VOLTCRAFT DSO4000B Series Bedienungsanleitung

Digital Storage Oscilloscope I

DSO4000B(C) Series

Digital Storage Oscilloscope

User Manual

（Version 1.0）

Digital Storage Oscilloscope II

form or by any means, electronic or mechanical, without prior written permission from

Hantek Technologies Co., Ltd (hereinafter referred to as ‘Hantek’).

Hantek reserves all rights to modify this document without prior notice. Please contact

Hantek for the latest version of this document before placing an order.

Hantek has made every effort to ensure the accuracy of this document but does not

guarantee the absence of errors. Moreover, Hantek assumes no responsibility in

obtaining permission and authorization of any third party patent, copyright or product

involved in relation to the use of this document.

Digital Storage Oscilloscope III

General Safety Summary

Read the following safety precautions to avoid injury and prevent damage to this

product or any products connected to it. To evade potential hazards, use this product

only as specified.

Only qualified personnel should perform maintenance.

Avoid fire or personal injury.

Use suitable power cord. Use only the power cord specified for this product and

certified for the country of use.

Connect and disconnect properly. Connect a probe with the oscilloscope before it is

connected to measured circuits; disconnect the probe from the oscilloscope after it is

disconnected from measured circuits.

Ground the product. This product is grounded through the grounding conductor of the

power cord. To avoid electric shock, the grounding conductor must be connected to

earth ground. Before making connections to the input or output terminals of the product,

ensure that the product is properly grounded.

Connect the probe in a right way. The probe ground lead is at ground potential. Do

not connect the ground lead to an elevated voltage.

Check all terminal ratings. To avoid fire or shock hazard, check all ratings and

markings on the product. Refer to the product manual for detailed information about

ratings before making connections to the product.

Do not operate without covers. Do not operate this product with covers or panels

removed.

Avoid exposed circuitry. Do not touch exposed connections and components when

power is present.

Do not operate with suspected failures. If you suspect there is damage to this

product, have it inspected by qualified service personnel.

Assure good ventilation.

Do not operate in wet/damp environments.

Do not operate in an explosive atmosphere.

Keep product surfaces clean and dry.

Digital Storage Oscilloscope IV

Safety Terms and Symbols

Terms on the product. The following terms may appear on the product:

Danger It represents that harms may be caused to you at once if you perform the

operation.

Warning It represents that latent harms may be caused to you if you perform the

operation.

Notice It represents the damage possibly caused to the product or other

properties if you perform the operation.

Characters on the product. The following characters may appear on the product:

Product Scrapping

Device Recycling

We need extract and utilize natural resources to produce this device. If you do not

reclaim the device in a proper way, some substances it contains may become harmful

or poisonous to environments or human bodies. To avoid them being released outside

and to minimize the waste of natural resources, we suggest you reasonably call back

this device to ensure proper recovery and recycling of most materials within it.

Notice

Please read

the manual

Protective

ground terminal

Measuring

ground terminal

Chassis

ground terminal

Digital Storage Oscilloscope IV

Brief Introduction to the Series of digital

storage oscilloscope

DSO4000B(C) Series oscilloscopes cover the bandwidths from 80MHz to 200MHz,

and provide the real-time up to 1GSa/s. In addition, they have 7 inch color TFT LCD as

well as WINDOWS-style interfaces and menus for easy operation.

What’s more, the plenty menu information and the easy-to-operate buttons allow you to

gain information as much as possible in measurement; the multifunctional knobs and

the powerful shortcut keys help you save a lot of time in operation; theAutoset function

lets you detect sine and square waves automatically; the Probe Check Wizard guides

you to adjust the probe compensation and set the Probe option attenuation factor. By

using the three methods the oscilloscope provides (context-sensitive, hyperlinks, and

an index), you may master all operations on the device in quite a short time so as to

greatly improve your efficiency in production and development.

