Vollrath Onion King 500N Bedienungsanleitung

Item No. 2350028-1 en Rev 07/14

ENGLISH

Operator’s Manual

Onion King®

500N

501N

502N

503N

Thank you for purchasing this Vollrath Food Processing Equipment. Before operating the equipment, read and familiarize yourself with the

following operating and safety instructions. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE. Save the original box and packaging.

Use this packaging to ship the equipment if repairs are needed.

OperatOr’sManual

ENGLISH

Safety PrecautionS

To ensure safe operation, read the following statements and understand

their meaning. This manual contains safety precautions which are

explained below. Please read carefully.

WARNING

Warning is used to indicate the presence of a hazard that can cause

severe personal injury, death, or substantial property damage if the

warning is ignored.

CAUTION

Caution is used to indicate the presence of a hazard that will or can

cause minor personal injury or property damage if the caution is

ignored.

NOTE

Note is used to notify people of installation, operation, or maintenance

information that is important but not hazard-related.

For Your Safety!

These precautions should be followed at all times. Failure to follow

these precautions could result in injury to yourself and others.

To reduce risk of injury or damage to the equipment:

Check equipment before each use to insure the equipment is clean.

Check for broken, nicked or dull blades and if found, replace the blade

assembly.

Check to insure that the pusher head sits down completely on the rubber

bumpers.

On tabletop models the suction cups will hold the equipment securely to

smooth surfaces.

If necessary, lubricate guide rods using a light coating of mineral oil, Petro

Gel, or food grade lubricant. DO NOT USE COOKING OIL AS IT WILL

BECOME STICKY AND MAY PERMANENTLY DAMAGE THE PUSHER

HEAD BEARINGS

function and PurPoSe

Intended for cutting, dicing and wedging vegetables and fruits.

featureS and controlS

Figure 1. Features and Controls.

APUSHER HEAD ASSEMBLY. Pushes the food product through

the blade assembly.

BHANDLE. Used to lower and raise the pusher head.

CBLADE ASSEMBLY. Houses the blades. Specically sized to

match the corresponding pusher head block.

DSAFETY HANDLE. Held with the left hand during operation to

help avoid injury.

EPUSHER HEAD BUMPER. Cushions the stopping of the

pusher head on the frame.

FBASE ASSEMBLY. Holds the guide rods and parts of the

equipment.

GLEG ASSEMBLY. Supports the equipment.

HPUSHER HEAD FINGERS. Pushes food product between the

blades.

unPacking the equiPment and initial SetuP

Carefully remove crating or packaging materials from the equipment. When

longer needed, dispose of all packaging ,materials in an environmentally

responsible manner.

OperatOr’sManual

ENGLISH

trouBleShooting

If the equiptment no longer processes food cleanly or without damage to the food product, the blades could be dull and be in need of replacement. Broken,

bent, or nicked blades must be replaced.

Problem It might be caused by Course of Action

Broken Blade. Blades were dull. Pre-score whenever possible to avoid undue shock and stress to blades.

Replace blades

SPare PartS liSt - onion king®

LETTER PART NUMBER DESCRIPTION

A 047 BLADE BLOCK PIN (part of Blade Assembly) (NLA - order Blade Assembly)

B 060 RUBBER FOOT (Old Style)

303 RUBBER FOOT, DEEP (New Style)

C 0655 NEOPRENE GASKET

D 414 SCREW, FIL. HEAD, 1/4-20 X 3/4”

E 4422R SCREW, SQ. HEAD, 1/4-20 X 1/2”

504 PUSHER HEAD ASSEMBLY, 3/16” (includes 30 Spacers, 16 Fingers, 2 Rods, 4 Nuts M, X, N)

505 PUSHER HEAD ASSEMBLY, 1/4 or 1/2” (includes 22 Spacers, 12 Fingers, 2 Rods, 4 Nuts M, X, N)

515 PUSHER HEAD ASSEMBLY, 3/8” (includes 14 Spacers 8 Fingers, 2 Rods, 4 Nuts, M, X, N)

G 506 PUSHER HEAD BUMPER

H 507 PUSHER HEAD ASSEMBLY, 503SN (includes Spacers, Fingers, Rods, Nuts M, X, N)

I 5116 SCREW, HEX HEAD, 1/4-20 X 2”, 3/8” ACROSS FLATS

J 5117 BEARING PLATE

K 5118 SCREW, SQ. HEAD, 1/4-20 X 1/2”

