W Box Technologies 0E-TELBSET Bedienungsanleitung
Telephone Test Set
www.wboxtech.com
0E-TELBSET
User Manual
• Multi-lingual (English, French, Spanish)
• Rugged water and rainproof housing
• Angled Bed-of-nails and Piercing clip
cord set
• Large backlit LCD
• Glow in the dark keypad
• On-hook voltage and off-hook current
readings
• Caller ID/Call Waiting Caller ID and error
detection
• Last number called or received list
• Amplied line monitoring
• Soft key menu system
• Data Defender™keeps digital lines safe
• Detects and identies DSL and T1 lines
• DTMF Digit Capturing
• Displays Ring Frequency & Ring Voltage
2
User Manual
Table of Contents
About this Manual.....................................................................................3
Introduction..........................................................................................3
Symbols and Icons ...............................................................................3
Terms and Descriptions ........................................................................4
Safety Information ................................................................................5
Design Features........................................................................................6
0E-TELBSET Description .........................................................................7
Angled Bed of Nails with piercing cord set .............................................8
LCD Display Screen ..............................................................................8
Talk Mode ............................................................................................9
Memory Storage.................................................................................10
Detection Warnings.............................................................................11
Keypad ..............................................................................................12
Operations..............................................................................................14
Turning the Unit On/Off .......................................................................14
Automatic Power Down.......................................................................14
POTS General Guidelines ....................................................................15
Operation Notes .................................................................................15
Talk/Bell/Monitor ................................................................................15
Talk Setting (Talk Mode) ......................................................................16
Off-Hook Protection (Data Defender™)...........................................16
Call Waiting/Caller ID....................................................................17
Speed Dial...................................................................................17
Flash...........................................................................................17
Mute Button ...........................................................................................18
Bell Setting (Bell Mode) ...........................................................................18
Monitor Setting (Monitor Mode) ...............................................................19
Setup Menu............................................................................................20
Memory Dial.......................................................................................20
Recent Call List ..................................................................................22
Language...........................................................................................22
Number Format..................................................................................22
Ring Volume.......................................................................................22
Display Contrast .................................................................................22
Backlight level ....................................................................................22
Auto Power Off...................................................................................22
Maintenance ..........................................................................................23
Battery Replacement ..........................................................................23
Cleaning ............................................................................................23
Storage..............................................................................................24
Warranty Information ..........................................................................25
Disposal.............................................................................................25
Specifications .........................................................................................26
3
Symbol Definition
Warning: Potential for personal injury
Caution: Potential for damage to or destruction of equipment
Conformité Européenne: Conforms with European Economic
Area directives
Disposal information: Do not place equipment and/or its
accessories in the trash. Items must be properly disposed of
in accordance with local regulations.
ABOUT THIS MANUAL
The 0E-TELBSET is a self-contained, battery-powered, telephone test set for
use by installers and repair technicians. Its state of the art design makes it
rugged and water resistant. The 0E-TELBSET is ideal for temporary
communication and servicing and installing telephone and data lines. It
comes with a protective silicon boot as well as a deluxe cord set made from
nylon cloth covered test lead wire. Also available is an optional carrying case
that holds the test set.
Symbols & Icons
The following symbols are used throughout the manual or in the display
screen of the 0E-TELBSET to help you avoid personal injury and
potential damage to the test equipment (Table 1).
Table 1. SymbolsandIcons
4
Terms Description and Uses
Talk Mode In this mode, the 0E-TELBSET goes “off hook” and
produces a dial tone when connected to a POTS line. While
off-hook the 0E-TELBSET can dial phone numbers from its
keypad or via internal memory slots.
Bell Mode This is the “on hook” or “off” mode. In this mode, caller ID and
the Ringer are activated when a call is being received.
Monitor Mode Monitor mode allows listening to a line without loading it.
It displays line voltage, on-hook Caller ID and any detected
DTMF digits on the line.
POTS line “Plain Old Telephone Service” the basic form of wired
residential and small business service connection.
Hook flash Rapid depression and release of the switch hook which is
used for placing a call on hold, notifying an operator of the
completion of a call, or signaling a PBX.
DTMF Dual Tone Multi-Frequency is the signaling between the sub-
scriber and switching equipment from push button telephones.
Tone Tone dialing mode uses the DTMF method to signal the
switching equipment for each numbered button press.
Pulse Pulse dialing mode signals the central office or switch by
opening and closing the telephone loop a specific amount of
times depending on the number dialed.
CID and
CWCID Caller ID is 1200 BAUD modem data sent between the first
and second ring with information about the incoming call for
display on a phone that recognizes CID. Call Waiting Caller
ID is the same information sent to the phone while a call is in
progress preceded by a call waiting tone.
Tip and Ring Tip and Ring are the historical names for the two leads of a
POTS line. Tip is the black lead and Ring the red lead of the
cord set. Contrary to modern standards, the black lead is a
positive voltage with respect to the red lead.
Table 2.TermsandDescriptions
Terms and Descriptions
Table 2 defines the terms used throughout the manual and provides
information to assist you with proper operation and understanding of the
unit and its functions.
5
Notification Definition
xxV TOO HIGH,
DISCONNECT NOW! High Voltage detection appears when the voltage
on the cable is unsafe and exceeds 65 volts peak
AC or DC.
Safety Information
To ensure safe operation of the 0E-TELBSET, follow the instructions
carefully and observe the warning and caution messages listed in Table 3.
