Wagan 7407 Bedienungsanleitung

Item No. / Artículo No/ Article n° : 7407

15A Intelligent

Battery Charger

User’s Manual / Manual de Usuario / Guide d’Utilisation

We are constantly improving our products so speciﬁcations are subject to change

without notice. Visit our website for the latest product information.

Estamos mejorando nuestros productos constantemente, por lo tanto, las

especiﬁcaciones están sujetas a cambios sin previo aviso. Visite nuestro sitio

web para obtener la información más reciente de los productos.

Nous améliorons constamment nos produits, alors les spéciﬁcations sont sujettes à changement

sans préavis. Visitez notre site Web, pour obtenir les dernières informations sur nos produits.

15A Intelligent Battery Charger by Wagan Tech®

1www.wagan.com

Thank you for purchasing the 15A Intelligent Battery Charger by Wagan Tech®.

With normal care and proper treatment, it will provide years of reliable service.

Please read all operating instructions carefully before use.

FEATURES

6' AC Cord 6' Charging

Cord

Heavy-duty

Clamps

LCD Display

Charge Button

Recondition

Button

Winter Mode

Button

Battery Type

Button

Amperage

Button

SPECIFICATIONS

Charging Rates 12V, (2A, 8A or 15A)

Input Voltage 110 -14 0V AC

Battery types Lead Acid (wet, AGM, Gel)

Lithium (LiFePO4)

Wagan Tech and wagan.com are trademarks of Wagan Corporation.

User’s Manual—Read before using this equipment

# of Charging Stages 6

Charging Stages Soft Start, Bulk, Absorption, Check, Reconditioning,

Maintenance

Safety Features Short Circuit, Reverse Connection, Over Charge, Over

Heat

Cable length AC Cord: 6 ft

DC Clamps: 6 ft

Dimensions (HWD) 9.0 × 5.0 × 8.0 in

Weight 3.2 lbs

IMPORTANT SAFETY INSTRUCTIONS

1. This appliance is not intended for use by persons (including children) with

reduced physical, sensory or mental capabilities, or lack of experience

and knowledge, unless they have been given supervision or instruction

concerning use of the appliance by a person responsible for their safety.

Children should be supervised to ensure that they do not play with the

appliance.

2. Working in vicinity of a lead-acid battery is dangerous. Batteries generate

explosive gases during normal battery operation. For this reason, it is of

utmost importance that each time before using your charger, you read this

manual and follow the instruction exactly.

3. To reduce risk of battery explosion, follow these instructions and those

published by the battery manufacturer and manufacturer of any equipment

you intend to use in vicinity of battery. Review cautionary markings on these

products and on engine.

4. Do not operate charger with damaged cord or plug. Have cord replaced

immediately.

15A Intelligent Battery Charger by Wagan Tech®

3www.wagan.com

5. Do not operate charger if it has received a sharp blow, been dropped,

or otherwise damaged in any way. Take it to a qualiﬁed professional for

inspection and repair.

6. Do not disassemble charger. Take it to a qualiﬁed professional when service

or repair is required. Incorrect reassembly may result in electric shock or

ﬁre.

PERSONAL PRECAUTIONS AND SAFETY

1. WARNING: Wear complete eye protection and clothing protection, when

working with lead-acid batteries.

2. Make sure someone is within range of your voice or close enough to come

to your aid when you work with or near a lead-acid battery.

3. Have plenty of fresh water and soap nearby for use if battery acid contacts

skin, clothing, or eyes. If battery acid contacts skin or clothing, wash

immediately with soap and water.

4. Avoid touching your eyes while working with a battery. Acid particles

(corrosion) may get into your eyes! If acid enters your eye, immediately

ﬂood eye with running cold water for at least 10 minutes. Get medical

attention immediately.

5. Remove all personal metal items such as rings, bracelets, necklaces, and

watches when working with a lead-acid battery.

6. Take care not to drop a metal tool or other metal onto the battery. Metal

may cause sparking or short circuit the battery or another electrical devise.

Sparking may cause an explosion.

7. Always operate battery charger in an open well ventilated area.

8. NEVER smoke or allow a spark or ﬂame in the vicinity of the battery or

engine. Batteries generate explosive gases!

Wagan Tech and wagan.com are trademarks of Wagan Corporation.

User’s Manual—Read before using this equipment

PREPARATION FOR CHARGING

Use charger for charging LEAD-ACID and LiFePO4 batteries only.

Do not use battery charger for other types of batteries, which may burst

and cause injury to persons and damage to property.

