WAGNER AquaCoat 5010 GA 5000EAW Bedienungsanleitung

B_06146

AquaCoat 5010 / 5020

GA 5000EAW

Low pressure

Automatic

Air Spraying System

for Non-ignitable Liquids

Version 03/2018

VERSION 03/2018 ORDER NUMBER DOC 2369735

Table of Contents

1 ABOUT THESE INSTRUCTIONS 7

1.1 Preface 7

1.2 Warnings, Notices and Symbols in these Instructions 7

1.3 Languages 8

1.3.1 Operating Manuals for the Individual Components 8

1.4 Abbreviations 8

1.5 Terminology for the Purpose of this Manual 9

2 CORRECT USE 10

2.1 Device Type 10

2.2 Type of Use 10

2.3 Field of Application 10

2.4 Processible Working Materials 11

2.5 Misuse 11

3 IDENTIFICATION 12

3.1 CE Identication 12

3.2 Type Plates 12

3.3 Safety Signage 13

4 BASIC SAFETY INSTRUCTIONS 14

4.1 Safety Instructions for the Operator 14

4.1.1 Electrical Devices and Equipment 14

4.1.2 A Safe Work Environment 14

4.1.3 Personnel Qualications 15

4.2 Safety Instructions for Sta 15

4.2.1 Personal Safety Equipment 15

4.2.2 Safe Handling of WAGNER Spray Devices 16

4.2.3 Ground the Unit 16

4.2.4 Product Hoses 17

4.2.5 Cleaning and Flushing 18

4.2.6 Touching Hot Surfaces 19

4.2.7 Maintenance and Repair 19

4.2.8 Protective and Monitoring Equipment 19

4.2.9 Safety-relevant Information about Discharges 19

5 DESCRIPTION 20

5.1 Components 20

5.2 Mode of Operation 24

5.3 Protective and Monitoring Equipment 24

5.4 Included Items 26

5.5 Technical Data 28

5.5.1 AquaCoat 5010/5020 Entire System 28

5.5.2 Product Pressure Generator 29

5.5.3 VM5020WA Control Unit 30

5.5.4 GA 2800EAW Automatic Gun 31

5.5.5 AquaCoat Electric Block Diagram 33

VERSION 03/2018 ORDER NUMBER DOC 2369735

5.6 Operating Elements 34

5.6.1 VM5020WA Control Unit 34

5.6.2 Product Pressure Generator 38

5.7 GA 5000EAW Automatic Gun 39

5.7.1 Components 39

5.7.2 Mode of Operation 40

5.7.3 Securing the Spray Gun against Actuation 41

5.7.4 Stop Screw Valve Rod 41

5.7.5 Spraying Procedure for Round and Flat Jet Air Atomizing 42

5.7.6 The Electrostatic Eect 43

5.8 Use with Two Automatic Guns 44

6 ASSEMBLY AND COMMISSIONING 46

6.1 Training of Assembly/Commissioning Sta 46

6.2 Storage and Installation Conditions 46

6.3 Transportation 46

6.4 Assembly and Installation 47

6.4.1 Assembling the AquaCoat System 47

6.4.2 Ventilation of the Spray Booth 49

6.4.3 Pneumatic Connections 49

6.4.4 Product Connections 50

6.5 Grounding 50

6.6 Safety Checks 52

6.7 Preparation of Water-based Lacquer 52

6.7.1 Viscosity Conversion Table 52

6.8 Commissioning 53

6.8.1 Preparation 53

6.8.2 Commissioning 53

6.8.3 Verifying a Safe Operational Condition 55

7 OPERATION 56

7.1 Training the Operating Sta 56

7.2 Electrical Discharge 56

7.3 Emergency Deactivation 57

7.4 Working 58

7.4.1 Starting the System 58

7.4.2 Adjusting the Spray Angle 59

7.4.3 Pressure Relief/Work Interruption 61

7.4.4 Changing the Nozzle, Changing from Round Jet/Flat Jet 62

7.4.5 Cleaning of the Nozzle Parts 63

7.4.6 Starting up the VM 5020WA Control Unit 63

7.4.7 Set and Save Recipes 64

7.4.8 Setting the High Voltage 65

7.4.9 Setting the Current Limitation 66

7.4.10 Display during Spraying Mode 67

7.4.11 Standby Mode 67

