VMIC VMIVME-7455 Bedienungsanleitung
Artisan Technology Group is your source for quality
new and certied-used/pre-owned equipment
• FAST SHIPPING AND
DELIVERY
• TENS OF THOUSANDS OF
IN-STOCK ITEMS
• EQUIPMENT DEMOS
• HUNDREDS OF
MANUFACTURERS
SUPPORTED
• LEASING/MONTHLY
RENTALS
• ITAR CERTIFIED
SECURE ASSET SOLUTIONS
SERVICE CENTER REPAIRS
Experienced engineers and technicians on staff
at our full-service, in-house repair center
WE BUY USED EQUIPMENT
Sell your excess, underutilized, and idle used equipment
We also offer credit for buy-backs and trade-ins
www.artisantg.com/WeBuyEquipment
REMOTE INSPECTION
Remotely inspect equipment before purchasing with
our interactive website at www.instraview.com
LOOKING FOR MORE INFORMATION?
Visit us on the web at www.artisantg.com for more
information on price quotations, drivers, technical
specications, manuals, and documentation
Contact us: (888) 88-SOURCE | sales@artisantg.com | www.artisantg.com
SM
View
Instra
12090 South Memorial Parkway
Huntsville, Alabama 35803-3308, USA
(256) 880-0444 w(800) 322-3616 wFax: (256) 882-0859
VMIVME-7455
Single-Slot VMEbus CD-ROM Drive
Module
Installation Guide
522-007455-000 Rev. A
October 05, 1999
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
12090 South Memorial Parkway
Huntsville, Alabama 35803-3308, USA
(256) 880-0444 w(800) 322-3616 wFax: (256) 882-0859
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
© Copyright 1999. The information in this document has been carefully checked and is believed to be entirely reliable.
While all reasonable efforts to ensure accuracy have been taken in the preparation of this manual, VMIC assumes no
responsibility resulting from omissions or errors in this manual, or from the use of information contained herein.
VMIC reserves the right to make any changes, without notice, to this or any of VMIC’s products to improve reliability,
performance, function, or design.
VMIC does not assume any liability arising out of the application or use of any product or circuit described herein; nor
does VMIC convey any license under its patent rights or the rights of others.
For warranty and repair policies, refer to VMIC’s Standard Conditions of Sale.
AMXbus, BITMODULE, COSMODULE, DMAbus, Instant OPC wizard logo, IOWorks Access, IOWorks Foundation,
IOWorks man figure, IOWorks Manager, IOWorks Server, MAGICWARE, MEGAMODULE, PLC ACCELERATOR
(ACCELERATION), Quick Link, RTnet, Soft Logic Link, SRTbus, TESTCAL, “The Next Generation PLC”, The PLC
Connection, TURBOMODULE, UCLIO, UIOD, UPLC, Visual Soft Logic Control(ler),
VMEaccess
,
VMEmanager
,
VMEmonitor
, VMEnet, VMEnet II, and
VMEprobe
are trademarks. The I/O Experts, The I/O Systems Experts, The Soft
Logic Experts, and The Total Solutions Provider are service marks of VMIC.
COPYRIGHT AND TRADEMARKS
VMIC
All Rights Reserved
This document shall not be duplicated, nor its contents used for any
purpose, unless granted express written permission from VMIC.
The I/O man figure, IOWorks, UIOC, Visual IOWorks, and
WinUIOC
are registered trademarks of VMIC.
ActiveX is a trademark. Microsoft, Microsoft Access, MS-DOS, Visual Basic, Visual C++, Win32, Windows,
Windows NT, and XENIX are registered trademarks of Microsoft Corporation.
MMX is a trademark and Celeron is a registered trademark of Intel Corporation.
PICMG and CompactPCI are registered trademarks of PCI Industrial Computer Manufacturers’ Group.
Other registered trademarks are the property of their respective owners.
(I/O man figure) (IOWorks man figure)(Instant OPC wizard logo)
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
12090 South Memorial Parkway
Huntsville, Alabama 35803-3308, USA
(256) 880-0444 w(800) 322-3616 wFax: (256) 882-0859
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
5
Installation Procedures
Contents
Installation of theVMIVME-7455 with the VMIVME-7589, or the VMIVME-7589A . . . .. . . . . . . . . . .. 9
Installation of the VMIVME-7455with the VMIVME-7591, VMIVME-7592, or the VMIVME-7695. 11
Installation of theVMIVME-7455 with the VMIVME-7696 . . . . . . . . . . . .. . . . . . . . . . .. . . . . . . . . . . .. . . . . 12
Board P1 Connector Pinout .. . . . . . . . . . . . . .. . . . . . . . . . .. . . . . . . . . . .. . . . . . . . . . . .. . . . .. . . . . . . . . . . .. . . . . 14
Board P2 Connector Pinout .. . . . . . . . . . . . . .. . . . . . . . . . .. . . . . . . . . . .. . . . . . . . . . . .. . . . .. . . . . . . . . . . .. . . . . 15
Introduction
The VMIVME-7455 is designed to interface with VMIC’s PC/AT family of CPU
products. A 6U single-slot VMEbus passive board, that contains a 24x Multisession
photo CD-ROM drive, compatible with CD-I, Video CD, Enhanced CD, and CD
PLUS. CPU boards connect to the VMIVME-7455 by way of the P2 connector on the
VMEbus backplane. The VMIVME-7455 is also compatible with VMIC’s
VMIVME-7452 Single-Slot VMEbus Floppy/Hard Disk Module with Flash Memory.
