Wacom Cintiq 21UX Bedienungsanleitung

NDEX

ONTENTS

NDEX

ONTENTS

Software User’s Manual

CONTENTS

About the manual 2

Navigating the manual 2

CUSTOMIZING 3

Opening the control panel 3

Control panel overview 4

Control panel settings 5

Calibrating the interactive pen display 6

Adjusting frequency and tracking (VGA only) 7

Customizing the pen 8

Optional pens 8

Adjusting tip feel and double-click 9

Adjusting eraser feel 10

Advanced tip and eraser pressure settings 11

Customizing tool buttons 12

Button functions 13

Customizing tilt sensitivity 16

Using Cintiq with other monitors 16

Customizing the tablet functions 17

Customizing ExpressKeys 18

Customizing tablet Touch Strips 19

Advanced Touch Strip settings 22

Customizing the Pop-up Menu 23

Working with multiple tools 24

Working with application-speciﬁc settings 25

Creating an application-speciﬁc setting 26

Changing settings for a speciﬁc tool

and application 27

Removing application-speciﬁc settings 27

Changing the tablet mode 28

Installing multiple tablets 28

GLOSSARY29

INDEX31

NDEX

ONTENTS

NDEX

ONTENTS

About the manual

This interactive document provides quick access to information about the Cintiq interactive pen display.

Just click on a navigation button or highlighted word to move through the document. The information is

common to both Windows and Macintosh platforms, and Windows screen captures are shown unless

otherwise noted.

Note:

This manual does not contain information for installing Cintiq. Please refer to your product installation

guide for details on installing Cintiq.

If you are new to electronic documentation, be sure to read navigating the manual.

Here are some other points to keep in mind:

•S

MALL

CAPITAL

LETTERS

are used to identify the names of keyboard keys, dialog boxes, and control panel

options.

• Remember that when viewing this document you can always use the zoom-in tool to increase the size of

the page on your display screen.

• The following kinds of information are not included with this product: information about your speciﬁc

computer hardware or operating system, or information about your application software. Your best

source for this information is the set of manuals and disks that came with your hardware, operating

system, or application.

• Many graphics applications have built-in support for Cintiq features (such as pressure-sensitivity, tilt,

rotation, Tool ID, and airbrush simulation). You can ﬁnd a listing of applications that support these

features at Wacom’s web site. For information on how best to use Cintiq features within a speciﬁc

application, refer to the instructions in that application’s manuals.

Navigating the manual

Use the navigation controls to move through the manual:

Go to front page.

Go to table of contents.

Go to index.

Go back to previous view.

Page back, or page forward.

Go to beginning of section.

Go to topic.

Topic continued.

Adobe Reader provides you with additional tools for using and printing the manual. Refer to the Adobe

Reader help for more information.

CONTENTS

INDEX

HEADING TEXT

topic

NDEX

ONTENTS

NDEX

ONTENTS

CUSTOMIZING

After you master the basics of using your Cintiq interactive pen display, you may want to customize the way

Cintiq works. This chapter describes how to use the Wacom Tablet control panel to adjust your interactive

pen display and input tool settings.

Advanced users can learn how to further optimize Cintiq by creating application-speciﬁc settings.

Opening the control panel

Control panel overview

Control panel settings

Opening the control panel

To open the Wacom Tablet control panel, use the Cintiq pen on the interactive pen display:

•

Windows.

Click on the Windows

START

button and choose A

ROGRAMS

. (For versions other than

Windows XP, choose the P

ROGRAMS

group.) Then select W

ACOM

ABLET

and choose the W

ACOM

ABLET

option.

•

Macintosh.

Open S

YSTEM

REFERENCES

from either the Dock, the Apple menu, or from the

PPLICATIONS

folder. Then click on the W

ACOM

ABLET

icon.

After you have opened the control panel, you can begin customizing Cintiq.

USTOMIZING

NDEX

ONTENTS

NDEX

ONTENTS

Control panel overview

Use the Wacom Tablet control panel to customize Cintiq.

As you explore the control panel, experiment with different settings to ﬁnd what works best for you.

Any changes you make will take effect immediately, but you can always click D

EFAULT

to return a tab to the

factory settings. See control panel settings for more information on the features and functions of each tab.