Failure to observe warnings can result in damage to the unit.
Table 3.SafetyInformation
6
DESIGN FEATURES
• Largest Backlit LCD display on the market
• Ergonomically designed body for comfortable use
• Rainproof and highly water/dust resistant case to IP54 standard
• Drop tested up to 20 ft
• 60 inch Angled Bed of Nails with piercing pin cord set
• Glow in the Dark keypad
• Metal spring loaded belt clip
• Loud speaker with fine volume adjustment
• Adjustable earpiece volume, hearing aid compatible
• Microphone mute with toggle on/off locking feature
• Soft key menu system simplifies user interface and customization
• Contact list of up to 8 names and phone numbers
• Supports three languages: English, Spanish and French
• Measures and displays ring frequency and voltage
• Supports both CID and CWCID
• Cushion boot for extra protection in ultra-harsh environments
• Data Defender™detects lines with data – DSL, T1, etc. (Data Defender is
a trademark of Independent Technologies)
• High line voltage protection with override options
• Active monitor circuitry minimizes load on subscriber line
• DigitView™, DTMF digit detection and display in Monitor mode, diagnose
premise equipment
• PwrSave™circuitry for Extra Long battery life
7
0E-TELBSET DESCRIPTION
The Telephone Test Set is illustrated in Figure 1.
Figure 1.
Metal
Spring-Loaded
Belt Clip
Mute Button
Graphical
LCD Screen
Microphone
Keypad
Receiver
TELEPHONE TEST SET
0E-TELBSET
Loud
Speaker
Battery
Door
Talk, Bell,
Monitor Buttons
8
Figure 3.LCDDisplayScreen
Figure 2.(A)AngledBed-of-NailswithPiercingClipand(B)No-FaultCord
Setwithdustcap
A
B
A
LCD Display Screen Descriptions
The 0E-TELBSET has a transflective graphical LCD display screen,
shown in Figure 3 below. The LCD display screen shows the following:
modes and related icons, memory and battery life indicator.
Angled Bed of Nails with Piercing Clip Cord Set
One angled bed of nails with piercing pin cord set is located at the bottom
of the 0E-TELBSET. The connectors enable you to securely connect with
individual telephone cable connectors.
9
Talk Mode
When the Talk button is pressed, the 0E-TELBSET goes off hook and
displays the line condition on the LCD display screen. The following
information is displayed on the screen when 0E-TELBSET goes off hook:
• mA – The loop current measured on the line, normal polarity
and reverse polarity.
• Telephone Icon – Indicates that the 0E-TELBSET is operating in
Talk Mode.
• Tone/Pulse Icon – Displays whether the 0E-TELBSET is in DTMF
tone or pulse dial mode.
• Speaker Icon – Appears when the loudspeaker is active.
• Microphone Icon – Indicates if the microphone is muted or
unmuted .
• Battery Icon – Displays remaining battery life. A new set of batteries has
four bars .
• Recall Soft Key – Press F1 to go to the Speed Dial screen.
• Tone Soft Key – Press F2 to toggle between tone and pulse dialing.
• Options Soft Key – Press F3 to activate a popup menu for dialing A-D
and Pause.
10
Battery Life Indicator ( )
The battery life icon appears in the upper right corner of the LCD display
screen to demonstrate the approximate remaining battery life. A new set of
batteries shows four bars. The number of bars decreases as the battery is
nearing depletion. At about 4.2 volts the battery icon has no bars. At about
3.5 volts the screen starts to fade. Results may be unreliable at this point.
Note: The 0E
TELBSET
will turn off if the power supply goes
out of regulation from a low battery condition.
Table 4.MemoryStorage
Values Description
1 2 3 4 5 6 7 8 The unit has eight memory storage locations. The
slot number is reverse video if in use.
Memory Dial Each memory slot has the option to view or enter a
name and number.
Memory Name Up to 16 characters can be entered to identify the
number stored in that location.
Memory Number Up to 32 digits can be saved in each of the 8
memory locations.
Memory Storage
While in the Setup menu, numbers 1-8 will be displayed representing the
8 name and number memory locations. By selecting a memory location
number you will be able to edit or erase an entry. See Table 5 for a
description of the display screen updates when Memory Storage is in use.
Note: Refer to the Using Memory Storage section on page 17 to
learn how to store multiple number values for testing purposes.
Inhaltsverzeichnis
Andere W Box Technologies Prüfgeräte Handbücher
Beliebte Prüfgeräte Handbücher anderer Marken
SMART
SMART KANAAD SBT XTREME 3G Series Bedienungsanleitung
Agilent Technologies
Agilent Technologies BERT Serial Bedienungsanleitung
Agilent Technologies
Agilent Technologies N3280A Bedienungsanleitung
Vernier
Vernier Go Direct Voltage Bedienungsanleitung
Lifeloc
Lifeloc R.A.D.A.R. Bedienungsanleitung
Fluke
Fluke T5-600 Bedienungs- und Montageanleitung
PCB Piezotronics
PCB Piezotronics 8159-0112A Bedienungsanleitung
BW Technologies
BW Technologies MicroDock II Bedienungsanleitung
Sun Nuclear
Sun Nuclear 1027 Bedienungsanleitung
Biomark
Biomark HPR LITE READER Bedienungsanleitung
Hioki
Hioki 3169-20 Bedienungsanleitung
Ashcroft
Ashcroft ATE-100 Bedienungsanleitung