Model

Channels

Bandwidth

Sample Rate

AFG

DSO4084B

80MHz

1GS/s

DSO4104B

100MHz

1GS/s

DSO4204B

200MHz

1GS/s

DSO4254B

250MHz

1GS/s

DSO4084C

80MHz

1GS/s

Yes

DSO4104C

100MHz

1GS/s

Yes

DSO4204C

200MHz

1GS/s

Yes

DSO4254C

250MHz

1GS/s

Yes

Digital Storage Oscilloscope V

Contents

General Safety Summary ......................................................................................III

Safety Terms and Symbols................................................................................... IV

Product Scrapping................................................................................................ IV

Brief Introduction to the Series of digital storage oscilloscope............................... IV

Contents ................................................................................................................... V

Chapter 1 Introduction........................................................................................1

1.1 General Inspection ...................................................................................2

1.2 Prepare Instrument for Use.......................................................................3

1.3 Accidence of front panel and the user interface ........................................1

1.3.1 User Interface......................................................................................1

1.4 Functional Check......................................................................................3

1.4.1 Connect the oscilloscope .....................................................................3

1.4.2 Observe the waveform.........................................................................3

1.5 Probe Introduction....................................................................................4

1.5.1 Safety ..................................................................................................4

1.5.2 Use of Probe Check Wizard.................................................................4

1.5.3 Manual Probe Compensation...............................................................4

1.5.4 Probe Attenuation Setting.....................................................................5

Chapter 2 Function Introduction........................................................................7

2.1 Menu and control keys..............................................................................8

2.2 Connector.................................................................................................9

2.3 Default setups...........................................................................................9

2.4 Multi-functional Knobs and Buttons.........................................................10

2.5 Oscilloscope Setup.................................................................................10

2.6 Horizontal Controls.................................................................................11

2.6.1 Scan Mode Display (Roll Mode).........................................................12

2.7 Vertical System.......................................................................................12

Digital Storage Oscilloscope VI

2.7.1 Vertical Controls.................................................................................12

2.7.2 Math FFT...........................................................................................15

2.8 Trigger System .......................................................................................20

2.8.1 Trigger Controls .................................................................................21

2.8.2 Holdoff...............................................................................................40

2.9 SAVE/RECALL.......................................................................................40

2.10 MEASURE System.................................................................................42

2.10.1 Scale measurement.......................................................................42

2.10.2 Cursor measurement.....................................................................43

2.10.3 Automatic Measurement................................................................44

2.11 ACQUIRE...............................................................................................47

2.12 DISPLAY ................................................................................................51

2.12.1 XY Format.....................................................................................51

2.13 UTILITY System .....................................................................................52

2.13.1 51BFirmware Update...........................................................................52

2.13.2 52BSelf Calibration..............................................................................53

2.13.3 56BPass/fail ........................................................................................53

2.14 Fast Action Buttons.................................................................................55

2.14.1 AUTOSET.....................................................................................55

2.14.2 Default Setup ................................................................................57

Chapter 3 Waveform Generator........................................................................60

Chapter 4 Troubleshooting...............................................................................62

4.1 Problem Settlement................................................................................62

Chapter 5 Services and Support......................................................................90

Chapter 6 General Care and Cleaning .............................................................91

6.1 General Care..........................................................................................91

6.2 Cleaning.................................................................................................91

Appendix A: Technical Specifications ...................................................................92

Appendix B: Accessories .......................................................................................99

Digital Storage Oscilloscope VII

Appendix C Harmful and Poisonous Substances or Elements..........................100

Chapter 1 Introduction

General Inspection

Prepare Instrument for Use

Accidence of front panel and the user interface

Functional Check

Probe Introduction

1.1 General Inspection

Please check the instrument as following steps after receiving an oscilloscope:

Check the shipping container for damage:

Keep the damaged shipping container or cushioning material until the contents of

the shipment have been checked for completeness and the instrument has been

checked mechanically and electrically.

