1 How to Read this Design Guide
1.1.1 Copyright, Limitation of Liability and Revision Rights
This publication contains information proprietary to Danfoss. By accepting and using this manual the user agrees that the information contained herein
will be used solely for operating equipment from Danfoss or equipment from other vendors provided that such equipment is intended for communication
with Danfoss equipment over a serial communication link. This publication is protected under the Copyright laws of Denmark and most other countries.
Danfoss does not warrant that a software program produced according to the guidelines provided in this manual will function properly in every physical,
hardware or software environment.
Although Danfoss has tested and reviewed the documentation within this manual, Danfoss makes no warranty or representation, neither expressed nor
implied, with respect to this documentation, including its quality, performance, or fitness for a particular purpose.
In no event shall Danfoss be liable for direct, indirect, special, incidental, or consequential damages arising out of the use, or the inability to use information
contained in this manual, even if advised of the possibility of such damages. In particular, Danfoss is not responsible for any costs, including but not
limited to those incurred as a result of lost profits or revenue, loss or damage of equipment, loss of computer programs, loss of data, the costs to substitute
these, or any claims by third parties.
Danfoss reserves the right to revise this publication at any time and to make changes to its contents without prior notice or any obligation to notify former
or present users of such revisions or changes.
1.1.2 Available Literature for VLT
®
Automation VT Drive FC322
-VLT® Automation VT Drive FC322 Instruction Manual MG.20.Ux.yy provide the neccessary information for getting the drive up and running.
-VLT® Automation VT Drive FC322 High Power Instruction Manual MG.20.Vx.yy provide the neccessary information for getting the HP drive up
and running.
-VLT® Automation VT Drive FC322 Design Guide MG.20.Xx.yy entails all technical information about the drive and customer design and appli-
cations.
-VLT® Automation VT Drive FC322 Programming Guide MN.20.Wx.yy provides information on how to programme and includes complete pa-
rameter descriptions.
-VLT® Automation VT Drive FC322 Profibus MG.33.Cx.yy
-VLT® Automation VT Drive FC322 DeviceNet MG.33.Dx.yy
-Output Filters Design Guide MG.90.Nx.yy
-VLT® Automation VT Drive FC322 Cascade Controller MI.38.Cx.yy
-Application Note MN20A102: Submersible Pump Application
-Application Note MN20B102: Master/Follower Operation Application
-Application Note MN20F102: Drive Closed Loop and Sleep Mode
-Instruction MI.38.Bx.yy: Installation Instruction for Mounting Brackets Enclosure type A5, B1, B2, C1 and C2 IP21, IP55 or IP66
-Instruction MI.90.Lx.yy: Analog I/O Option MCB109
-Instruction MI.33.Hx.yy: Panel through mount kit
x = Revision number
yy = Language code
Danfoss technical literature is also available online at
www.danfoss.com/BusinessAreas/DrivesSolutions/Documentations/Technical+Documentation.htm
.
Automation VT Drive FC322 Design Guide 1 How to Read this Design Guide
MG.20.X1.22 - VLT®is a registered Danfoss trademark
5
1
