Voxx Electronics Prestige PE1BTWZ Bedienungsanleitung

Owner’s Guide

For Models:

PE1BTWZ

IMPORTANT NOTE: The operation of the Security and Convenience System as described in this manual is

applicable to most vehicles. However, due to the conguration of some vehicles, some functions AND/OR

SAFETY PRECAUTIONS may not apply. Please see your installing dealer for more information.

APSSECRS

RF Upgrade Kit

2APSSECRS PE1BTWZ Owners revA

Table of Contents

Using Your Remote Control.................................................................... 3

Arming the Security System .............................................................. 3

Disarming the Security System ......................................................... 3

Two Stage Door Unlock (optional)..................................................... 3

Bypassing the Shock Sensor ............................................................ 3

Alarm City Mode................................................................................ 4

User Selectable Notication Chirps................................................... 4

User Selectable LED ......................................................................... 4

Programmed Transmitter Notication................................................ 4

Valet Mode ........................................................................................ 5

Manually Overriding the Security System ......................................... 5

Using Your Remote Vehicle Starter ....................................................... 7

Remote Starting Your Vehicle............................................................ 7

Remote Start Shutdown .................................................................... 7

Entering Your Vehicle while it is Running via Remote Start .............. 7

Preheating or Precooling the Vehicle’s Interior ................................. 7

Remote Start Safety Features........................................................... 7

Remote Start Ready Mode................................................................ 8

Enter & Exiting the Vehicle - Remote Start Ready Mode .................. 8

Cancelling Remote Start Ready Mode .............................................. 9

Using the “Quick-Stop” Feature......................................................... 9

Turbo Timer Mode (optional) ........................................................... 10

Status LED, Light Flashes and Siren/Horn Indications ..................... 11

Replacing Remote Control Batteries................................................... 13

Warranty Information ............................................................................ 14

Arming the Security System

To arm the system, exit the vehicle, close all doors, then press the button. The

parking lights will ash 1 time, indicating the system is armed, has locked the doors

(if equipped and connected) and activated the starter disable feature. The LED status

indicator will blink steadily, once per second.

NOTE: The system is equipped with a feature called Silent Choice. If enabled,

the system requires a second press of the button to activate an audible arming

response from the vehicle.

*Throughout this manual, ‘press’ refers to pressing for less than 1 second; ‘press and hold’ refers to pressing for more

than 3 seconds.

Using Your Remote Control

Two Stage Door Unlock (Optional)

If this feature is enabled on your system, pressing the button 2 times will unlock

only the driver’s door. Press 2 times again within three seconds to unlock the

remaining doors.

Disarming the Security System

To disarm the system press the button 2 times. The parking lights will ash 1

time, indicating the system is disarmed and has unlocked the doors (if equipped and

connected).

NOTE: The system is equipped with a feature called Silent Choice. If enabled,

the system requires a second double press of the button to activate an audible

disarming response from the vehicle. If your system is set up for 2 step unlock, a third

press of unlock will activate the audible response.

Bypassing The Shock Sensor

The included security shock sensor has two stages of detection, Warn-Away and Full

Trigger. To arm the system and shock sensor press the button. The system will

beep and the lights wil ash 1 time.

To Arm the system and bypass the Warn-Away detection stage press the button 2

times within 5 seconds.

To Arm the Alarm the bypass both detection stages press the button 3 times within

5 seconds.

4APSSECRS PE1BTWZ Owners revA

Programmed Transmitter Notication

As a security precaution each time the vehicle’s ignition is turn on the status LED

light with ash the number of transmitters programmed into the system. This helps

to identify unauthorized transmitters from accessing your vehicle. If you believe an

unauthorized transmitter has been programmed to your system, contact your installing

dealer for assistance.

User Selectable Notication Chirps

System ARM/DISARM chirps can be toggled ON or OFF without entering the

programming feature banks.

1. Turn the ignition ON then OFF.

2. Press and release the valet/programming button 3 times. The system

will respond with 1 chirp for ON or 2 chirps for OFF.

User Selectable LED

This feature will control whether the LED is ON or OFF when the system is Armed/

Locked and can be toggled ON or OFF without entering the programming feature

banks.

1. Turn the ignition ON, OFF, ON, OFF.

2. Press and hold the valet/programming button for 5 seconds. The system

LED will respond with 1 ash for ON or 2 ashes for OFF.

City Mode

City Mode allows the user to change the sound of the alarm system to make it easily

identied when the alarm is trigger. To enter City Mode press the button 4 times

within 10 seconds.