A diagram of the VMIVME-7455 is shown in Figure 1 on page 6.
Three separate procedures are outlined in this installation guide:
1. Installation of the VMIVME-7455 with the VMIVME-7589, or -7589A CPU.
2. Installation of the VMIVME-7455 with the VMIVME-7591, -7592, or the -7695*.
3. Installation of the VMIVME-7455 with the VMIVME-7696 CPU.
*The VMIVME-7695 (VME64) is only compatible with the VMIVME-7455 if used in a
standard VMEbus chassis with the shrouded P2 96-pin backplane connectors.
The VMIVME-7455 is factory configured and supported only as a IDE Slave device.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
6
VMIVME-7455 Single-Slot VMEbus CD-ROM Drive Module
Figure 1 VMIVME-7455 and Cables
VMIVME-7455
64-Conductor
VMIC Cable Assembly
Model#VMIVME-VMXC-3
64-Conductor
VMIC Cable Assembly
Model#VMIVME-VMXC-7
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
7
Figure 2 VMIVME-7455 Board Layout
discisc
compact
VMIVME
7455
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
8
VMIVME-7455 Single-Slot VMEbus CD-ROM Drive Module
The VMIVME-7455 utilizes the P2 connectors on the VMEbus Backplane rear I/O for
the routing of all signals. All IDE signals are routed from the CPU to the
VMIVME-7455 by way of 64-conductor cable assemblies, using flat ribbon cables (see
figure below for a typical VMEbus backplane and shrouded connectors). See “Board
P2 Connector Pinout” on page 15 for the P2 connector.
VMIC recommends the use of backplanes with the shrouded type backplane
connectors. The shrouded connectors provide stability and the proper pin alignment.
Figure 3 VMEbus Chassis with Shrouded Connectors
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
9
Installation of the VMIVME-7455 with the VMIVME-7589, or the VMIVME-7589A
Installation of the VMIVME-7455 with the VMIVME-7589, or the
VMIVME-7589A
The VMIVME-7455 receives and passes IDE signals by way of the P2 connector,
routed through the backplane from the following CPUs: VMIVME-7589 and
VMIVME-7589A. To utilize the P2 configuration, a backplane which supports I/ O
cabling from the rear must be used, along with a 64-conductor cable assembly (VMIC
Model Number VMIVME-VMXC-3), see Figure 4 below. Figure 5 on page 10 is an
illustration of the installation. The cable is supplied with the VMIVME-7455. Figure 4
shows the cable used with the VMIVME-7589, or the VMIVME-7589A.
When installing the VMIVME-7589, or the -7589A with the VMIVME-7455, and the
optional VMIVME-7452, the boards must be installed in consecutive slots. Under
certain conditions the system may require a longer cable, this cable is available as
(VMIC Model Number VMIVME-VMXC-7), see Figure 7 on page 12.
The P2 connection to the VMIVME-7589, or the VMIVME-7589A involves the
following board configuration:
1. Ensure that jumper J12 on the VMIVME-7589, or the VMIVME-7589A is
configured to route the signals to the P2 connector. A jumper shunt should be
installed on pins 2 and 3, to utilize the P2 connector. Refer to the Product
Manuals for the jumper configuration.
2. Insert the CPU into the desired slot.
3. Insert the VMIVME-7455 into the desired slot.
4. Install the 64-conductor cable assembly onto the rear of the backplane. The cable
must be connected to the rear I/O shrouded P2 connectors of both slots. One
occupied by the VMIVME-7589, or the VMIVME-7589A and the other connected
to the VMIVME-7455 P2 connector.
Figure 4 64-Conductor Cable Assembly (Model No. VMIVME-VMXC-3)
Connector Side
Cable Side
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Andere VMIC Steuereinheit Handbücher
Beliebte Steuereinheit Handbücher anderer Marken
Festo
Festo Compact Performance CP-FB6-E Stücklistenhandbuch
Elo TouchSystems
Elo TouchSystems DMS-SA19P-EXTME Bedienungsanleitung
JS Automation
JS Automation MPC3034A Bedienungsanleitung
JAUDT
JAUDT SW GII 6406 Series Kurzanleitung
Spektrum
Spektrum Air Module System Bedienungsanleitung
BOC Edwards
BOC Edwards Q Series Bedienungsanleitung
