Vtron C-DX503 Bedienungsanleitung
User Manual
Visionpro® C Series Display Cube
V1.4
VTRON
http://www.vtron.com
E-Mail: info@vtron.com
All rights reserved
User Manual Visionpro®C Series Display Cube
--
i
This manual is the copyright property of VTRON. Without the prior written consent of
VTRON, no part of the text or graphics in this manual shall be copied or distributed to
any party in any manner.
This product may allow you to use third party software or upload/download works
belonging to a third party, including articles, images, video, or software, but VTRON
does not own or provide such works. Your use of the aforementioned works belonging to
a third party means that you agree to use such works without infringing or breaching the
rights of the third party, and VTRON does not assume any liability for your use thereof.
VTRON and Visionpro® are the global registered trademarks of VTRON Company.
This manual is subject to change due to technical upgrades without prior notice.
Note: Images in this manual are for description and reference only. For actuality and
details, please refer to the product you received.
Note:
Texts and graphics in this manual are for providing an introduction to the
Visionpro® series display cubes offered by VTRON only. Product configurations
and functions will be in accordance with the purchase contracts signed by the
customer. The functions and display interface of the product you order might differ
from those in this manual. This is due to the difference in configuration between
the one you purchased and the one introduced in this manual.
Statement:
Products as introduced in this manual are Class B products that may cause
radio interference in domestic environment. Practical measures should be taken
when necessary.
User Manual Visionpro®C Series Display Cube
--
ii
Before operating Visionpro®series display cubes, please read and observe the
following safety precautions thoroughly.
Ensure proper grounding(grounded as indicated in
the figure)
The product should be grounded properly. Otherwise, a
series of problems will occur: serious system fault,
system instability and unreliability, and even the
paralysis to the whole system. Even worse, the safety of
users cannot be ensured.
Do not change the original design
Any addition to or deletion from any mechanical part
or electrical circuit in this product is prohibited.
VTRON will not assume any liability resulting
therefrom.
Do not install unauthorized software
The Visionpro®series display cube is a dedicated
device and must not be used for any other purpose.
Consult VTRON or a designated agent for the
installation of your own software. VTRON will not
assume any liability resulting therefrom.
Grounding (connected to earth)
●
Safety Precautions
!
User Manual Visionpro®C Series Display Cube
--
iii
Be sure to disconnect the power supply before
the following operations:
A. Removal or reinstallation of any part of the
product.
B. Disconnection or reconnection of any electrical
connector or other connector in this product.
Keep the display cube away from corrosive
chemical gas or agent
Corrosive chemical gases or agents will damage the
mechanical parts and electrical circuits of the product
and directly affect its lifetime. Avoid cleaning the
exterior or interior of the product with a highly
volatile solvent, such as gasoline, paint thinner,
acetone, etc.
Keep the display cube away from flammable
and explosive materials
Product safety and personal safety cannot be ensured
in an environment with flammable and explosive
materials.
Keep the display cube away from equipment
with strong electromagnetic interference.
User Manual Visionpro®C Series Display Cube
--
iv
Dangerous voltage inside.
May cause electric shock, burns, or death.
No user serviceable parts inside.
Only the dust screens and fuses are user serviceable. The
maintenance personnel must be properly trained;
otherwise, electric shock, UV radiation burns, contact
burns, serious injury, or irreparable damage to the
Visionpro®series display cube may be caused, and your
warranty will be invalidated.
Only the dust screens and fuses are user serviceable
The power must be disconnected before conducting such
operations. All the maintenance tasks must be carried out
by properly trained personnel.
The projection unit uses a professional-grade
ultra-bright LED light source. Do not replace the
LED with another LED light source, or the system
may be damaged.
Do not shut down the cooling fan of the Visionpro®
series display cube or block the surrounding air
circulation.
User Manual Visionpro®C Series Display Cube
--
v
Dust in the air and hot air may cause the hardware of the
Visionpro®series display cube to short-circuit. Do not
operate the cube in a dusty or high-temperature
environment.
A10 cm clearance must be maintained at the top of
the vertical top layer of the Visionpro®series display
cube for the air circulation of the fan.
Some screens are sensitive, and fingerprints on the screen
will affect their optical performance. So the Visionpro®
series display cube must be protected against any
touching or scratching.
Disconnecting device of grid power
This equipment uses a coupler or power connector as the
disconnecting device. Make sure that the connector or
coupler is easily accessible so that you can disconnect the
grid power in an emergency.