Tool Tips are available for most control panel items. Simply position the screen cursor over an item and let it

rest there; in a few moments the Tool Tip will pop up.

Additionally, your keyboard tab and arrow keys can be used to navigate the control panel.

Tabs display

customizable settings

for the selected tool.

Displays a dialog

box containing

information about

the pen display

tablet and software,

including an option

to access the

DIAGNOSTICS dialog

box.

The DEFAULT button

resets the selected

tab to its default

settings.

The upper portion of the control panel displays icons representing your

TABLET, TOOLs, and the APPLICATIONs with customized tool settings.

Choose FUNCTIONS

to customize your

Cintiq ExpressKeys,

Touch Strips, and

Pop-up Menu

settings.

Choose PEN to

customize your

Cintiq pen settings.

Displays advanced options. Displays this manual.

USTOMIZING

NDEX

ONTENTS

NDEX

ONTENTS

Control panel lists and tabs:

The control panel T

ABLET

, T

OOL

, and A

PPLICATION

lists allow you to select the

tablet, tool, or application for which you want to change settings. To change tool settings, open the control

panel using the tool you wish to customize. The tool will be automatically selected in the T

OOL

list, and the

appropriate tabs will be displayed. To customize settings for a different tool, select it from the T

OOL

list by

clicking on its icon (the appropriate tabs will be displayed). See customizing the pen and customizing the

tablet functions for more information.

Note:

The control panel A

PPLICATION

list is for advanced users; it is not necessary to select or add

applications in order to customize your Cintiq input tool(s).

Control panel settings

Use these sections as a reference when working with the Wacom Tablet control panel; they provide detailed

information about each tab and some of the more complex topics. Many of the sections also contain useful

customizing tips.

Calibrating the interactive pen display

Adjusting frequency and tracking (VGA only)

Customizing the pen

Customizing the tablet functions

Customizing the Pop-up Menu

Working with multiple tools

Working with application-speciﬁc settings

Changing the tablet mode

Installing multiple tablets

The TABLET list displays an icon for any

supported tablet that has been installed on

your system. All settings shown below this

list apply to the selected tablet.

The TOOL list displays an icon for the tablet

FUNCTIONS, and for each Cintiq input tool that

has been used on the tablet. When a new

tool is ﬁrst used on the tablet it is

automatically added to the tool list, and

functions with the default settings. See also

working with multiple tools.

The APPLICATION list lets you deﬁne tool

settings that only apply to a speciﬁc

application. See working with application-

speciﬁc settings.

Your current selections are highlighted.

USTOMIZING

NDEX

ONTENTS

NDEX

ONTENTS

Calibrating the interactive pen display

You will need to calibrate the pen display tablet in order to align the screen cursor position with the position

of the pen on the display screen. This is required to adjust for parallax caused by the display screen cover

glass and coating. Set Cintiq in its working position, then follow the procedure below.

Important: When using a VGA connection with

Cintiq, make sure the LCD monitor is properly

adjusted before calibrating the tablet.

1. In the Wacom Tablet control panel, select the

Grip Pen from the TOOL list and then select

the CALIBRATE tab.

2. If you are working with multiple monitors,

select the MONITOR option corresponding to

Cintiq. (Only monitors that are set to one of

the resolutions supported by Cintiq will

appear in the list.)

3. Click on the CALIBRATE... button to activate

the calibration screen.

4. Holding the pen and positioning your head

as you normally do when working with the

tablet, use the pen tip to click on the center

of the crosshairs in the upper-left corner.

5. Then click on the center of the crosshairs

that are displayed in the lower-right corner.

6. Test the alignment and click OK to accept

the calibration. Click TRY AGAIN to

recalibrate.

Be sure to read the directions in the

calibration screen for detailed instructions

and additional options. The calibration

setting applies to all applications.

Note: If more than one pen display tablet is

installed on your system, be sure to select the

Cintiq unit you are working with from the control

panel’s TABLET list.

Crosshairs

Adjustment pattern for frequency and

tracking. See adjusting frequency and

tracking (VGA only) for details.

Tip: If you prefer to see the screen cursor slightly offset from the actual position of the pen

tip, calibrate by clicking on a spot showing that offset from the crosshairs. For example, to

have the screen cursor appear 1/10th of an inch above and to the left of the pen tip, calibrate

by clicking on a spot 1/10th of an inch below and to the right of the crosshairs.

