English - ii
IMPORTANT SAFETY INSTRUCTIONS
Your display is designed and manufactured to operate within dened design limits.
Misuse may result in electric shock or re. To prevent your display from being
damaged, the following instructions should be observed for the installation, use,
and maintenance of your display. Read the following safety instructions before
operating your display. Keep these instructions in a safe place for future reference.
• To reduce the risk of electric shock or component damage, switch o the power
before connecting other components to your display.
• Read these instructions.
• Keep these instructions.
• Heed all warnings.
• Follow all instructions.
• Do not use this apparatus near water.
• Clean only with dry cloth.
• Do not block any ventilation openings. Install in accordance with the manufacturer’s
instructions.
• Do not install near any heat sources such as radiators, heat registers, stoves, or
other apparatus (including ampliers) that produce heat.
• Do not defeat the safety purpose of the polarized or grounding-type plug. A
polarized plug has two blades with one wider than the other. A grounding type plug
has two blades and a third grounding prong. The wide blade or the third prong are
provided for your safety. If the provided plug does not t into your outlet, consult an
electrician for replacement of the obsolete outlet.
• Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
• Only use attachments/accessories specied by the manufacturer.
• Use only with the cart, stand, tripod, bracket, or table specied by the
manufacturer, or sold with the apparatus. When a cart is used, use
caution when moving the cart/apparatus combination to avoid injury
from tip-over.
• Unplug this apparatus during lightning storms or when unused for long
periods of time.
• Refer all servicing to qualied service personnel. Servicing is required when the
apparatus has been damaged in any way, such as power-supply cord or plug is
damaged, liquid has been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not operate normally, or
has been dropped.
• Unplug the power cord before cleaning your display.
• When moving your display from an area of low temperature to an area of high
temperature, condensation may form in the housing. Wait before turning on your
display to avoid causing re, electric shock, or component damage.
• A distance of at least three feet should be maintained between your display and
any heat source, such as a radiator, heater, oven, amplier etc. Do not install your
display close to smoke. Operating your display close to smoke or moisture may
cause re or electric shock.
• Slots and openings in the back and bottom of the cabinet are provided for
ventilation. To ensure reliable operation of your display and to protect it from
overheating, be sure these openings are not blocked or covered. Do not place your
display in a bookcase or cabinet unless proper ventilation is provided.
• Never push any object into the slots and openings on your display cabinet. Do
not place any objects on the top of your display. Doing so could short circuit parts
causing a re or electric shock. Never spill liquids on your display.
• Your display should be operated only from the type of power source indicated on
the label. If you are not sure of the type of power supplied to your home, consult
your dealer or local power company.
• Do not apply pressure or throw objects at your display. This may compromise the
integrity of the display. The manufacturer’s warranty does not cover user abuse or
improper installations.
• The power cord must be replaced when using dierent voltage than the voltage
specied. For more information, contact your dealer.
• When connected to a power outlet, power is always owing into your display. To
totally disconnect power, unplug the power cord.
• Do not overload power strips and extension cords. Overloading can result in re
or electric shock.
• The wall socket should be installed near your display and easily accessible.
• Only power of the marked voltage can be used for your display. Any other voltage
than the specied voltage may cause re or electric shock.
• Do not touch the power cord during lightning. To avoid electric shock, avoid
handling the power cord during electrical storms.
• Unplug your display during a lightning storm or when it will not be used for long
period of time. This will protect your display from damage due to power surges.
• Do not attempt to repair or service your display yourself. Opening or removing the
back cover may expose you to high voltages, electric shock, and other hazards. If
repair is required, contact your dealer and refer all servicing to qualied service
personnel.
• WARNING: Keep your display away from moisture. Do not expose your display to
rain or moisture. If water penetrates into your display, unplug the power cord and
contact your dealer. Continuous use in this case may result in re or electric shock.
• Do not use your display if any abnormality occurs. If any smoke or odor becomes
apparent, unplug the power cord and contact your dealer immediately. Do not try
to repair your display yourself.
• Avoid using dropped or damaged appliances. If your display is dropped and the
housing is damaged, the internal components may function abnormally. Unplug the
power cord immediately and contact your dealer for repair. Continued use of your
display may cause re or electric shock.
Safety Information - M-Series Display