User Manual Visionpro®C Series Display Cube
--
vi
Content
1 DISPLAY CUBE OVERVIEW................................................................................................................. 1
1.1 MAIN FEATURES..................................................................................................................................... 3
1.2 APPEARANCE OF CSERIES DISPLAY CUBE............................................................................................. 4
1.3 MAIN COMPONENTS OF CSERIES DISPLAY CUBE .................................................................................. 6
1.4 TECHNICAL SPECIFICATIONS OF CSERIES DISPLAY CUBE ..................................................................... 7
1.5 DIMENSIONS OF CSERIES DISPLAY CUBE .............................................................................................. 8
2 PROJECTOR OF C SERIES DISPLAY CUBE ................................................................................... 10
2.1 ENGINE OVERVIEW .............................................................................................................................. 10
2.2 INTERFACE BOX OVERVIEW................................................................................................................. 12
2.2.1 Appearance of the Interface Box.................................................................................................. 12
2.2.2 Boards of VCL-3/VCL-3+ /VCL-3A Interface Box..................................................................... 15
3NETWORK ENVIRONMENT FOR THE VIDEO WALL SYSTEM................................................. 37
4 INSTALLATION OF C SERIES DISPLAY CUBE ............................................................................. 38
4.1 VTRON DLPTM DIGITAL VIDEO WALL SYSTEM ................................................................................. 38
4.2 SYSTEM CONFIGURATION..................................................................................................................... 40
4.3 GROUNDING OF THE VIDEO WALL SYSTEM.......................................................................................... 41
5 SYSTEM ON/OFF ................................................................................................................................... 42
6 PRECAUTIONS....................................................................................................................................... 43
7 DAILY MAINTENANCE........................................................................................................................ 44
8 TROUBLE SHOOTING.......................................................................................................................... 45
9 CONTACT US.......................................................................................................................................... 46
User Manual Visionpro®C Series Display Cube
--
1
1 Display Cube Overview
C series display cube, launched by VTRON, is coming to the rescue in a video-wall-
needed age! Redundant solid-state LED light source of 1500 ANSI lumens, full-cycle
color & full- cycle brightness maintenance free as well as dual power module and other
cutting-edge technologies help C series display cube to build an excellent wall. It is not
the only but an ideal choice for all monitoring centers, command centers, and data
management centers.
Visionpro®C series display cube has the following standard models, and you can have
the product customized according to your actual needs.
XGA Display Cube
C-DX503
C-DX803
CF-DX675
C-DX507
C-DX603
C-DX505
C-DX805
C-DX607
CF-DX603
C-DX605
C-DX505D
C-DX677
C-DX673
CF-DX605
C-DX605D
C-DX807
CF-DX673
C-DX675
C-DX675D
SXGA+ Display Cube
C-SX503
CF-SX673
CF-SX605
C-SX505D
C-SX507
C-SX603
C-SX803
C-SX675
C-SX605D
C-SX607
CF-SX603
C-SX505
CF-SX675
C-SX675D
C-SX677
C-SX673
C-SX605
C-SX805
C-SX805D
C-SX807
1080PDisplay Cube
C-PH603
CF-PH703
C-PH705
C-PH605D
C-PH607
C-PH703
C-PH605
CF-PH705
C-PH705D
C-PH707
User Manual Visionpro®C Series Display Cube
--
2
Note:
C indicates the display cube uses C-type frame with rear access;
CF indicates the display cube uses C-type frame with front access.
DX indicates the display cube is in XGA resolution;
SX indicates the display cube is in SXGA+ resolution;
PH indicates the display cube is in 1080P resolution.
The values of 50, 60, 67, 70, and 80 indicate the screen diagonal of the
display cube.
Value 3 indicates a 2nd generation LED light source is used;
Value 5 indicates a 3rd generation LED light source is used;
Value 7 indicates a 4th generation LED light source is used.
D indicates the display cube (3D display cube) supports 3D signal input
and display.
User Manual Visionpro®C Series Display Cube
--
3
1.1 Main Features
Ultra-long Lifetime & Environmentally friendly
The change of light source is virtually unnecessary due to LED’s long life time.
It is environmentally friendly due to the absence of mercury, sodium, and other
harmful substance.
Full-cycle (Color & Brightness) Maintenance Free Technology
Intelligent system self-diagnosis function brings automatic & immediate service
recovery.
High-quality Image Display Technology
A LED light source of high ANSI lumens presents crisp, color-accurate, clear and
vivid images. The image shows high uniformity, giving you delightful visual
enjoyment.
Strong Signal Acquisition& Signal Processing Capacity
Signal acquisition (optional):
DVI, VGA, CVBS, YPbPr, HDMI, 3G-SDI, DP signal input etc. are supported.
Signal processing (optional):
The C series display cube has strong signal processing capacity with its
hot-swappable signal processing boards.
Multiple Intelligent Protection for System Safety
1＋1 redundant hot-swappable power supply, hot-swappable signal processing boards
and modular design provide and maintain a healthy environment for the system
running.
Dieses Handbuch passt für folgende Modelle
48
Inhaltsverzeichnis
