VPI MONTEST-DA Bedienungsanleitung
1
Handheld Signal Generator
USER MANUAL
2
Table of Contents
1. BEFORE YOU START 3
2. PRODUCT'S COMPOSITION 4
3. ABOUT ODSG-02C 5
3.1 THE DEFINITION 5
3.2 THE FEATURES 5
3.3 THE SPECIFICATION 6
3.4 POWER CONSIDERATIONS 6
4. ENVIRONMENTAL AND RELIABILITY SPECIFICATIONS 6
5. EACH PART'S NAME AND FUNCTION 7
5.1 FRONT VIEW 7
5.2 SIDE VIEW 7
6. INITIAL SETTING MENU 9
6.1 USING INITIAL SETTING MENU 9
6.2 INITIAL LCD WINDOW, AFTER POWER ON 9
6.3 INITIAL DISPLAY SCREEN, AFTER POWER ON 9
6.4 INITIAL MENU SETUP SCREEN 9
7. HOW TO PLAY EACH FUNCTION 10
7.1 HOW TO PLAY THE IMAGES 10
7.2 HOW TO PLAY THE VIDEO 11
7.3 HOW TO PLAY THE AUDIO 12
8. PC DOWNLOAD 13
8.1 USB 13
9. A/S SERVICE 14
9.1 CUSTOMER'S RIGHT 14
9.2 WARRANTY LIMITATIONS AND EXCLUSION 14
9.3CONTACT 14
10. APPENDIX 15
10.1 PATTERN IMAGES 15
10.2 FIXED DEFAULT TIME DATA (DEFAULT) 16
10.3 RS-232C COMMUNICATION COMMAND 17
3
1. Before You Start
WARNING: To prevent any risk from your workstation, please beware of important safety
instruction as below;
AC POWER
Unplug the Power Cord of ODSG-02C, after turning off the power switch on the side panel.
The power cord should be unplugged from the outlet, when left unused for a long period of
time. The power cord should be routed so that they are not likely to be walked on or pinched
by items placed upon or against them.
OBJECT AND LIQUID ENTRY
Never push objects of any kind into this product through openings as they may touch
dangerous voltage points or short-out parts that could result in a fire or electric shock. Never
spill liquid of any kind on the product.
WATER AND DUST
Do not use it near wet or dirty place.
SHOCK DAMAGE
Do not shock or heat.
THE SETUP METHOD
Do not place it on an unstable cart or table etc.
TROUBLESHOOTING
Do not attempt to service this product yourself by opening or removing covers. It may expose
you to dangerous voltage or other hazards. Refer all services to qualified service personnel.
REFERENCE: International Electrical Symbols
On / Off Switch
Conforms to European Union directives
High Definition Multimedia Interface
4
2. Product's Composition
The signal pattern generator, ODSG-02C includes accessories as below.
zAC/DC Adapter (12V/5A)
zPower Cable
zUSER MANUAL
zDVI CABLE
zUSB CABLE
5
3. About ODSG-02C
3.1 The Definition
This ODSG-02C is a battery powered, portable multimedia generator that enables you to
conduct quick, on-site verification test of your video systems. This product can output the
Audio and Video stored in internal HDD through each output port as Digital/ Analog signal.
ODSG-02C is the Multi-Media Test Device for display Inspection of various Projector, HDTV,
PDP, TFT-LCD etc. Especially, it supports both ATSC and DVBFormats of the COMPONENT,
Analog and high resolution HDMI, DVI up to 1080i/p and WUXGA.
3.2 The Features
zBattery powered for portability. Device is powered via internal batteries or
external AC/DC adapter.
zHandheld compact size 220 x 110 x 55mm(W/D/H) and easy operation.
zOffers analog and digital video signals including VESA, SMPTE and CEA
international standards.
zVerify HDCP on sources and displays.
zReads EDID data of connected display and scale a source to fit the
display.
zSupport the DVI (Single) & HDMI format (Ver 1.2) with DVI connector
zSupports all VESA resolutions up to WUXGA (1920x1200)/RB
zProvides various test patterns used by field technicians and engineer.
zProvides easy GUI on LCD panel for Resolution change, EDID, HDCP
and Audio.
zOffers media player function to play movie, music and image.
zIncludes 80GB HDD to store and play AV files.
zIncludes 3.6V/2A x3cell battery for field usage, It lasts for 2 hours but it
depends on operational condition.
zProvides video range function. (Full range for DVI and limited range for
HDMI)
zProvides RS-232 port for remote control.
zEasy firmware updates by USB.
6
3.3 The Specification
zTV/ S-VHS : NTSC, PAL
zDTV (Y/Pb/Pr) : 480i/p, 576i/p, 720p, 1080i/p
zDVI format : VESA standard up to 1920 x 1200(RB)
zHDMI format : Ver 1.2 (480i/p, 576p, 720p, 1080i/p)
zAnalog(15pin ) : 8MHZ-250MHZ(±25ppm)
H: 10KHZ ~ 200KHZ(±25ppm)
V: 10KHZ ~ 200HZ(±25ppm)
Audio: Stereo
zInternal storage : 2.5' HDD (80GB)
zVideo Format: MPG(MPEG1/2/4), AVI(MPEG1/2/4-V3, DivX3/4/5, XVID, VC-1,
DX50), WMV(WMV9), ASF, TS(MPEG Layer), TS(MPEG Layer),
TRP(MPEGLayer): Upto1920x1080P/50,60HZ
zAudio Format: MP3, WMA, AAC, PCM, AC3, WAV, BSAC, WMAPRO
zImage Format: JPEG, BMP, PNG, GIF, BMP, PNG
zImage Resolution: Up to 2048 x 2048
zHDCP Function: Receivable (Ver.1.1)
zDimension(mm) / Weight(KGs): 220 x 110 x 55mm (WDH) / 1kgs
zIP CODE: IPXO
3.4 Power Considerations
The ODSG-02C is a portable battery powered test instrument. It can be used for about 2 hours
without AC/DC power supplier. We recommend you set the screen brightness to the minimum level
to extend the operation time. Turn the unit off if you do not use it for a long time.