Use only attachments recommended or sold by manufacturer. Use of non-

recommended attachments may result in fire, electric shock, or injury.

When disconnecting the battery charger, pull by the plug not by the cord.

Pulling on the cord may cause damage to cord or plug.

To reduce risk of electric shock, unplug charger from outlet before

attempting any maintenance or cleaning.

NEVER charge a frozen battery. If battery fluid (electrolyte) is frozen, bring

into a warm area to thaw before charging.

NEVER place charger directly above battery being charged. Gases from

battery will corrode and damage charger.

NEVER touch the battery clamps together when the charger is energized.

NEVER crank engine with charger attached to battery.

CHARGER LOCATION

1. Always charge battery in a well ventilated area. NEVER operate in a

closed-in or restricted area without adequate ventilation. WARNING: Risk of

explosive gas.

2. Locate charger as far away from battery as DC charger cable’s permit.

3. Do not expose charger to rain or snow.

4. Intended for indoor use only.

15A Intelligent Battery Charger by Wagan Tech®

5www.wagan.com

BATTERY TYPES

This charger can charge four basic types of batteries:

• Conventional and Low Maintenance Batteries

• Maintenance Free Batteries/ AGM batteries

• Deep Cycle Batteries

• 14.4V (+/- 0.5V) Lithium Iron Phosphate (LiFePO4) Batteries can be charged

with this unit. Do not select a charging rate above 2 amps so as to extend

the life of your battery. If Lithium Iron Phosphate (LiFePO4) Battery voltage

is under 10 volts, it is not recommended that you use this charger as the

battery may be damaged.

CHARGING BATTERY

Charging Batteries in Vehicle

1. Position AC and DC cords to reduce risk of damage by hood, door, or

moving engine part.

2. Stay clear of fan blades, belts, pulleys, and other parts that can cause

injury to persons.

3. Check polarity of battery posts. POSITIVE (POS, P, +) and NEGATIVE (NEG,

N, –).

4. Determine which post of battery is grounded (connected) to the chassis.

If negative post is grounded to chassis (as in most vehicles), connect

POSITIVE (RED) clamp from battery charger to POSITIVE (P0S, P, +)

ungrounded post of battery. Connect NEGATIVE (BLACK) clamp to vehicle

Wagan Tech and wagan.com are trademarks of Wagan Corporation.

User’s Manual—Read before using this equipment

chassis or engine block away from battery. Do not connect clamp to

carburetor, fuel lines, or sheet-metal body parts. Connect to heavy gauge

metal part of the frame or engine block.

If positive post is grounded to the chassis (uncommon), connect NEGATIVE

(BLACK) clamp from battery charger to NEGATIVE (NEG, N, -) ungrounded

post of battery. Connect POSITIVE (RED) clamp to vehicle chassis or engine

block away from battery. Do not connect clamp to carburetor, fuel lines, or

sheet-metal body parts. Connect to a heavy gauge metal part of the frame

or engine block.

5. When disconnecting charger, disconnect AC cord ﬁrst, remove clamp from

vehicle chassis, and then remove clamp from battery terminal.

6. Do not charge the battery while the engine is operating.

Charging Battery Outside of Vehicle

Note: If using this battery charger for a marine battery, the battery must be

removed and charged on shore unless you have purchased special equipment

designed for marine use to allow for onboard charging.

1. Check the polarity of the battery posts.

Note: The positive (+) post is usually larger in diameter than the negative (-)

post.

2. Attach at least a 24 inch 6-gauge insulated battery cable to the negative (-)

battery post.

15A Intelligent Battery Charger by Wagan Tech®

7www.wagan.com

3. Connect the red positive (+) charger clip to the positive (+) battery post.

4. Place the free end of the battery cable as far away from the battery to

be charged as the cables permit and then connect the black negative (-)

charger clip to the free end of the cable. NEVER face the battery when

making the connection.

5. Plug the AC power cord/plug into a properly grounded outlet.

6. When disconnecting the charger, always use the reverse order from the

connection process, staying as far away as possible from the battery.

OPERATING INSTRUCTIONS

1. Follow directions on page 5 to connect Charger to battery, then plug the

Power Cord into a properly grounded outlet. If the cable clamps are not

connected or the connection is loose, the LCD screen will display as shown

in Figure A.

Figure A

2. When a good connection has been made, the LCD screen will display the

battery capacity and voltage. See example in Figure B.

Figure B

Wagan Tech and wagan.com are trademarks of Wagan Corporation.

