W Box Technologies 0E-HDMISP1X4 Bedienungsanleitung

Introduction

Congratulations and thank you for purchasing W Box

Technologies 0E-HDMISP1X4.

0E-HDMISP1X4 is a 1 to 4 splitter for HDMI with 4K@60Hz 4:4:4

8bit which reliably distributes one HDMI input to four HDMI

outputs. It also provides high-tech MIX EDID management and

HDCP management which authenticates HDCP encryption

between all devices, ensuring the HDMI source reliably outputs

correct content for display.

0E-HDMISP1X4 is ideal for applications, such as offices, schools,

conferences rooms, shopping malls, hotels or museums, which

require the distribution of an HDMI source signal to four outputs.

Please follow the instructions in this manual to assure proper

installation and to achieve the full performance and satisfaction

you would expect from W Box Technologies.

Features

•Slim appearance and space saving

•HDMI with 4K@60Hz 4:4:4 8bit and HDCP 2.2 compliant

•Distributes one HDMI source to four HDMI displays

•Supports signal transmission distance up to 33 feet (10

meters) at 4K@30Hz and 1080P, up to 10 feet (3 meters) at

4K@60Hz when used with standard HDMI cables.

•EDID rotary switch on panel for EDID management function.

•Reshapes marginal or noisy HDMI signals, ensuring a strong,

stable digital signal

Package Contents

Before you start the installation, please check the package

contents:

•1 x 0E-HDMISP1X4

•1 x Power Adapter (DC 12V 1A)

•1 x Phoenix male connector (3pin 3.5mm)

•2 x Mounting Brackets

•1 x User Manual

•1 x Datasheet

Panel

Front Panel



ID.

Name

Description

HDMI IN LED

Steady blue: When a source device is

powered on and connected to the splitter.

OFF: No source device is connected or it

is powered off.

HDMI OUT

LEDs

Steady blue: The HDMI displays is

powered on and connected to

corresponding output.

OFF: No HDMI display is connected or it

is powered off.

POWER LED

Steady blue: The splitter is powered on.

Rear Panel



ID.

Name

Description

DC 12V Port

Connects to DC 12 V 1 A power

adapter.

HDMI OUT1 Port

Connects to HDMI display using

HDMI cable.

HDMI OUT2 Port

Connects to HDMI display using

HDMI cable.

HDMI IN Port

Connects to an HDMI source using

HDMI cable.

HDMI OUT3 Port

Connects to HDMI display using

HDMI cable.

HDMI OUT4 Port

Connects to HDMI display using

HDMI cable.

EDID Rotary

Switch

For EDID management

RS232 port

For firmware upgrade

Installation

1. Connect an HDMI source device (such as a Blu-ray player) to

the splitter HDMI IN port. As show number 1 in figure.

2. Connect 4 HDMI displays (such as HD monitors) to the splitter

HDMI OUT ports. As show number 2,3,4,5 in figure.

3. Toggle the EDID rotary switch to the proper position. For more

information, please refer to EDID management section.

4. Connect the power adapter to DC 12V port. As show in figure

5. Connect all the devices to their power adapter, power them on

and start the operation.



EDID Management

EDID (Extended Display Identification Data) is a data structure

provided by a digital display to describe its capabilities to a video

source.

0E-HDMISP1X4 supports MIX EDID, Fixed EDID and copy EDID

functions, there is a EDID rotary switch on the panel, when

connect multiple monitors at the same time, the device will

contrast the EDID of all the displays and output the property timing

depend on toggle the switch.

Please refer to the following table to set EDID:

Position

Description

Function

MIX EDID: Video

compatibility and

Audio quality

Outputs the minimum video resolution and

the maximum audio channel.

MIX EDID: Video

compatibility and

Audio compatibility

Outputs the minimum video resolution and

the minimum audio channel.

MIX EDID: Video

quality and Audio

quality.

Outputs the maximum video resolution and

the maximum audio channel.

MIX EDID: Video

quality and Audio

compatibility

Outputs the maximum video resolution and

the minimum audio channel.

3840x2160@30Hz_2

D_2CH with HDR

Fix it as native.

3840x2160@30Hz_2

D_5.1CH with HDR

Fix it as native.

3840x2160@30Hz_2

D_7.1CH with HDR

Fix it as native.

Note: If EDID copy failed, output EDID: 1080P@60Hz with stereo

audio.

1920x1080@60Hz_3

D_2CH with HDR

Fix it as native.

1920x1080@60Hz_3

D_5.1CH with HDR

Fix it as native.

1920x1080@60Hz_3

D_7.1CH with HDR

Fix it as native.

Copy EDID from

output1

Reserved

Position

Description

Function

Troubleshooting

W Box Technologies products are designed to function trouble-

free. Most problems that occur are due to simple issues. If you

have trouble, please check the list of simple fixes below.

Six Steps of Regular Troubleshooting Routine.

1. Power: Make sure all devices are powered on. (source,

splitter, display devices)

2. Indicator: Make sure LED indicators of splitter are normal

according to user manual.

3. Devices: Make sure picture can be shown normally when

connecting source to display devices directly.