USTOMIZING

NDEX

ONTENTS

NDEX

ONTENTS

Adjusting frequency and tracking (VGA only)

Some computers and video cards may not allow the multi-sync function to fully work when Cintiq is ﬁrst

connected. If some portion of the text appears blurred, adjust frequency and tracking by following the

procedure below. For crisp images, set the resolution of your video card to 1600 x 1200.

1. In the Wacom Tablet control panel, select the

CALIBRATE tab.

2. If you are working with multiple displays, be

sure the display corresponding to Cintiq is

selected in the MONITOR menu.

3. Click on the CALIBRATE... button to activate

the calibration screen.

4. Press the Cintiq MENU button to view the On

Screen Display (OSD) settings. From the

MAIN MENU, select the IMAGE SCREEN... and

FREQUENCY options, then adjust the

frequency level so that the pattern of ﬁne

vertical stripes displays evenly. (For details

on changing the OSD settings, see Adjusting

the LCD monitor in the Cintiq Installation

Guide and Hardware Manual.)

5. In the OSD Menu, select the IMAGE

SCREEN... and TRACKING options. Adjust the

tracking level so that the adjustment pattern

shows clearly.

6. After completing these adjustments, exit the

OSD Menu.

Click on the CANCEL button or press ESC to

exit the calibration screen.

Adjustment pattern for

frequency and tracking.

CUSTOMIZING

INDEX

CONTENTS

INDEX

CONTENTS 8

Customizing the pen

Customizing your Cintiq pen is easy. First open the Wacom Tablet control panel using the pen. The pen will

be selected in the TOOL list and the appropriate tabs will be displayed. Select a tab and choose from the

available options.

Optional pens

Wacom offers a number of optional pens, such as the Intuos3 Art Pen and Intuos3 Airbrush, that are

compatible for use with the Cintiq 21UX. (See the Cintiq 21UX Installation Guide and Hardware Manual for

more information.) These tools are fully supported in the driver software, and will appear in the Wacom

Tablet control panel TOOL list after touching the active area of the interactive pen display with the pen tip.

The control panel will automatically update to show the new tool and the options available for customization.

In applications supporting the features of these pens, you can adjust the functionality of the Art Pen rotation

or the Airbrush ﬁngerwheel within the application. Please refer to the documentation that came with your

application for details.

If you will be using these optional tools on your pen display tablet, be sure to visit Wacom’s web site for a list

of applications that currently support the advanced features of these tools.

Adjusting eraser feel

Adjusting tip feel and double-click

Customizing tilt sensitivity

Customizing tool buttons

Working with application-speciﬁc settings

CUSTOMIZING

INDEX

CONTENTS

INDEX

CONTENTS 9

Adjusting tip feel and double-click

To adjust the tip sensitivity of your Cintiq pen, select the PEN tab. To create broad brush strokes or to click

with a light touch, use a soft tip setting. For maximum control while drawing thin lines, use a ﬁrm tip setting.

Customizes the amount of pressure

needed to click or draw. Drag the

slider to a softer or ﬁrmer setting.

With your screen cursor positioned

over an empty area of your control

panel, press down on the tablet with

your pen tip to test the current tip

feel setting. You can use the

CURRENT PRESSURE bar to

determine how hard you must press

on the pen to reach maximum

pressure.

Displays the tip FEEL DETAILS dialog

box where you can further

customize the tip sensitivity.

Hints:

• Use a soft TIP FEEL for a wider range of pressure values with most pressure-sensitive

applications.

• In some applications a soft pressure setting can make the pen overreact – any small

press on the pen is magniﬁed on the screen. If you experience this, try a ﬁrmer TIP

FEEL setting.

•Double-clicking: To make double-clicking easier, expand the tap area that accepts a

double-click (the double-click distance).

Note: A large double-click distance may cause a delay at the beginning of your

brushstrokes in some drawing applications. If you notice such effects, try setting a

smaller double-click distance and using the side switch to double-click. You can also set

one of the ExpressKeys to double-click.

Returns the tab settings

to their factory default

conditions.

Adjusts the size of the double-click area.