User’s Manual—Read before using this equipment

3. Press the “AMP” button to choose the desired charging rate (2A, 8A, 15A

or Auto) – if unsure select the automatic charging rate. Press the “BATTERY

TYPE” button to select battery type (standard, AGM, Gel or Lithium

(LiFePO4)) – then press the “CHARGE” button to start charging. The LCD

screen will display the settings. See example in Figure C.

Figure C

Note: If user does not select the charging amp and battery type settings within 30

seconds, Charger will start charging the battery using the default setting – automatic

charging rate for standard battery.

4. Once the battery is fully charged the Charger automatically switches to a

ﬂoat charge/maintenance mode.

5. For weak/sulfated batteries or batteries that have been unused for long

periods of time, the battery reconditioning function may be used to recover

the battery from deep discharge and help the battery last longer. Press

the “RECONDITION” button to activate this function. The LCD screen will

display as shown in Figure D.

Figure D

15A Intelligent Battery Charger by Wagan Tech®

9www.wagan.com

6. When the reconditioning process is ﬁnished, the LCD screen will display as

shown in Figure E and the Charger will return to normal charge mode.

Figure E

7. The winter charging mode may be used for specialized battery charging in

winter weather conditions. To enter this mode, press the “WINTER” button

at any stage in the charging process.

A snowﬂake icon will appear in the LCD screen display indicating Charger

is in the winter charging mode. See example in Figure F. Pressing the

“WINTER” button again will exit the winter charging mode.

Figure F

Inhaltsverzeichnis

Sprachen:

Andere Wagan Akkuladegerät Handbücher

Wagan

Wagan 7402 Bedienungsanleitung

Wagan

Wagan 2045 Bedienungsanleitung

Wagan

Wagan Solar ePower 2053 Bedienungsanleitung

Wagan

Wagan Solar e Power Cube 1500 Plus Bedienungsanleitung

Wagan

Wagan 2889 Travel Charge Bedienungsanleitung

Wagan

Wagan TwinSoket 2104 Bedienungsanleitung

Wagan

Wagan Travel Charge DC Link 2.4 Bedienungsanleitung

Wagan

Wagan 2558 Bedienungsanleitung

Wagan

Wagan Deluxe Power Backup Bedienungsanleitung

Wagan

Wagan 25A-7410 Bedienungsanleitung

Wagan

Wagan Solar e Charger Exec-Duo Bedienungsanleitung

Wagan

Wagan Solar e Charger Bedienungsanleitung

Wagan

Wagan Power Dome LT 2464 Bedienungsanleitung

Wagan

Wagan 8324 Bedienungsanleitung

Wagan

Wagan 7406 Bedienungsanleitung

Wagan

Wagan TravelCharge Companion GO-Plus2 Bedienungsanleitung

Wagan

Wagan 7403 Bedienungsanleitung

Wagan

Wagan Power Dome 400 Bedienungsanleitung

Wagan

Wagan 2467-ES Bedienungsanleitung

Wagan

Wagan Companion GO Bedienungsanleitung

Wagan

Wagan Solar e Link Glide Bedienungsanleitung

Wagan

Wagan Solar e Charger Solo Bedienungsanleitung

Beliebte Akkuladegerät Handbücher anderer Marken

AA Portable Power Corp

AA Portable Power Corp Universal Smart Charger Bedienungsanleitung

Enelion

Enelion Vertica Bedienungsanleitung

RCA

RCA CHU6 Bedienungsanleitung

ANSMANN

ANSMANN ALCT 6/24-10 Bedienungsanleitung

Hitachi

Hitachi UC 18YRSL Fehlerbehebungshandbuch

Olympus

Olympus B-20 LPC Bedienungsanleitung

Exibel

Exibel ZH1708143 Bedienungsanleitung

Lenmar

Lenmar Mach 1 Bedienungsanleitung

CTEK

CTEK MXS 5.0 Bedienungsanleitung

ABB

ABB HT842379 Bedienungsanleitung

Nitecore

Nitecore Superb Charger SC4 Bedienungsanleitung

Renogy

Renogy RBC2125DS-21W Bedienungsanleitung

Braun

Braun BWC02M Bedienungsanleitung

CTEK

CTEK MXS 3.6 Bedienungsanleitung

Black & Decker

Black & Decker BDV090 Bedienungsanleitung

Trinity

Trinity DPD Bedienungsanleitung

Hulkman

Hulkman Sigma 1 Bedienungsanleitung

IKEA

IKEA koppla Bedienungsanleitung