Vox Valvetronix VT Series Produktinformationsblatt

1. Turning the Vox Valvetronix VT Amp on and getting sound.

Make sure the Amp is plugged into a wall outlet, and your guitar cable is plugged into the amp’s input. Turn

on the amps on switch; remember to give the power tube a short time to warm up. Check to make sure the

guitar’s volume is up. Next, turn the amp’s Master Volume up, to the desired listening level. (Make sure the

Power Level knob on the amps back panel is turned up).

VALVETRONIX

TUB E

MODELING AMPS

2. Selecting preset amp models.

Press the Preset Mode button, found under the Amp

Models, next to the input, to access Preset Mode. Use the

chicken head knob, just above the Preset Mode button,

to select and scroll through the different Amp Models.

Each of the 11 amp model positions have two models,

to give a total of 22 amp models, which may be selected

by pressing the A: Green B: Red button, located between

the amp Models and the Gain knob. When the LED is lit

Green, the Amp Model on the top row is selected. When

the mode button LED is lit Red, the Amp Model on the

bottom row is then selected.

The VT has 66 actual presets, in Preset Mode. Press the

Preset Mode button to select the three different modes.

When (P1) Green is selected, you have accesses to 22

“dry or slightly effected” presets. When (P2) Orange is

selected, you have accesses to 22 “wet or effected”

presets, having many of the VT’s effects already assigned

to them.

The (P1) Red mode gives you access to 22 “Artist” presets.

These presets give the tones of the songs that are listed,

on the glossy POP, positioned on top of the amp.

4. Editing the Effects.

The VT’s effects section may be edited. Use the Edit Knob (Edit 1); to dial in how much of the overall effect

is in the mix. Hold down the TAP button while turning the Edit Knob (Edit 2), to change a particular parameter

(depending on the effect selected). Hold down the Bypass button, while turning the Edit Knob (Edit 3), to change

another effect parameter. You can also tap the Tap, to a tempo, to set Delay Time and Modulation speed of

the effects. To hear the amp dry, you can simply press the Bypass button to bypass the effects. The glossy

POP on the top of the Amp tells you what parameters the edits are affecting. Notice that the VT series has an

independent Reverb circuit. The Reverb can be turned up and down by utilizing the Reverb Knob on top of the

amp’s face plate.

3. Using the Banks and Programs.

Press the User Programs button to access program mode. Use the Bank button to select either Green or Red. The

Green Bank has 4 programs, and the Red Bank has 4 separate programs, allowing the VT to save and change

up to 8 programs total. These 8 programs serve as an additional 8 presets. Remember; let the presets do the

work, as there are many styles and effects, already dialed in, among the presets.

5. Storing Settings

To save your personal settings, you need to be in User Program Mode, and use the chicken head knobs to adjust

the amp, and use the effects section to dial in any desired effects. To store your settings, hold down any one

of the 4 program buttons for two seconds, and your new settings will be saved to that program location.

Note: You cannot store programs that were altered in Manual Mode or Preset Mode. To save your programs, you

must dial in the settings in the User Program Mode only. (Refer to section 5 for how to store programs).

6. Using Manual Mode

In Manual Mode, the Knobs are as they appear

on the amp’s face plate. However, In Preset

and User Program Modes, the knobs will not

represent the actual stored settings.

To access Manual Mode, simply press the

Manual Button. Now you can dial in any desired

settings, using any or all of the Chicken Head

knobs, on the face plate. You can also adjust

the effects section. (Refer to section 4 for

how to edit the effects).

7. Using the Power Level on the Back Panel

The power level knob on the VT’s rear panel may be used to turn down the amp’s overall volume.

Tone Tip: You may want to crank the amp’s Master volume, to get the interaction from the Tube Power section to

achieve optimum tone, and use the Power Level on the back panel, to adjust the amp’s output, to a reasonable

listening volume.

Inhaltsverzeichnis

Andere Vox Verstärker für Musikinstrumente Handbücher

Vox

Vox amPlug2 AC30 Bedienungsanleitung

Vox

Vox VT100X Bedienungsanleitung

Vox

Vox AC15C1 Bedienungsanleitung

Vox

Vox AC1RV Bedienungsanleitung

Vox

Vox AC4C1-MINI Bedienungsanleitung

Vox

Vox AC4HW1 Bedienungsanleitung

Vox

Vox TB18C1 Bedienungsanleitung

Vox

Vox Valvetronix AD120VTX Montage- und Bedienungsanleitung

Vox

Vox MINI SUPERBEETLE Bedienungsanleitung

Vox

Vox MINI SUPERBEETLE Bedienungsanleitung

Vox

Vox AC15H1TV Bedienungsanleitung

Vox

Vox Brian May MV50 Series Bedienungsanleitung

Vox

Vox Valvetronix VT20+ Bedienungsanleitung

Vox

Vox SIGNATURE Series Bedienungsanleitung

Vox

Vox AC100CPH Bedienungsanleitung

Vox

Vox AC30CC2 Bedienungsanleitung

Vox

Vox AC15C1 Bedienungsanleitung

Vox

Vox Pathfinder 15SMR Bedienungsanleitung

Vox

Vox AC15VR Bedienungsanleitung

Vox

Vox AC30C2X Bedienungsanleitung

Vox

Vox AmPlug AC30 Bedienungsanleitung

Vox

Vox DA15 Bedienungsanleitung

Vox

Vox AC4TVH Bedienungsanleitung

Vox

Vox AC30CC1 Bedienungsanleitung

Beliebte Verstärker für Musikinstrumente Handbücher anderer Marken

Peavey

Peavey Wiggy Bedienungsanleitung

acus

acus One Forstreet 10 Bedienungsanleitung

Marshall Amplification

Marshall Amplification MG10KK Bedienungsanleitung

Pyle Pro

Pyle Pro PPG860A Bedienungsanleitung

Laney

Laney BC30 Bedienungsanleitung

Marshall Amplification

Marshall Amplification JVM205C Bedienungsanleitung

Crate

Crate Professional BV-120H Bedienungsanleitung

Peavey

Peavey Basic 60 Bedienungsanleitung

Fender

Fender Bassman 1200 Bedienungsanleitung

ZT Club Bedienungsanleitung

Ibanez

Ibanez IFS2X Bedienungsanleitung

Crate

Crate GLX1200H Bedienungsanleitung

Laboga

Laboga THE BEAST Bedienungsanleitung

Falken1

Falken1 Traveller Pro Bedienungsanleitung

Hughes & Kettner

Hughes & Kettner Bass Kick 303 Bedienungsanleitung

Yamaha

Yamaha GA-10 Bedienungsanleitung

Engl

Engl Powerball-2 Service-Handbuch

Gibson

Gibson GA5WTR Kurzanleitung