A larger setting makes double-clicking

easier.

Drag the slider to the OFF position if you

do not want double-click assist.

CUSTOMIZING

INDEX

CONTENTS

INDEX

CONTENTS 10

Adjusting eraser feel

To adjust the eraser sensitivity of your Cintiq pen, select the ERASER tab. To erase with a broad stroke or to

click with a light touch, use a soft eraser setting. For maximum control while erasing, use a ﬁrm eraser

setting.

Select the button function to

perform when using the eraser.

Returns the tab

settings to their factory

default conditions.

Customizes the amount of pressure

needed to erase. Drag the slider to a

softer or ﬁrmer setting.

Displays the eraser FEEL DETAILS

dialog box where you can further

customize the eraser sensitivity.

With your screen cursor positioned

over an empty area of your control

panel, press down on the tablet with

your tool’s eraser to test the current

eraser feel setting. You can use the

CURRENT PRESSURE bar to

determine how hard you must press

on the eraser to reach maximum

pressure.

Andere Handbücher für Cintiq 21UX

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Wacom Grafiktablett Handbücher

Wacom

Wacom DTF-720 - OTHER Fehlerbehebungshandbuch

Wacom

Wacom PENPARTNER - ANNEXE 474 Bedienungsanleitung

Wacom

Wacom DTF-720 - OTHER Montageanleitung

Wacom

Wacom Cintiq Pro 32 Bedienungsanleitung

Wacom

Wacom CTT-460 Bedienungsanleitung

Wacom

Wacom BAMBOO Fineline 2 Bedienungsanleitung

Wacom

Wacom PTK-540WL - Bedienungsanleitung

Wacom

Wacom BAMBOO PEN AND TOUCH Bedienungsanleitung

Wacom

Wacom Cintiq 21UX Bedienungsanleitung

Wacom

Wacom Cintiq 21UX Bedienungsanleitung

Wacom

Wacom PENPARTNER 2 - Bedienungsanleitung

Wacom

Wacom GRAPHIRE - FOR MACINTOSH Bedienungsanleitung

Wacom

Wacom Cintiq 21UX Bedienungsanleitung

Wacom

Wacom intuos pro PTH-451 Bedienungsanleitung

Wacom

Wacom CINTIQ 17SX Montageanleitung

Wacom

Wacom GRAPHIRE 2 - FOR MAC Bedienungsanleitung

Wacom

Wacom DTF-720 - OTHER Bedienungsanleitung

Wacom

Wacom Cintiq 12 WX DTZ-1200W Bedienungsanleitung

Wacom

Wacom PENPARTNER - USB Bedienungsanleitung

Wacom

Wacom VOLITO 2 - Bedienungsanleitung

Wacom

Wacom DTK-2241 Bedienungsanleitung

Wacom

Wacom BAMBOO TOUCH Bedienungsanleitung

Wacom

Wacom 12WX Bedienungsanleitung

Wacom

Wacom Cintiq 18SX Bedienungsanleitung

Beliebte Grafiktablett Handbücher anderer Marken

BandRich

BandRich WritFun W120 Bedienungsanleitung

Evolveo

Evolveo Grafico T8 Bedienungsanleitung

Kanvus

Kanvus Artist 127 Bedienungsanleitung

GAOMON

GAOMON PD156 PRO Installationsanleitung

Parblo

Parblo A610 Plus Bedienungsanleitung

Huion

Huion KD200 Bedienungsanleitung

Orbit Research

Orbit Research GRAPHITI Bedienungsanleitung

CSSN

CSSN SigniShell LCD 3x2 Bedienungsanleitung

GAOMON

GAOMON S630 Bedienungsanleitung

HP 9111A Bedienungsanleitung

Huion

Huion Kamvas Pro 13 Bedienungsanleitung

Huion

Huion KAMVAS Pro 16 4K Bedienungsanleitung

Genius

Genius 1812HR Handbuch

Huion

Huion Inspiroy 2 S Bedienungsanleitung

Huion

Huion KAMVAS GT-191 V2 Bedienungsanleitung

Bosto

Bosto 22HD Bedienungsanleitung

VisTablet

VisTablet Original 12" VT ( ) Merkblatt

Perrix

Perrix Peritab-301 Bedienungsanleitung