7.4.12 Operating Hours Counter/Service Display 68

VERSION 03/2018 ORDER NUMBER DOC 2369735

7.5 Device Conguration 70

7.5.1 Overview of Parameters 70

7.5.2 Access to the Device Conguration Mode 71

7.5.3 Setting Example: "Parameter C13" 73

7.6 External Interface 74

8 CLEANING AND MAINTENANCE 76

8.1 Cleaning 76

8.1.1 Cleaning Sta 76

8.1.2 Safety Instructions 76

8.1.3 Flushing and Cleaning the System 77

8.1.4 Decommissioning 78

8.1.5 Long-term Storage 78

8.2 Maintenance 79

8.2.1 Maintenance Sta 79

8.2.2 Safety Instructions 79

8.2.3 Safety Checks and Maintenance Intervals 80

8.2.4 Product Hoses, Tubes and Couplings 81

8.2.5 Dismounting Gun Cover 81

8.2.6 Replacing the Valve Seat 81

8.2.7 Replacing the Product Hose 82

9 TROUBLESHOOTING 84

9.1 Fault Displays at the VM 5020WA Control Unit 84

9.2 Faults in the System 86

10 REPAIRS 87

10.1 Repair Sta 87

10.2 Safety Instructions 87

10.3 Mounting Materials 88

10.4 Spray Gun 88

10.4.1 Tools 88

10.4.2 Dismantling of the Spray Gun 89

10.4.3 Cleaning the Parts after Disassembly 92

10.4.4 Assembling the Spray Gun 92

10.5 Disassembling VM 5020WA Control Unit 97

10.6 Opening the Control Unit 97

11 FUNCTION TEST AFTER THE REPAIR 98

11.1 Function Tests for Spray Gun 99

11.1.1 Air Tests 99

11.1.2 Product Pressure Test 100

11.1.3 Check Spray Pattern 100

12 DISPOSAL 101

VERSION 03/2018 ORDER NUMBER DOC 2369735

13 ACCESSORIES 102

13.1 Valve Seats/Valve Tips 102

13.2 Round Spray Nozzles 102

13.2.1 Adjustable EAWRV5000 Round Jet Nozzle 102

13.2.2 AWR 5000 Air Caps and Nozzles 102

13.2.3 Discharge Quantity Measurements with Lacquer 103

13.3 Flat Jet Nozzles 104

13.3.1 AF 5000 Air Caps 104

13.3.2 AF 5000 Flat Jet Nozzles 104

13.3.3 Discharge Quantity Measurements with Lacquer 105

13.4 Hoses and Cables 106

13.5 Product Pressure Regulator for DD10 106

13.6 Miscellaneous 106

14 SPARE PARTS 108

14.1 How can Spare Parts be Ordered? 108

14.2 AquaCoat Basic Device 109

14.2.1 VM5020WA Control Unit 114

14.3 Pump Sets 120

14.3.1 DD10 Set 120

14.3.2 DD10 Set with Product Pressure Regulator 121

14.3.3 ZIP52 Set 122

14.4 Spray Gun 124

14.4.1 GA 5000EAWIC 124

14.4.2 GA 5000EAWEC 127

14.4.3 Adapter 130

14.5 Accessories Spare Parts Lists 132

14.5.1 AWR 5000 Round Jet Nozzles 132

14.5.2 Adjustable EAWRV 5000 Round Jet Nozzles 133

14.5.3 Underframe with Rolls 134

14.5.4 Level Monitoring with Alarm Horn 135

14.5.5 D350 Drum Cover 136

15 DECLARATION OF WARRANTY AND CONFORMITY 137

15.1 Important Notes on Product Liability 137

15.2 Warranty Claim 137

15.3 EC Declaration of Conformity 138

VERSION 03/2018 ORDER NUMBER DOC 2369735

1 ABOUT THESE INSTRUCTIONS

1.1 PREFACE

The operating manual contains information about safely operating, maintaining, cleaning

and repairing the device.The operating manual is part of the device and must be available

to the operating and service personnel.

The device may only be operated by trained personnel and in compliance with this

operating manual. Operating and service personnel should be instructed according to the

safety instructions.

This equipment can be dangerous if it is not operated according to the instructions in this

operating manual.