.
Battery status LED
Red: low battery, need to be charged.
Yellow: charging
Green: charged
※
If there is any trouble with the battery, please contact your Distributor or Reseller.
7
4. Environmental and Reliability Specifications
1. Operating Conditions
•Temperature : 10°C ~ 40°C
•Humidity : 10% - 80%, non-condensing
•Altitude : maximum 3,000m
2. Storage Conditions
•Temperature : -20°C - 45°C
•Humidity : 5% - 95%, non-condensing
•Altitude : maximum 3,000m
5. Each Part's Name and Function
5.1 Front View
①LCD : Shows various information like resolution and timing
②SETUP : Setup menu
③EDID : EDID on/off
※If the display does not have EDID or has abnormal one, the signal is not transmitted
when EDID on.
8
④DTV : Changes the output as DTV.(Component)
⑤HDMI : Changes the output as HDMI.
⑥ESC : Exits or Cancels the current menu.
⑦HDCP : Key for HDCP on/ off.(High-Bandwidth Digital Content Protection)
⑧AUDIO : Turns on or turns off the audio output.
⑨TV : Changes the output as TV.(NTSC, PAL)
⑩DVI : Changes the output as DVI.
⑪: Moves up or move down the files listed on.
⑫ENTER : Executes the operation.
⑬BATTERY LED: Shows the battery condition.
5.2 Side View
① Power ‘On/Off’ switch.
② DC 12V/5A Power receptacle.
③ USB B port. (Up-load or Download the firmware and Media files)
④ Analog output port. (15pin D-sub)
⑤ DVI port (DVI/HDMI format)
⑥
Audio output port. (Stereo)
⑦
TV format output port. (CVBS / S-Video).
⑧
D-TV format output port. (Component, YPbPr)
⑨
RS-232C port. (Remote control).
①
②③④
⑤⑥⑦⑧⑦
⑨
9
6. Initial Setting Menu
6.1 Using Initial Setting Menu
Turn on the power and press the ‘setup’ key.
It makes you control EDID, HDCP and audio as well as video type, resolution and timing.
6.2 Initial LCD Window, After Power On
6.3 Initial Display Screen, After Power On
6.4 Initial Menu Setup Screen
Initial setting Direction
[Key directions] *Enter key: Select contents. *Up/Down key: Changing value.
Output Mode Selects the resolution and timing
Range Setup Level Sets the level of range (3 mode)
①AUTO: Automatic range set up per output mode.
②Full range: 0 - 255 for DVI format
③Limit range: 16 - 235 for HDMI format
HDCP Set the HDCP (On/Off)
EDID Set the EDID (On/Off)
Ratio Select ratio (16:9 or 4:3)
Real Image Real image size
①On: Shows real size
②Off: Shows the resolution size
Slide show Automatic test pattern scroll (On/Off)
Slide Time Sets the interval of slide show
Output information (Video mode and format)
EDID On/Off, AUDIO On/Off
HDCP On/Off, Screen Ratio
Image Slide On/Off, Firmware version
*Shows the information of video mode and format
*Folder in HDD
10
7. How to play each function
7.1 How to Play The Images
3) Select the one of Image files, and then press ENTER key to show the Image on the display.
4) Press ESC key to go to previous menu.
1) Press Enter key to select the [+] hd1.
2) Press Enter key again to select [+] images folder.
Press ▲key to show the previous image listed in the image
folder.
(If the shown image file is the first pattern file in the image
folder, it makes you go to previous menu.)
Press ▼key to show the next image listed in the image
folder.
(If the shown image file is the last pattern file in the image
folder, it makes you go to previous menu.)
If you run slide show, the display will show PAUSE message. By
pressing Enter key once, you can pause the slide show and
pressing it once again, you can restart the slide show.
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere VPI Prüfgeräte Handbücher
Beliebte Prüfgeräte Handbücher anderer Marken
SMART
SMART KANAAD SBT XTREME 3G Series Bedienungsanleitung
Agilent Technologies
Agilent Technologies BERT Serial Bedienungsanleitung
Agilent Technologies
Agilent Technologies N3280A Bedienungsanleitung
Vernier
Vernier Go Direct Voltage Bedienungsanleitung
Lifeloc
Lifeloc R.A.D.A.R. Bedienungsanleitung
Fluke
Fluke T5-600 Bedienungs- und Montageanleitung
PCB Piezotronics
PCB Piezotronics 8159-0112A Bedienungsanleitung
BW Technologies
BW Technologies MicroDock II Bedienungsanleitung
Sun Nuclear
Sun Nuclear 1027 Bedienungsanleitung
Biomark
Biomark HPR LITE READER Bedienungsanleitung
Hioki
Hioki 3169-20 Bedienungsanleitung
Ashcroft
Ashcroft ATE-100 Bedienungsanleitung