Vutec Elegante fixed Bedienungsanleitung
VUTEC CORPORATION
11711W. Sample Road
Coral Springs, FL 33065
TEL: (954) 545 9000-FAX: (954) 545 9011
E- info@MAIL: vutec.com
INSTALLATION INSTRUCTIONS
Elegante Fixed Frame Wall Screen
Frame Assembly
Place the screen frames on a flat and cleaned surface with the backside face up.
Referring to Figure 3, a pair of blank and tapped corner brackets is used to form the screen frame. Insert the brackets
in the channel of the frame. Install four set screws to each of the tapped corner brackets. Tighten the set screws to
expand the brackets and to grip the frames. Be sure the assembled frame is square. Make adjustments as necessary.
Unless mounting to wall studs; suitable wall anchors (not supplied) must be used to provide adequate support for the
screen.
Figure 1
Screen Shown Without
Fabric
Figure 2
Side View
Mounting
Installation
Do not install the screen fabric to the frame yet!
Determine a location on the wall for the screen.
Referring to Figures 1 and 2, install the two wall mount brackets onto the wall. Be sure they are level then tighten the
screws. Add a third bracket in the middle for screen width of 96 inches and larger.
Hang the screen frame. Locate and install a wall mount bracket to the bottom screen frame.
Note: The middle top and bottom brackets prevent large size frame from bowing like ‘Hour Glass’.
VUTEC CORPORATION
11711W. Sample Road
Coral Springs, FL 33065
TEL: (954) 545 9000 - FAX: (954) 545 9011
E- info@MAIL: vutec.com
The screen frame is now trapped between the upper and lower wall brackets. Push down in the middle of the bottom
screen frame to release it from the lower wall bracket. The screen frame is ready to be lifted and removed from the
wall.
Place the screen frame on a flat and cleaned surface with the backside face up.
Attach the screen fabric to the frame. The fabric must be stretched to meet the Velcro strips on the frame.
Check the screen from the viewing side. Be sure the screen surface appears smooth and free of wrinkles. Reapply
the screen fabric as necessary.
Hang the screen using only the upper wall brackets. Adjust the screen’s side to side location. Push down in the
middle of the bottom screen frame to hook it to the lower wall bracket.
Hint: The screen fabric will stretch to allow the bottom frame to be pushed down.
Accessories Included
Description QTY.
4
12
4
4
16
Wall Mount Bracket
#8 x 11/2 long, Truss Head Phillip
Screw Blank Corner Bracket
Tapped Corner Bracket
1/4-20 x 1/4 long, Hex Socket Set
Screw 5/32 Hex Key 1
Figure 3
Corner Brackets
Assembly
9/25/2015 V1.0
Inhaltsverzeichnis
Andere Vutec Projektionsfläche Handbücher
Vutec
Vutec SILVERSTAR PANOFLEXX Bedienungsanleitung
Vutec
Vutec Vision XTC2 Bedienungsanleitung
Vutec
Vutec ArtScreen Bedienungsanleitung
Vutec
Vutec Elegante Bedienungsanleitung
Vutec
Vutec Lectric I Bedienungsanleitung
Vutec
Vutec HOME THEATER Series Bedienungsanleitung
Vutec
Vutec LARGE SCREEN Series Bedienungsanleitung
Beliebte Projektionsfläche Handbücher anderer Marken
FART PRODUKT
FART PRODUKT Standard SCREEN Bedienungsanleitung
Draper
Draper E Series Handbuch
Elite Screens
Elite Screens Elite Tripod Series Bedienungsanleitung
Laarhoven
Laarhoven Companion II Bedienungsanleitung
Renogy
Renogy RMS-LFPS-US Bedienungsanleitung
Da-Lite
Da-Lite ExecutiveElectrol Bedienungsanleitung