Check the accessories:

Accessories supplied with the instrument are listed in "Accessories" in this guide. If

the contents are incomplete or damaged, please notify the franchiser.

Check the instrument:

In case there is any mechanical damage or defect, or the instrument does not

operate properly or fails performance tests, please notify the franchiser.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere VOLTCRAFT Prüfgeräte Handbücher

VOLTCRAFT

VOLTCRAFT DSO-6084F Bedienungsanleitung

VOLTCRAFT

VOLTCRAFT RT-100 Bedienungsanleitung

VOLTCRAFT

VOLTCRAFT BFT-1 Bedienungsanleitung

VOLTCRAFT

VOLTCRAFT MS-444 Bedienungsanleitung

VOLTCRAFT

VOLTCRAFT GT-6000 Bedienungsanleitung

VOLTCRAFT

VOLTCRAFT MS-210 Bedienungsanleitung

VOLTCRAFT

VOLTCRAFT 2633264 Bedienungsanleitung

VOLTCRAFT

VOLTCRAFT KBM-110 Bedienungsanleitung

VOLTCRAFT

VOLTCRAFT MS-229 Bedienungsanleitung

VOLTCRAFT

VOLTCRAFT MS-440 Bedienungsanleitung

VOLTCRAFT

VOLTCRAFT DSO-2104 Bedienungsanleitung

VOLTCRAFT

VOLTCRAFT MS-540 Bedienungsanleitung

VOLTCRAFT

VOLTCRAFT MSO-2072USB Bedienungsanleitung

VOLTCRAFT

VOLTCRAFT DSO Four-Channel Series Bedienungsanleitung

VOLTCRAFT

VOLTCRAFT DSO-2104 Bedienungsanleitung

VOLTCRAFT

VOLTCRAFT BT-501 Bedienungsanleitung

VOLTCRAFT

VOLTCRAFT DSO-2072H Originalbetriebsanleitung

VOLTCRAFT

VOLTCRAFT DSO-111 Bedienungsanleitung

VOLTCRAFT

VOLTCRAFT PH-410 Bedienungsanleitung

VOLTCRAFT

VOLTCRAFT 12 01 87 Bedienungsanleitung

VOLTCRAFT

VOLTCRAFT DSO-2072H Bedienungsanleitung

VOLTCRAFT

VOLTCRAFT BS-600SD Bedienungsanleitung

VOLTCRAFT

VOLTCRAFT VC1T Bedienungsanleitung

VOLTCRAFT

VOLTCRAFT VC35 Bedienungsanleitung

Beliebte Prüfgeräte Handbücher anderer Marken

SMART

SMART KANAAD SBT XTREME 3G Series Bedienungsanleitung

Agilent Technologies

Agilent Technologies BERT Serial Bedienungsanleitung

Agilent Technologies

Agilent Technologies N3280A Bedienungsanleitung

Lifeloc

Lifeloc R.A.D.A.R. Bedienungsanleitung

Fluke

Fluke T5-600 Bedienungs- und Montageanleitung

Mercury

Mercury TSL01 Bedienungsanleitung

MAHA

MAHA MBT Series Bedienungsanleitung

Fuji Electric

Fuji Electric P-61 Bedienungsanleitung

ETC

ETC SealerAtor Bedienungsanleitung

Skyfine

Skyfine ETHYWAY V2 Bedienungsanleitung

Appion

Appion G5 Twin Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 8159-0112A Bedienungsanleitung

BW Technologies

BW Technologies MicroDock II Bedienungsanleitung

Sun Nuclear

Sun Nuclear 1027 Bedienungsanleitung

Biomark

Biomark HPR LITE READER Bedienungsanleitung

Hioki

Hioki 3169-20 Bedienungsanleitung

Ashcroft

Ashcroft ATE-100 Bedienungsanleitung

Rohde & Schwarz

Rohde & Schwarz RTA4000 Bedienungsanleitung