1.2 WARNINGS, NOTICES AND SYMBOLS IN THESE INSTRUCTIONS

Warning instructions in this operating manual highlight particular dangers to users and to

the device and state measures for avoiding the hazard. These warning instructions fall into

the following categories:

DANGER Immediate risk of danger.

Non-observance will result in death or serious injury.

WARNING Potential risk.

Non-observance may result in death or serious injury.

CAUTION Potentially hazardous situation.

Non-observance may result in minor injury.

NOTICE Potentially hazardous situation.

Non-observance may result in damage to property.

Notice Provides information about particular characteristics and

how to proceed.

Explanation of warning:

LEVEL OF DANGER

This notice warns you of a hazard!

Possible consequences of not observing the warning instructions.

The measures for preventing the hazard and its consequences.

VERSION 03/2018 ORDER NUMBER DOC 2369735

1.3 LANGUAGES

The AquaCoat 5020 GA 5000EAW operating manual is available in the following languages:

Language Order No. Language Order No. Language Order No.

German 2369727 English 2369735 Chinese 2374090

French 2369734 Italian 2369737 Romanian 2382504

Spanish 2369736 Russian 2374089 -- --

Additional languages on request or at: www.wagner-group.com

1.3.1 OPERATING MANUALS FOR THE INDIVIDUAL COMPONENTS

Double diaphragm pump TOPFINISH DD10 operating manual

Language Order No. Language Order No. Language Order No.

German 2366669 English 2366672 Spanish 2369232

French 2369230 Italian 2369231 -- --

Double diaphragm pump ZIP52 GHSS7 operating manual

Language Order No. Language Order No. Language Order No.

German 2330425 English 2330426 Spanish 2335555

French 2335553 Italian 2332230 -- --

Product pressure regulator T0170.00BI operating manual

Language Order No. Language Order No. Language Order No.

German ZZB019GER English ZZB019ENG Spanish ZZB019SPA

French ZZB019FRE Italian ZZB019ITA -- --

Additional languages on request or at: www.wagner-group.com

1.4 ABBREVIATIONS

Order No. Order number

Spare part

Position

Marking in the spare parts lists

Number of pieces

Air electrostatic, water-based

EAWIC Internal shaping air setting on the

gun (Internal Control)

EAWEC External shaping air setting

(External Control)

Automatic gun

High voltage

High pressure

Wrench size

Low viscosity

High viscosity

Materials

Stainless steel

Polyether ether ketone

(high temperature-resistant

thermoplastic plastic)

VERSION 03/2018 ORDER NUMBER DOC 2369735

1.5 TERMINOLOGY FOR THE PURPOSE OF THIS MANUAL

GA5000EAW GA5000EAWIC or GA5000EAWEC

Cleaning Manual cleaning of devices and device parts with cleaning agent.

Flushing Internal ushing of paint-wetted parts with ushing agent.

Sta qualications

Trained person Is instructed in the tasks assigned to him/her, the potential risks

associated with improper behavior as well as the necessary

protective devices and measures.

Electrically trained

person

Is instructed by an electrician about the tasks assigned to him/her,

the potential risks associated with improper behavior as well as

the necessary protective devices and measures.

Electrician Can assess the work assigned to him/her and detect possible

hazards based on his/her technical training, knowledge and

experience in relevant provisions.

Skilled person in the

context of DGUV 209-052

A person who, based on his/her technical training, experience and

recent vocational experience, has sucient technical knowledge

in the area of electrostatic coating and is familiar with the relevant

and generally accepted rules of technology so that he/she can

inspect and assess the status of devices and coating systems

based on workplace safety.

Additional requirements for skilled persons can also be found

in TRBS 1203 (2010/amendment 2012): Expert knowledge in

the areas of protection against excessive pressure, electrical

hazards, and explosion protection (where applicable).

VERSION 03/2018 ORDER NUMBER DOC 2369735

2 CORRECT USE

2.1 DEVICE TYPE

Electrostatic spraying unit for automatic coating of grounded work pieces. The system is

suitable for air-atomizing applications.

