung

VXH2311C

INSTALLATION GUIDE

PAGE 1 of 2

BEFORE BEGINNING YOUR INSTALLATION

Read through the instruction guide before getting started with the installation. Professional installation is recommended for

this product.

CONTENTS

Dual Trumpet Horn (Chrome Color)

12V Heavy Duty Air Compressor

4-PIN 12V/30A Relay

3/8" OD Air Line

Mounting Hardware5

SAFETY INSTRUCTIONS

Make sure you never attempt to disassemble this horn kit’s electrical components.

Never use your bare hands to any part of the compressor immediately after or during use.

Avoid operating this product in an area with risk of falling or submergence into a liquid (water).

Do not reach out for or touch any component that has fallen or been submerged into water.

Make sure you set up in areas with good ventilation.

Never sound the air horn anywhere near your ear(s) or that of another person.

Make sure your battery ground is detached before getting your installation started.

Employ equipment for eye protection during drilling operations.

The specific voltage requirement for this horn kit is 12 volt DC, therefore installation must be done to a DC power

source of 12 volts.

HORN MOUNTING

Identify a suitable area for mounting, preferably an unobstructed sheet-metal surface like the frame or body of

the vehicle so as to provide a firm platform which will help protect the horn from damage due to excessive

shaking. Do not attach the horn to any plastic or other flexible material.

Using the bracket as a guide estimate and mark the positions for the holes and then perforate to size using a

drill.

Use the provided mounting hardware to fasten the horn.

VXH2311C

INSTALLATION GUIDE

PAGE 2 of 2

COMPRESSOR MOUNTING

The ideal location for the compressor to be installed is a dry area inside your engine compartment where it

will be safe from exhaust and engine manifold heat.

To make the compressor firm and secure, drill a hole of 3/16". IMPORTANT: The compressor must be

mounted vertically (with air exhaust port facing downward).

Install the bolt’s head into the compressor housing’s slot. Tighten the compressor firmly to the vehicle with the

provided lock washer and nut.

AIR LINE INSTALLATION

Connect one side of the airline to the compressor’s air exhaust port and the other side to the trumpet's barbed

fitting.

Do not make any sharp bends or kinks in the tubing which could alter the sound of the horn or even restrict

airflow.

IMPORTANT: Airlines are sometimes already pre-installed. In such situation, ensure that they are inserted

entirely into the fittings on the trumpet and compressor.

ELECTRICAL CONNECTIONS (FACTORY HORN SWITCH)

For vehicles with a two-terminal factory horn, transfer the wires to the compressor’s terminals. If the horn

doesn’t sound even if the compressor motor turns on, simply reverse the wires.

For vehicles with one-terminal factory horns, make sure you transfer the wire to the compressor’s positive (+)

terminal. The negative (-) terminal uses a 16-gauge wire or heavier to connect to ground.

ELECTRICAL CONNECTIONS (NEW HORN BUTTON)

In a dry location, install the relay provided making sure that terminals face downwards near the horn.

Using a 16-gauge wire or heavier, connect PIN 87 of the relay to the positive (+) terminal of the compressor.

Connect PIN 85 of the relay to the horn button (not provided). The other horn button terminal is attached to

any rust and paint free metal to ground. Connect using an 18-gauge wire or heavier.

Connect PIN 30 and 86 of the relay to the battery, alternator or other positive (+) of 12-volts. Make sure the

wire used is a 16-gauge wire or heavier. Use a 20A fuse (not provided) to protect the electrical circuit.

Inhaltsverzeichnis

Andere Vixen Horns Horn Handbücher

Vixen Horns

Vixen Horns VXO8325/3114 Bedienungsanleitung

Vixen Horns

Vixen Horns VXO8715/3118 Bedienungsanleitung

Vixen Horns

Vixen Horns VXO8330/3118B Bedienungsanleitung

Vixen Horns

Vixen Horns VXO4318B Bedienungsanleitung

Vixen Horns

Vixen Horns VXO8705/3114 Bedienungsanleitung

Vixen Horns

Vixen Horns VXO8330APRO/4124XC Bedienungsanleitung

Vixen Horns

Vixen Horns VXO4830AB/3418B Bedienungsanleitung

Vixen Horns

Vixen Horns VXM2390NL Bedienungsanleitung

Vixen Horns

Vixen Horns VXS6100 Bedienungsanleitung

Vixen Horns

Vixen Horns VXO8705/3311B Bedienungsanleitung

Vixen Horns

Vixen Horns VXO8330APRO/3318B Bedienungsanleitung

Vixen Horns

Vixen Horns VXO8115/3114 Bedienungsanleitung

Vixen Horns

Vixen Horns VXO8560/3318C Bedienungsanleitung

Vixen Horns

Vixen Horns VXO8210/1101 Bedienungsanleitung

Vixen Horns

Vixen Horns VXO8115/3118B Bedienungsanleitung

Vixen Horns

Vixen Horns VXH3118B Bedienungsanleitung

Vixen Horns

Vixen Horns VXO8210/3318 Bedienungsanleitung

Vixen Horns

Vixen Horns VXPRO8524B Bedienungsanleitung

Vixen Horns

Vixen Horns VXO8560 Bedienungsanleitung

Vixen Horns

Vixen Horns VXO4114 Bedienungsanleitung

Vixen Horns

Vixen Horns VXO4830AB/1164B Bedienungsanleitung

Vixen Horns

Vixen Horns VXO8815/3118B Bedienungsanleitung

Vixen Horns

Vixen Horns VXO8330APRO/3418C Bedienungsanleitung

Vixen Horns

Vixen Horns VXH3118 Bedienungsanleitung

Beliebte Horn Handbücher anderer Marken

Elk Products

Elk Products 45 Bedienungsanleitung

Valcom

Valcom V-1050C Bedienungsanleitung

Cooper Wheelock

Cooper Wheelock DB3 Series Bedienungsanleitung

Altec Lansing

Altec Lansing 811B HF HORN Bedienungsanleitung

RF Elements

RF Elements UltraHorn CC Series Bedienungsanleitung

Edwards Signaling

Edwards Signaling 869DSTR-G1 Series Montageanleitung

Valcom

Valcom V-1030C Bedienungsanleitung

Valcom

Valcom VIP-130AL-SA Bedienungsanleitung

Electro-Voice

Electro-Voice HPT94 Bedienungsanleitung

Toa

Toa LE-M124 Bedienungsanleitung

EAW

EAW MR-102B Bedienungsanleitung

AUSTRALIAN MONITOR

AUSTRALIAN MONITOR MH30 Bedienungsanleitung

Pequod

Pequod TWISTER 3.1 Bedienungsanleitung

United Pacific

United Pacific 46151 Bedienungsanleitung

Wolo

Wolo OCEAN ALERT 170 Bedienungsanleitung

Altec

Altec 151A PAGING HORN Bedienungsanleitung

aidapt

aidapt VM953 Programmierhandbuch

Valcom

Valcom V-1069 Bedienungsanleitung