4. Cable: Plug in and out HDMI cable or change another HDMI

cable. For 4K@30Hz or 1080P, HDMI cable should be less

than 10m, for 4K@60Hz, HDMI cable should be less than 3m.

Standard HDMI 2.0 cable is needed.

5. EDID: Because of the rotary switch for MIX EDID function,

there are multiple video and audio output status, please do as

the EDID Management section mentioned to make the

monitors work properly.

6. Compatibility: Please test other source and display devices

to determine whether it is a compatibility issue.

Typical question

How to deal with video flash or cut off during the installation?

•Verify that all the indicators are solid on. If not, please check if

the power adapter or HDMI cables are well connected.

•Verify that the display devices work properly and that the

source device has normal signals output.

Specification

Technical

Input/Output Signal Type

HDMI with HDCP 2.2

Input/Output Resolution

Supported

SMPTE: !

1280x720P1,2,3,4,5,6,7,8, 1920x1080I6,8,

1920x1080P1,2,3,4,5,6,7,8,!

3840x21602,3,5,6,8, 4096x21602,3,5,6,8; !

VESA: !

800x6008, 1024x7688, 1280x7688,

1280x8008, 1280x9608, 1280x10248,

1360x7688, 1366x7688, 1400x10508,

1440x9008, 1600x9008, 1600x12008,

1680x10508, 1920x12008, !

1 = at 23.98 Hz, 2 = at 24 Hz, 3 = at

25 Hz, 4 = at 29.97 Hz, 5 = at 30 Hz,

6 = at 50 Hz, 7 = at 59.94 Hz, 8 = at

60 Hz;

Maximum Data Rate

18 Gpbs

Maximum Pixel Clock

600 MHz

General

Power Supply

DC 12 V 1 A

Power Consumption

4 W (Max.)

Operating Temperature

+32°F to +113°F (0°C to +45°C)

10% to 90%, non-condensing

Storage Temperature

-4°F to +158°F (-20°C to +70°C)

10% to 90%, non-condensing

ESD Protection

Human Body Model:

±8 kV (air-gap discharge)/

±4 kV (contact discharge)

Limited Warranty

1. Limited Warranty

a. General

Subject to the terms and conditions of this Limited Warranty, from

the date of sale through the period of time for product categories

specified in Section 1(b), ADI warrants its W Box Technologies

products to be free from defects in materials and workmanship

under normal use and service, normal wear and tear excepted.

Except as required by law, this Limited Warranty is only made to

Buyer and may not be transferred to any third party.

ADI shall have no obligation under this Limited Warranty or

otherwise if:

(i) The product is improperly installed, applied or maintained;

(ii) The product is installed outside of stated operating

parameters, altered, or improperly services or repaired;

(iii) Damage is caused by outside natural occurrences, such as

lightning, power surges, fire, floods, acts of nature, or the like.

(iv) Defects resulting from unauthorized modification, misuse,

vandalism, or other causes

(v) Unrelated to defective materials or workmanship, or failures

related to batteries of any type used in connection with the

products sold hereunder.

ADI only warrants those products branded as W Box Technologies

products and sold by ADI. Any other products branded by third

parties are warranted by the third party manufacturer for a period

as defined by the third party manufacturer, and ADI assigns to

Dimensions

6.6" x 2.75" x 0.71"

(167 mm x 69.7 mm x 18 mm)

Weight

0.66b/0.30kg

Certification

CE, FCC, RoHS

!10

Inhaltsverzeichnis

Andere W Box Technologies Kabel und Steckverbinder Handbücher

W Box Technologies

W Box Technologies 0E-HDMISPL8 Bedienungsanleitung

Beliebte Kabel und Steckverbinder Handbücher anderer Marken

Philips

Philips SWA6310 Bedienungsanleitung

StarTech.com

StarTech.com CRJ4550PK Bedienungsanleitung

Nohau

Nohau EMUL-IP2K-PC Bedienungsanleitung

Foxun

Foxun SX-SP144E-HD4K2K Bedienungsanleitung

Philips

Philips SWA3305W Bedienungsanleitung

opticis

opticis Stretch DVIM1-1P0x Bedienungsanleitung

Volkswagen

Volkswagen VAS 6558A Bedienungsanleitung

NEXIBO

NEXIBO N-13 Bedienungsanleitung

CYP

CYP PU-1H3HBTL Bedienungsanleitung

Allen-Bradley

Allen-Bradley 1784-u2dhp Bedienungsanleitung

Global Caché

Global Caché Flex Link Blaster Bedienungsanleitung

Hauppauge

Hauppauge USB-Live2 Bedienungsanleitung

Fenix

Fenix MPSV 15 Bedienungsanleitung

BEGA

BEGA 71 085 Bedienungsanleitung

Tesla

Tesla HPWC Bedienungsanleitung

GAMERON

GAMERON LUXURY TV CABLE Bedienungsanleitung

molex

molex Milli-Grid Dual row 87568 Series Bedienungsanleitung

Burndy

Burndy Continental Industries thermOweld CRE-7 Bedienungsanleitung