L5120 DOUBLE BLADE BLOCK SHIELD FOR 3/16” AND 1/4” CUT, ALSO WITH BLADE ASSEMBLIES

5121 SINGLE BLADE BLOCK SHIELD FOR 3/8” AND 1/2” CUT, ALSO WITH BLADE ASSEMBLIES

M 517 HANDLE CASTING

N 519 ACORN NUT (part of Pusher Head Assembly)

520 BLADE BLOCK, 3/16” CUT

522 BLADE BLOCK, 1/4” CUT

521 BLADE BLOCK, 3/8” CUT

523 BLADE BLOCK, 1/2” CUT, 503N & 503SN

P 525 FRONT LEGS (Longest)

Q 526 REAR LEGS (Shortest)

R 554 BASE FRAME

S 555 VINYL GRIP

T 556 PIVOT ROD

U 558 PIVOT ROD LOCKING COLLAR

V 560 NYLON WASHER

509 BLADE ASSEMBLY 3/16” (includes 13 Blades, 2 Blocks, 4 Pins, 2 Shields)

511 BLADE ASSEMBLY 1/4” (includes 11 Blades, 2 Blocks, 4 Pins, 2 Shields)

510 BLADE ASSEMBLY 3/8” (includes 7 Blades, 2 Blocks, 2 Pins, 2 Shields)

512 BLADE ASSEMBLY 1/2” includes 6 Blades, 2 Blocks, 2 Pins, 2 Shields)

X FINGER RETAINING RODS (part of Pusher Head Assembly)

ENGLISH

OperatOr’sManual

exPloded view - onion king®

H, F

Andere Handbücher für Onion King 500N

Dieses Handbuch passt für folgende Modelle

Andere Vollrath Küchengerät Handbücher

Vollrath

Vollrath SLM330E/S Bedienungsanleitung

Vollrath

Vollrath Wedgemaster II 700-1 Bedienungsanleitung

Vollrath

Vollrath Lobster King 1851 Bedienungsanleitung

Vollrath

Vollrath 40952 Bedienungsanleitung

Vollrath

Vollrath 40794 Bedienungsanleitung

Vollrath

Vollrath Redco InstaCut 3.5 15001 Bedienungsanleitung

Vollrath

Vollrath SLR7912/N Bedienungsanleitung

Vollrath

Vollrath VPP16 Bedienungsanleitung

Vollrath

Vollrath Redco Instacut 5.0 Bedienungsanleitung

Vollrath

Vollrath Cayenne TSI7001 Bedienungsanleitung

Vollrath

Vollrath JW1 Bedienungsanleitung

Vollrath

Vollrath 7217210 Bedienungsanleitung

Vollrath

Vollrath SLR7009/N Bedienungsanleitung

Vollrath

Vollrath Lettuce King I 400N Bedienungsanleitung

Vollrath

Vollrath JW30PA Bedienungsanleitung

Vollrath

Vollrath MGD18 Bedienungsanleitung

Vollrath

Vollrath CGA8008 Bedienungsanleitung

Vollrath

Vollrath Medio Service-Handbuch

Vollrath

Vollrath SLP300A/S Bedienungsanleitung

Vollrath

Vollrath VP16 Bedienungsanleitung

Vollrath

Vollrath SLM250/S Bedienungsanleitung

Vollrath

Vollrath 47704 Bedienungsanleitung

Vollrath

Vollrath JW30PA Bedienungsanleitung

Vollrath

Vollrath 40802 Kurzanleitung

Beliebte Küchengerät Handbücher anderer Marken

Tayama

Tayama TYG-35AF Bedienungsanleitung

AEG

AEG 43172V-MN Bedienungsanleitung

REBER

REBER Professional 40 Benutzerhandbuch

North American

North American BB12482G / TR-F-04-B-NCT-1 Bedienungsanleitung

Presto

Presto fountain popper Bedienungsanleitung

Westmark

Westmark 1035 2260 Bedienungsanleitung

Zanussi

Zanussi ZCG64396XA Bedienungsanleitung

HOFFEN

HOFFEN SM-9302M Bedienungsanleitung

Philips

Philips HD3133 Bedienungsanleitung

Ronco

Ronco Beef Jerky Bedienungsanleitung

Hendi

Hendi 470411 Bedienungsanleitung

Livoo

Livoo MEN386 Bedienungsanleitung

croydon

croydon WR-10313-700 Bedienungsanleitung

Chefman

Chefman RJ43-SQ Series Bedienungsanleitung

Vacmaster

Vacmaster VP680 Bedienungsanleitung

Jetmaster

Jetmaster 900HG Bedienungsanleitung

Küppersbusch

Küppersbusch EEH 610.0 Kurzanleitung zur Einrichtung

HURAKAN

HURAKAN HKN-F10 Bedienungsanleitung