The system is equipped with the AquaCoat 5010/5020 cabinet, the VM5020WA control unit,

a GA5000EAW automatic spray gun and matching product hose, a high-voltage generator,

all safety devices and one of the following spray product supplies:

- Double diaphragm pump,TOPFINISH DD10 (in accordance with the spare parts catalog)

- Double diaphragm pump, ZIP52 GHSS7 (in accordance with the spare parts catalog)

2.2 TYPE OF USE

AquaCoat 5010/5020 GA5020EAW can be used to spray liquid, non-ignitable products, in

particular non-ignitable coating products in accordance with Chapter 2.4.

WAGNER explicitly prohibits any other use!

The device may only be operated under the following conditions:

Use the device only to work with the products recommended by WAGNER.

Do not deactivate safety xtures.

Use only WAGNER original spare parts and accessories.

The operating personnel must be trained on the basis of this operating manual.

Follow the instructions in the operating manual.

2.3 FIELD OF APPLICATION

The device is not suitable for use in potentially explosive areas.

(See Chapter 3.1"CE Identication".)

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere WAGNER Spritzpistole Handbücher

WAGNER

WAGNER SUPER FINISH 23 CR Bedienungsanleitung

WAGNER

WAGNER Paint Crew HIGH PERFORMANCE AIRLESS SPRAYER Bedienungsanleitung

WAGNER

WAGNER GA 250AL Bedienungsanleitung

WAGNER

WAGNER HIGH-PERFORMANCE AIRLESS SPRAYER Bedienungsanleitung

WAGNER

WAGNER CONTROL SPRAY Benutzerhandbuch

WAGNER

WAGNER Home Decor Bedienungsanleitung

WAGNER

WAGNER PAINTCREW Bedienungsanleitung

WAGNER

WAGNER WallPerfect W 625 I-Spray Bedienungsanleitung

WAGNER

WAGNER Super Finish 21 Bedienungsanleitung

WAGNER

WAGNER PEA-T3XL Series Bedienungsanleitung

WAGNER

WAGNER GM 5000EA Bedienungsanleitung

WAGNER

WAGNER W 600 FLEXIO 18V Bedienungsanleitung

WAGNER

WAGNER Procoat 9185G Bedienungsanleitung

WAGNER

WAGNER AG-19 Bedienungsanleitung

WAGNER

WAGNER W200 Bedienungsanleitung

WAGNER

WAGNER W 140 P Bedienungsanleitung

WAGNER

WAGNER w 550 Bedienungsanleitung

WAGNER

WAGNER EPG-SPRINT XE Betriebshandbuch

WAGNER

WAGNER W 300 Bedienungsanleitung

WAGNER

WAGNER CONTROL SPRAY QX5 Bedienungsanleitung

WAGNER

WAGNER FINE COAT 9700 Bedienungsanleitung

WAGNER

WAGNER 4-STEP ELECTRONIC PRO DUTY POWER PAINTER Bedienungsanleitung

WAGNER

WAGNER FinishControl 5000 Bedienungsanleitung

WAGNER

WAGNER Power Painter Bedienungsanleitung

Beliebte Spritzpistole Handbücher anderer Marken

SNOWJOE

SNOWJOE Sunjoe 24V-GS-LTW-RM Bedienungsanleitung

Binks

Binks SV100 Bedienungsanleitung

Fimco

Fimco LG-4-3-1 Bedienungsanleitung

AG SPRAY

AG SPRAY FS-ATV-25BL Bedienungsanleitung

Nordson

Nordson MicroMax 2 Bedienungsanleitung

Bonide

Bonide 051 Bedienungsanleitung

zogics

zogics Z-DAS Bedienungsanleitung

KISANKRAFT

KISANKRAFT KK-KBS-165 Bedienungsanleitung

Matrix

Matrix SG 650 Bedienungsanleitung

Anest Iwata

Anest Iwata SGA-3 Kurzanleitung

paasche

paasche VV Datenblatt

Carlisle

Carlisle DeVilbiss JGA-510 Bedienungsanleitung

Gardena

Gardena 11120 Bedienungsanleitung

wiwa

wiwa 14025 R/F Bedienungsanleitung

Graco

Graco EM 390 Bedienungsanleitung

DeVilbiss

DeVilbiss LUNA2i Bedienungsanleitung

Graco

Graco HydroShield WMBH00 Stücklistenhandbuch

My Clean Buddy

My Clean Buddy PW018 Bedienungsanleitung