Valet Mode

When valet mode is activated the status LED will light solid, and all security and

remote start functions will be disabled. To enter or exit valet mode simply follow the

steps outlined below:

1. Turn the vehicle’s ignition ON.

2. Push and hold the programming/valet button.

3. The LED will turn on solid when valet mode is active

4. Release the programming/valet button.

Manually Overriding the Security System

Your system can be disarmed without the use of the transmitter. This is necessary to

operate your vehicle if the transmitter is lost or its battery fails. To by-pass the alarm

system;

1. Open the vehicle door. The alarm will sound.

2. Turn the ignition key to the ON position.

3. Within 10 seconds, press and release the valet push button switch.

The alarm system will stop sounding and enter the (by-passed) mode. You can now

start and operate the vehicle normally.

Stand Alone Valet Override (Optional)

Your system can be disarmed without the use of the transmitter or valet button. This

is necessary, since you will need the ability to operate your vehicle if the transmitter

is lost or its battery fails. To by-pass the alarm system;

1. Open the vehicle door. The alarm will sound.

2. Cycle the ignition key ON, OFF, ON.

3. Within 10 seconds, press and release the Brake pedal 3 times.

The alarm system will stop sounding and enter the (by-passed) mode. You can now

start and operate the vehicle normally. This feature must be programmed ON by an

autorized dealer.

6APSSECRS PE1BTWZ Owners revA

Custom Code Valet Override (Optional)

Unlike the default Valet Override, Custom Code Override is a user personalized

code that o󰀨ers a higher lever of security. If the user chooses to use Custom Code

Override, Feature Bank 2 ; Feature 9 must be programmed for “Custom Code”. Once

the option has been selected the code must be programmed. Once the Custom Code

is programmed it cannot be changed without rst disarming the alarm.

Custom Code Override Procedure

The Custom Code is made up of 2 numbers. Each chosen number must be between

digits 1-9. The default Custom Code is “11”. To disarm the alarm using the Custom

Code option:

1. Turn the vehicle ignition to ON.

2. Within 5sec, Press the valet button 1x.

3. Within 5sec, Turn the ignition OFF/ON.

4. Within 5sec, Press the valet button 1x.

5. Turn the vehicle ignition to OFF then ON to start the vehicle.

Custom Code Programming Procedure

In this example, the user has selected Custom Code “23”. To program a user

selected custom code:

Start with the alarm disarmed.

1. Turn the ignition to the ON position

2. Within 10sec, press the valet button 3x to enter programming.

3. Within 10sec, Cycle the ignition OFF/ON, OFF/ON, OFF/ON. The system will

beep 1x.

4. Within 10sec, Press the valet button 2x. This number will indicate the rst digit

of the chosen Custom Code.

5. Within 10sec, Cycle the ignition OFF/ON.

6. Within 10sec, Press the valet button 3x. This number will indicate the second

digit of the chosen Custom Code.

7. Cycle the ignition OFF.

If the Custom Code was accepted the LED will ash the rst number (2), pause, then

the second number (3). This will repeat 2 more times to conrm the Custom Code

entry. If after 15sec the LED does not ash please repeat steps 1-7.

Using Your Remote Starter

Remote Starting Your Vehicle

To activate the remote start function, press and hold the button for 3 seconds. The

system will sound, the parking lights will ash 1 time and the system will check the

vehicle to ensure it is safe to start. If all safety parameters are correct, the vehicle will

start. The vehicle’s parking lights will turn on (or ash depending on system settings)

as a visual indication that the vehicle has started and is running.

If your vehicle stalls or does not start, the system will pause 5 seconds, then try

3 more times to start the vehicle (a total of 4 attempts). The system will pause 5

seconds between each start attempt.

Remote Start Shutdown

Press and hold the button for 3 seconds again to turn the vehicle o󰀨.

Entering the Vehicle while it is Running via Remote Vehicle Start

1. Unlock the vehicle’s doors.

2. Enter the vehicle. DO NOT PRESS THE BRAKE PEDAL!

3. Insert the key into the ignition switch and turn to the ON or RUN

position.

4. Press the brake pedal. The remote vehicle starter will disengage and

the vehicle will operate normally.

Preheating or Precooling the Vehicle’s interior

Before exiting the vehicle, set the temperature controls to the desired setting and

operation. After the system starts the vehicle, the heater or air conditioner will

activate and heat or cool the vehicle’s interior to your setting.

Remote Start Safety Features

For safety and security reasons, the system will shutdown or prevent the remote

vehicle starter from activating if any of the following occur:

1. The vehicle’s hood is open.

2. The brake pedal is pressed prior to turning the ignition key to the ON

position.

3. The engine is over-revved (tach checking only).

4. Valet Mode is active. Refer to the Valet Mode section of this manual on

page 5.

