Vxl Itona C Series Bedienungsanleitung

Itona C Series

Service Manual

Information in this document is subject to change without notice and does not represent a

commitment on the part of the manufacturer. No part of this guide may be reproduced or

transmitted in any form or means, electronic or mechanical, including photocopying and recording,

for any purpose, without the express written permission of the manufacturer.

Every effort has been made to make this guide as complete and as accurate as possible, but no

warranty or fitness is implied. The authors and the publisher shall have neither responsibility nor

liability to any person or entity with respect to loss or damages arising from the use of information

contained in this guide. This disclaimer does not apply in countries where such provisions are

inconsistent with local law.

All Trademarks are acknowledged.

Last Updated: September, 2012

Version: ICS/SM-36-12

VXL Instruments Ltd,

House of Excellence,

No. 17, Electronics City,

Hosur Road,

Bangalore–560 100, INDIA

www.vxl.net

Table of Contents

1Tools Required.......................................................................................................................................1

2Pedestal and Side Cover ........................................................................................................................3

Removing the Pedestal and Side Cover..................................................................................................3

Fixing the Pedestal and Side Cover........................................................................................................4

3Replacing RAM.......................................................................................................................................5

4Replacing Flash......................................................................................................................................7

5Replacing the Motherboard.....................................................................................................................8

6Removing the Power Supply Unit..........................................................................................................11

Warning and Caution Statements

Warning: It is best to wear an electrostatic discharge (ESD) cuff when handling electronic

components (Motherboard, RAM and Power Supply).

Warning: Please ensure that the power supply is switched off before unplugging the power supply

connector from the motherboard.

Caution: Memory modules have a foolproof insertion design. A memory module can be installed in

only one direction. If you are unable to insert the module, please reverse the direction

Tools Required 1

1 Tools Required

The tools required for servicing the Itona C Series Thin Client are shown in Figure 1.

Figure 1: Tools Required

A. ALLEN Hex HEAD 2.0mm

Screwdrivers

A. HEX Screwdriver E. Hot Glue Gun with rod

B. Star Screwdriver F. Isopropyl Alcohol ((CH3)2CHOH)

C. Nut Driver

D. Nose pliers

2 Tools Required

B. Phillips screwdriver

C. Hex Nut driver 5.0 mm

D. Nose pliers with spring

Pedestal and Side Cover 3

2 Pedestal and Side Cover

Removing the Pedestal and Side Cover

The procedure to remove the power adapter, pedestal and top cover of the client is explained in this section.

To remove the pedestal and top cover:

1. Turn Off the power to the client.

2. Unplug and remove the power adapter from its connector at the back of the client.

3. Unlock and remove the pedestal as shown in Figure 2.

Figure 2: Itona C Series

4. Using the star screwdriver ( Item B in Figure 1) unscrew the 2 screws shown in Figure 3.

Figure 3: Side Cover Screws

Note: Retain the screws for future use.

4 Pedestal and Side Cover

5. Slide the side cover and remove it as shown in Figure 4.

Figure 4: Side Cover

Fixing the Pedestal and Side Cover

To fix the side cover, pedestal and power adapter:

1. Gently press the side cover downwards and slide it inwards.

2. Using the star screwdriver ( Item B in Figure 1) tighten the two screws holding the side cover.

3. Fix the pedestal and lock it.

4. Switch on the power to the client.

Replacing RAM 5

3 Replacing RAM

To replace RAM:

1. Remove the power adapter, pedestal and side cover . For more information see, section

‘Removing the Pedestal and Side Cover’ on page 3.

2. Apply isopropyl alcohol on the glue holding the RAM, pull the glue out using the nose pliers.

Figure 5: Remove Glue on the RAM Holder

3. Unlock the clip on either side of the RAM, by pushing it side ways simultaneously.

Figure 6: RAM Socket Clips

4. Remove the existing RAM from the socket by pulling it outward.

5. Insert the new RAM in the socket.

Note: Ensure that the new RAM is of the same dimensions as the existing RAM.

6 Replacing RAM

6. Press the RAM downwards until the clip at each end of the socket lock into position.

Note: You will hear a distinctive click, indicating the module is correctly locked into position.

7. Fix the top cover, pedestal and power adapter. For more information see, section ‘Fixing the

Pedestal and Side Cover’ on page 4.

Inhaltsverzeichnis

Andere Vxl Server Handbücher

Vxl

Vxl Itona D35S Bedienungsanleitung

Vxl

Vxl Itona TC4341 Bedienungsanleitung

Vxl

Vxl Itona C35 Bedienungsanleitung

Vxl

Vxl Itona E24S Bedienungsanleitung

Vxl

Vxl Itona TC23yy Bedienungsanleitung

Vxl

Vxl Itona TC1430 Bedienungsanleitung

Vxl

Vxl Itona TC73yy Installationshandbuch

Vxl

Vxl TC15yy Installationshandbuch

Vxl

Vxl Itona Cxx series Installationshandbuch

Vxl

Vxl Itona C21 Bedienungsanleitung

Vxl

Vxl Itona D21S Bedienungsanleitung

Vxl

Vxl Winlinx Pro Installationshandbuch

Vxl

Vxl Itona TC1527 Bedienungsanleitung

Vxl

Vxl Itona D23S Bedienungsanleitung

Vxl

Vxl Itona TC1536 Bedienungsanleitung

Vxl

Vxl Itona TC6335 Bedienungsanleitung

Vxl

Vxl Itona D51S Bedienungsanleitung

Vxl

Vxl Itona LQ+ Series Installationshandbuch

Vxl

Vxl Itona E21S Bedienungsanleitung

Vxl

Vxl TC15yy Bedienungsanleitung

Vxl

Vxl Itona IQL Series Montageanleitung

Vxl

Vxl Itona C32 Bedienungsanleitung

Vxl

Vxl Itona C42 Bedienungsanleitung

Vxl

Vxl Itona F Series Handbuch

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung