VOCA TC-X Bedienungsanleitung

Tankless, instant hot and ltered water tap

Instrucon Manual

fresh

28

01

IMPORTANT!

This appliance is not intended for people with physical, sensory or metal

disabilies. Children or people with special needs should be supervised at

all mes while operang it, to ensure their own safety and avoid injuries.

The appliance is intended for households and similar applicaons (e.g. staﬀ

kitchen areas in shops/oﬃces/etc, rural properes, for clients in

hotels/motels/etc, bed and breakfast).

Please pay parcular aenon immediately aer using the appliance/water

tap (especially with higher temperatures sengs) as residual heat may be

present for some me aer use.

To ensure its funconality and safety, please do not alter the product in any

way and only use it for its intended purposes.

To ensure the correct funoning and longevity of the appliance, please

clean it regularly. Do not use any abrasive materials and only use substances

ﬁt for human consumpon.

If the power cord is damaged, please seek qualiﬁed professional help to

ﬁx/replace it to avoid any danger.

Please ensure to remove the power supply before proceeding with any sort

of maintenance.

Please make sure to install the appliance vercally as instructed and in a

safe place, away from water or rain. Excessive humidity or direct sunlight

may aﬀect the normal operaon and longevity of the appliance.

In order to ensure maximum eﬃciency, it may take up to 3-5 seconds before

a temperature above 80° can be reached.

If the water temperature is set more than 3° below the Original Water

temperature, no water will be released.

The warning codes described under secon 19 of this manual only describe

an operaonal issue, not the Main Unit’s failure. Unless the issue is

constantly persistent, it should not constute a wider concern.

For up-to-date informaon and addional ps on how to properly use and

maintain the appliance, please visit our website and social media pages.

Please read the ﬁlter’s literature carefully to ensure appropriate use and

installaon of the product.

fresh

Please read all instrucons carefully

before using the appliance!

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

02

Please fully charge the device prior ﬁrst use (unl the icon disappears)

Important!

Wireless charging area Wireless charging icon

To charge wirelessly, please center the icon on the charging pad (not supplied).

The device cannot be charged wirelessly and through the USB port at the same me!

Important!

As wireless charging can cause the device to heat up considerably, we

recommend to only use it as an emergency/backup opon.

03

fresh

What’s Included

Low Baery Indicator

Charging The Device

Sleep/Wake-up

Wireless Touch Controller Appearance

Touch Display Overview

Touch Faucet - Touch Controls Instrucons

Touch Faucet - Auto-stop Funcon

Main Unit Display

Installaon And Calibraon Process

Selecng The Right Faucet

Pairing The R2 Wireless Touch Controller

Seng Up Filter Monitoring

Cancelling Filter Monitoring

Filter Element Monitoring Icon

Checking The Status Of The Filter Element

Replacing The Filter Element

Quick Memory Programme Seng

Pre-programmed Shortcut Keys

Seng The Desired cc Quanty

Operang With No Set cc Quanty

UV Element (oponal)

Wireless Recepon Icon

Checking The Water Pressure

Changing The Keys Sound

Warning Codes (R2 Wireless Touch Controller)

Table of contents

______________________________________________

01

02

02-1

02-2

03

04

05

05-1

06

07

08

08-1

09

09-1

09-2

10

11

12

13

14

14-1

15

16

17

18

19

04

01 What’s included

Stainless Steel Touch Controlled Faucet

R2 Wireless Touch Controller

Main Unit

USB Charging Cable

Alcohol Sanising Wipe

R2 Wall Mount, R2 Stand

02 Low Baery Indicator

When the baery is low, the icon will appear on the screen.

02-1 Charging The Device

Plug the USB cable and connect the R2 Wireless Touch Controller

to a USB charger or place the device on a compable wireless

charging pad. The icon will start ﬂashing. Once fully charged,

the icon will disappear.

02-2 Sleep/Wake-up

The device will automacally go into sleep mode aer an inacvity

of 10 seconds. To wake it up again, simply tap the display.

Note: the device may wake up in the event of surrounding noise or vibraons.

1x

2x

______________________________________________________

05

fresh

UV

03 Wireless Touch Controller Appearance

Wireless Touch Panel

Stand or wall mount holes / Wireless

charging area

USB charging port

Front

View

Rear

View

Boom

View

06

UV

04 Touch Display Overview

Temperature °C

Quanty

Filter Usage

Error Warning

Wireless recepon

Shortcuts

Quanty Seng

Input Number Keys

Start/Stop Keys

Baery/Charging

UV indicator

Note: when in standby, the given °C shows the original water temperature.

07

fresh

05 Touch Faucet - Controls Instrucons

The touch-enabled faucet is equipped with 3 illuminated pre-set

touch buons. The built-in LED light ensures visibility over the

water level in low-light environment.

To operate it: press a buon once to start the water ﬂow and

press it again to stop. The Hot Water buon has an added

safety feature: press it once (the icon will start to ﬂash), then

press it again to start the water ﬂow. While ﬂashing, the

auto-safety mode will reset itself aer 5 seconds.

Hot Water

between 90-95°C

Warm Water

between 55-60°C

Original Water

05-1 Touch Faucet - Auto-stop Funcon

Touch and hold any buon for 2 seconds: the icon will ﬂash and

the ﬂow will stop automacally aer 200cc.

Touch once (less than 2 seconds): the icon remains on and the

ﬂow will stop automacally aer 2000cc (safety feature).

Note: 1cc = 1ml | 100cc = 10cl | 1000cc = 1lt

08

06 Main Unit Display

Voltage

Current

Temperature

This product heats and supplies ﬁltered water. It does not have a boiling funcon and the

incoming ﬁltered water should meet the drinking water quality standards set by the local

environmental protecon department.

07 Installaon And Calibraon Process

Note: water will be released during the calibraon process.

Aer plugging in the power supply for the ﬁrst me, you can

choose between two opons to calibrate the Main Unit:

Touch Faucet - Touch all three buons at the same

me for 2 seconds. Aer the long beep, press the Warm Water

buon to start the calibraon process.

R2 Wireless Touch Controller - Press the key eight mes to

start the calibraon process.

A long fading beep idicates that the calibraon was successful!

If you hear 3 short beeps the calibraon has failed. Please follow the

troubleshoong guide or contact your supplier.

Note:

09

fresh

08 Selecng The Right Faucet

The system rocognises diﬀerent kind of faucets. The R2 Wireless

Touch Controller needs to be linked with the correct faucet.

Please follow the instrucon below to select the right one.

On the R2 Wireless Touch

Controller press for four

mes, then select your faucet:

Standard Faucet

Touch Faucet

08-1 Pairing The R2 Wireless Touch Controller

If the R2 Wireless Touch Controller cannot be operated, please

follow the instrucons below to pair it with the Main Unit.

(Acvate the pairing mode)

With the Touch Faucet:

Touch all 3 buon

unl you hear the long beep.

Touch the Original Water

buon once, then the

Warm Water buon once.

Go to STEP2.

With the Standard

Faucet: Unplug the

Main Unit for at least 10

seconds, then plug it back

in. You’ll hear a long beep.

On the R2 Wireless Touch

Controller, press for four

mes, then press any number

between .

Press to conﬁrm.

Note: STEP1-2 need to be completed within 10 seconds!

VOCA TC-X Bedienungsanleitung

Beliebte Controller Handbücher anderer Marken