5. Remote Start Ready Mode is not set. Manual transmission vehicle’s only.

8APSSECRS PE1BTWZ Owners revA

To Enter & Exit the Vehicle while (Manual Transmission) Remote Start Ready

Mode is already active without cancelling Remote Start Ready Mode.

If ready mode has already been activated and you need to enter the vehicle, possibly

to retrieve an item, and will exit the vehicle without driving it, you can keep ready

mode active by following the steps below.

1. With Ready Mode already previously set, activate the remote start.

2. While under control of the remote start open vehicle door to retrieve

items.

3. Exit the vehicle and close all doors.

4. Press the button, the unit waits 3 seconds and then shuts down,

the system will verify all doors have been closed then will emit the 2

short/1 long tone and light ash pattern indicating Manual Transmission

Ready Mode is active.

Note: If the 2 short/1 long tone is not heard then Ready Mode has not been

set.

Remote Start Ready Mode - Manual Transmission Vehicles Only

To activate the remote start function, the system must rst be in Remote Start Ready

Mode. Follow the steps below to enter remote start ready mode.

1. While the engine is running by the ignition key;

a. Place the transmission in neutral.

b. Set the parking brake

2. With your foot o󰀨 the brake pedal, press and old the button to

activate the remote start. The remote will beep 4 times and the parkinglights

will turn on to conrm the system has remote started.

3. Remove the keys from the ignition, the vehicle will remain running.

4. Exit the vehicle and close all vehicle doors.

5. Within 1 minute of step 1, press the 1 time button to lock the vehicle’s

doors. The vehicle will shutdown and sound 2 short chirps then 1 long chirp

to conrm ready mode is set.

Remote Start Ready Mode must be enabled if your vehicle is equipped with a

manual transmission.

Using the “Quick-stop” Feature

If you want to make a short stop and keep your vehicle running (to keep the interior

warm or cool), the quick-stop feature allows you to do this while keeping your vehicle

secure and your keys with you.

To engage Quick Stop:

1. Stop the vehicle and place the transmission in PARK.

2. With your foot o󰀨 the brake pedal, press and hold the button

times within 2 seconds. The LED will ash 3 times to conrm quick

stop is entered.

3. Remove the keys from the ignition and exit the vehicle. Press the

button to lock the vehicle’s doors if desired.

Note: Do not leave children or animals unattended in the vehicle when using the

quick-stop feature.

Cancelling Remote Start Ready Mode - Manual Transmission Vehicles Only

The system will exit remote start ready mode if any of the following occur:

Open any door

Open the hood or trunk (if connected)

Press the brake

Release the parking brake

Turn the ignition ON

10 APSSECRS PE1BTWZ Owners revA

Turbo Timer (Optional)

This option will keep the engine running to allow the vehicle’s turbo to properly cool

down before shutting the engine o󰀨.

To engage the Turbo Timer feature:

1. With the vehicle running via the ignition key and your foot o󰀨 of the

brake pedal.

2. Engage the vehicle’s parking brake.

3. The vehicle’s parking lights will turn on to verify the Turbo Timer

feature has been activated.

4. Turn the ignition key OFF, the vehicle will continue to run until the pre-

programmed time has elapsed (1, 3, or 5 minutes)

To disengage the turbo timer feature, press the vehicle’s brake pedal.

Andere Handbücher für Prestige PE1BTWZ

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Voxx Electronics Fernbedienung Handbücher

Voxx Electronics

Voxx Electronics PurSuit PR1BZ Bedienungsanleitung

Beliebte Fernbedienung Handbücher anderer Marken

Panasonic

Panasonic EUR7622KB0 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen Beo4 Bedienungsanleitung

Sunwave Tech.

Sunwave Tech. RemoteComm SRC-7000 Bedienungsanleitung

FUTABA

FUTABA 9ZAP - PART2 Bedienungsanleitung

HR Matic

HR Matic HR MULTI 3 Bedienungsanleitung

Yamaha

Yamaha ACC-GNRST-30-20 Bedienungsanleitung

Marantz

Marantz RC101 Bedienungsanleitung

Anritsu

Anritsu MP1777A Bedienungsanleitung

Niles

Niles WVC100 Fehlerbehebungshandbuch

Bang & Olufsen

Bang & Olufsen BEO6 Bedienungsanleitung

GE 94901 Bedienungsanleitung

Onbon

Onbon YQ1-75 Bedienungsanleitung

FUTABA

FUTABA R7108SB Montageanleitung

Invacare

Invacare G91S Bedienungsanleitung

JR Racing

JR Racing XR2 Bedienungsanleitung

Philips

Philips SBCRU130/00U Bedienungsanleitung

Philips

Philips Prestigo SRT9320 Bedienungsanleitung

Vicon

Vicon VNCTRL-1 Bedienungsanleitung