Vjoycar Q903 Bedienungsanleitung

Q903 USER GUIDE

1. Q903 Features

b. Supports 180 hours continuous voice recording.

c. Auto voice activate function support starting recording when conversation starts and stops when the conversation ends.

d. Built-in 3000mAh rechargeable high temperature resistance lithium-polymer battery.

e. Power bank function, 5V 1A output can charge mobile phone, tablet PC, MP3, MP4 and so on..

f. With LED Torch function.

Hardware Specifications:

Size: 125mm x60mm x 14mm

Storage Temp: -40 to 85°C

Operating Temp: -10 to 55°C

Power: Rechargeable, 3000mAh, Lithium-polymer Battery

2. Product Image

(see picture)

3. Button Operation

a. Record On: Short press button 2 times, and then long press 1 time until the blue LED always glitter.

b. Record Off: Short press button 4 times, and then long press 1 time until the blue LED off.

C. Power bank on: long press the button 1 time.

d. Volume +: Long press the function button “+”

Volume -: Long press the function button “–”

e. Select recording file: enter into “playing”status after insert earphone, short press function button “+”1 time to select the

next file and short press function button “-”1 time to select the last file.

4. How to switch between recording and playing status?

a. Device on

b. Insert earphone for playing

c. Take out earphone for recording

5. Status Check

a. Device On: The record LED indicator always glitter.

b. Device Off: The record LED indicator off.

6. Power Check and Recharge

a. Power Status: Short press button 1 time, the power indicator will be on, and it will be off 10 seconds automatically.

Power indicator

1 LED on

2 LED on

3 LED on

4 LED on

Power

＜25%

＜50%

＜75%

100%

b. Device will be turned off when out of power, need to be turned on again after charging.

c. The charging LED indicator will glitter during charging and will be always on after full charged.

d. For the first time use, after device on, the power LED indicator glitter, means the power is very low, please recharge the

device before using.

7. Flashlight Function

On/Off : Short press button 1 time.

8. Recording Settings

All recoding settings including time, voice sensitivities, mute time, voice quality, record amplify and record time periods can

revised by editing a record setting file.

8.1 RECORD setting file

Connect device with PC via USB cable. There will be RECORD.txt in the folder.

8.2 Settings

a. Time Settings

Time format: Year-Month-Day Hour-Minute-Second

Change the time to the current time after the equal sign.

b. Voice Sensitivity Settings

The smaller number of the sensitivity rate the higher voice required.

Voice Sensitivity Range: 0-50

Default Rate: 10

c. Mute Time Settings

Device will stop recording after conversation ended for certain minutes.

Mute rate: 0-999 minutes

Default Rate: 3

d. Voice Quality Settings

Rate 1: 32Kbps, 8G memory can store 580 hours audio

Rate 2: 64Kbps, 8G memory can store 290 hours audio

Rate 3: 192kbps, 8G memory can store 96 hours audio

Default Rate: 2

e. Record Amplify Settings

For long distance recording, voice will be enhanced by amplifying record.

Rate 1: Within 1M range

Rate 2: Within 1-3M range

Rate 3: Within 3-5M range

Rate 4: Over 5M range

f. Record time periods settings

The time setting default one week for one cycle. From Sunday to Saturday, you can set the record time periods according to

your request.

The default time period as below:

Sun.=00:00-23:59

Mon.=00:00-23:59

Tues.=00:00-23:59

Wed.=00:00-23:59

Thur.=00:00-23:59

Fri.=00:00-23:59

Sat.=00:00-23:59

Note: the device is on during above time periods. Outside these time periods, the device is off.

If no need record for the whole day, please set it blank after the equal sign.

If need record for the whole day, set it as 00:00-23:59 after the equal sign.

One day can set two time periods maximum. For example: Sun.= 08:00-12:00, 14:00-18:00

8.3 Update Settings

Very important notice: Set Update Setting to Y, system will start update settings after U disk is exited.

System will not start update settings if it is set to N.

9. Power bank

9.1 Specification:

a. Build in 3000mAh Lithium polymer battery.

b. Micro USB input, USB-A output, can charge mobile phone, tablet PC, PDA, MP3, MP4 and so on.

c. With low voltage and over voltage protection.

d. The DC to DC output efficiency up to 80-95%

e. The power LED indictor shows the remaining power as below table.

Power indicator

1 LED on

2 LED on

3 LED on

4 LED on

Power

＜25%

＜50%

＜75%

100%

9.2 Operation guide:

a. Input: Charge Q903 inside battery by Micro USB (DC 5V), the charging LED glitter during charging.

b. Output: Connect Q903 with other devices like mobile phone by the USB cable, long press the ON/OFF button to turn on

the power bank function, the power LED indicator will show the remaining power.

c. The USB input and USB output can be work at the same time.

d. In order to save power, the power LED indicator will be off after 10 seconds. Short press the button 1 time, the LED will be

on again.

f. If no any operation (no input , no output) for 20 seconds, the power bank function will be off automatically for saving

power.

g. For the first time use, if the power LED glitter, means power is very low, please recharge it before using.

9.3 Attentions:

a. When this product is standby, the power of the built-in battery will automatically release, the normal storage time is around

3 months when this product is fully charged.

b. This product has over charging and over discharging protection, the USB output will be cut off automatically if the battery

voltage is too low.

c. It is normal that there is heat release when this product is charging in or out, which will turn back to the normal

temperature after the charging completed.

9.4 Cautions:

a. Do not use the battery in bathrooms etc. with high humidity or where it may be exposed to water.

b. Do not use or store at places with high temperatures, high humidity or much dust.

c. Do not modify or disassemble the battery.

d. Young children should be supervised to ensure that they do not play with the appliance.

e. Do not throw the battery into a fire.

f. Do not subject the battery to strong impacts and do not throw it.

10. Hardware Specification

Input DC: USB 5.0V 1000mA

Battery Complicity: 3.7V/3000mAh

Charging Time: 4～6 hours

Recording Power: Continuous 180 recording for 1 charge

Recording file format: WAV format

Memory : nand flash 8GB

Recording Sampling Rate:48KHz/16bit

Voice Quality: 192Kbps/64Kbps/32Kbps

Support Recording Time32Kbps/8G/580 hours；64Kbps/8G/290 hours；192Kbps/8G/96 hours

Recoding Distance: Built-in Automatic Gain Control，support up to 10M recording distance.

Frequency: 20Hz-20KHz

Connector: Standard Mini USB Slot

Input Slot: Mini 5pin USB2.0 Full Speed

Flash Light: LED 0.1W

Support System: Windows XP/VISTA/WIN 7

Working Temp: 0℃～+55℃

Storage Temp: -20℃～+80℃

Inhaltsverzeichnis

Andere Vjoycar Diktiergerät Handbücher

Vjoycar

Vjoycar Q5 Bedienungsanleitung

Beliebte Diktiergerät Handbücher anderer Marken

Sony

Sony ICD-UX533F Bedienungsanleitung

RCA

RCA VR5230 Bedienungsanleitung

Ramsey Electronics

Ramsey Electronics BULLSHOOTER ENDLESS LOOP BS2C Benutzerhandbuch

Sony

Sony TCM-400DV Bedienungsanleitung

LogTag

LogTag TREL30-16 Bedienungsanleitung

SVAT

SVAT CVP800 Bedienungsanleitung

Marantz

Marantz PMD620 Bedienungsanleitung

Zoom

Zoom H4next Bedienungsanleitung

Roland

Roland BR-900CD Bedienungsanleitung

JVC

JVC ProHD GY-HMZ1U Bedienungs- und Wartungshandbuch

Panasonic

Panasonic PQT8531-P Bedienungsanleitung

Sanyo

Sanyo TRC-6400 Bedienungsanleitung

Tascam

Tascam DR-07 Bedienungsanleitung

Olympus

Olympus DW-90 Bedienungsanleitung

Sanyo

Sanyo ICR-B150 Bedienungsanleitung

Korg

Korg D4 Bedienungsanleitung

Sony

Sony ICD-SX46 - Ic Recorder Bedienungsanleitung

Olympus

Olympus DIGITAL VOICE RECORDER WS-200S Montageanleitung