WAGNER PEM-X1 CG Betriebshandbuch

P_01725

Powder Cup Gun

PEM-X1 CG

Translation of the Original Operating Manual

0102 II2D2mJ

For professional use.

Always observe the information in this manual, particularly the safety

instructions and the warning instructions. Store the manual in a safe place. Edition: 10/2022

Operating manual Powder Cup Gun PEM-X1 CG

Table of Contents

Order number 2326960 | Edition 10/2022 3

TABLE OF CONTENTS

1 About these Instructions 6

1.1 Preface 6

1.2 Warnings, Notices and Symbols in these Instructions 6

1.3 General Characters and Symbols 6

1.4 Languages 7

1.5 Abbreviations 7

1.6 Terminology for the Purpose of this Manual 7

2 Using in Accordance with the Instructions 9

2.1 Device Type 9

2.2 Type of Use 9

2.3 For Use in Potentially Explosive Areas 9

2.4 Processible Working Materials 9

2.5 Misuse 9

3 Identification 10

3.1 Explosion Protection Identification 10

3.2 FM approval 10

3.3 Type Plate 10

3.4 Permissible device combinations 11

4 Basic Safety Instructions 12

4.1 Safety Instructions for the Operator 12

4.1.1 Electrical Devices and Equipment 12

4.1.2 A Safe Work Environment 12

4.1.3 Personnel Qualifications 13

4.2 Safety Instructions for the Personnel 13

4.2.1 Personal Safety Equipment 13

4.2.2 Safe Handling of WAGNER Powder Spray Devices 14

4.2.3 Grounding the Device 14

4.2.4 Product Hoses 14

4.2.5 Electrical Connection Cables 15

4.2.6 Cleaning and Flushing 15

4.2.7 Maintenance and Repair 15

4.2.8 Protective and Monitoring Equipment 16

4.3 Information about safe discharges 16

5 Description 18

5.1 Construction of the Cup Gun 18

5.2 Mode of Operation of the Cup Gun 18

5.3 Extent of Delivery 19

5.4 Data 19

5.4.1 Technical Data 19

5.4.2 Dimensions 20

5.5 Accessories 20

6 Assembly and Commissioning 21

6.1 Training of Assembly/Commissioning Personnel 21

6.2 Storage Conditions 21

6.3 Installation Conditions 21

6.4 Preparation of the Spray Gun 21

6.4.1 Selection of a Suitable Nozzle System 21

6.5 Powder Cup 23

Operating manual Powder Cup Gun PEM-X1 CG

Table of Contents

4 Order number 2326960 | Edition 10/2022

6.6 Assembling the Powder Cup 24

6.7 How to Use the Powder Cup 24

6.8 Connecting the Cup Gun 25

6.9 Grounding 25

6.9.1 Grounding the powder coating system 26

6.10 Safety Checks 26

7 Operation 27

7.1 Training the Operating Personnel 27

7.2 Tasks 27

7.3 Switching on the Manual Powder Spray Gun 27

7.4 Optimizing the Powder Cloud for Coating 27

7.4.1 Settings Recommendation for Total Air Volume 27

7.5 Double Click Program (High Dynamic Remote) 28

7.6 Switching off the Manual Gun 28

7.6.1 Pressure Relief / Work Interruption 29

7.7 Reproducible setting of the nozzle position 29

8 Cleaning and Maintenance 30

8.1 Cleaning 30

8.1.1 Cleaning Personnel 30

8.1.2 Cleaning Procedures 30

8.2 Maintenance 30

8.2.1 Maintenance Personnel 30

8.2.2 Maintenance Instructions 31

8.2.3 Safety Checks 31

8.2.4 Maintenance Procedures 31

8.3 Changing the Cup Gun 32

8.4 Changing the Flat Jet Nozzle 33

8.4.1 Removing the Flat Jet Nozzle 33

8.4.2 Fitting the Flat Jet Nozzle 34

8.5 Changing the Round Jet Nozzle 35

8.5.1 Removing the Round Jet Nozzle 35

8.5.2 Fitting the Round Jet Nozzle 36

8.6 Replacing the Protective Wedge 36

8.6.1 Removing the Protective Wedge 36

8.6.2 Installing the Protective Wedge 37

8.7 Changing Nozzle Types 38

8.8 Assembly of the CoronaStar 40

8.9 Replacing the Suspension Hook 41

8.10 Replacing the Collector Nozzle 41

8.11 Replacing the Connecting Tube 42

9 Troubleshooting and Rectification 44

10 Inspections in Accordance with DIN EN 50050-2: 2013 45

10.1 Abbreviations 45

10.2 Overview Table 46

11 Disassembly and Disposal 47

11.1 Disassembly 47

11.2 Disposal 47

12 Accessories 48

12.1 Nozzle systems 48

12.1.1 Flat Jet Nozzles System X1 48

Operating manual Powder Cup Gun PEM-X1 CG

Table of Contents

Order number 2326960 | Edition 10/2022 5

12.1.2 X1 F Flat Jet Nozzles System 48

12.1.3 X1 R Round Jet Nozzles System 49

12.1.4 Nozzle extension 49

12.2 Powder Cup 51

12.2.1 Powder Cup, 210 ccm 51

12.2.2 Powder Cup, 1 Liter 51

12.3 Cup Holder 52

12.4 Retrofit Set CoronaStar 52

12.5 Wedge tool 52

12.6 Wall mount 53

12.7 Recipe sticker 53

12.8 Powder measuring adapter 53

12.8.1 Powder Measuring Adapter for X1 Flat Jet Nozzle 54

12.9 PEM-X1 CG portable set 54

13 Spare Parts 56

13.1 How to Order Spare Parts 56

13.2 Notes on the Use of Spare Parts 56

13.3 PEM-X1 CG Corona Cup Gun 57

13.4 X1 R Electrode Holder 58

13.5 Powder Cup 59

13.6 Connecting part 59

13.7 Connecting Tube, Collector Nozzle 59

14 Declaration of Conformity 61

14.1 EU Declaration of Conformity - Manual Gun 61

14.2 FM Control Document 61

Operating manual Powder Cup Gun PEM-X1 CG

1 About these Instructions

6 Order number 2326960 | Edition 10/2022

1 ABOUT THESE INSTRUCTIONS

1.1 PREFACE

The operating manual contains information about safely operating, maintaining, cleaning

and repairing the device. The operating manual is part of the device and must be available

to the operating and service personnel.

The device may only be operated by trained personnel and in compliance with this

operating manual. Operating and service personnel should be instructed according to the

safety instructions.

This equipment can be dangerous if it is not operated according to the instructions in this

operating manual.

1.2 WARNINGS, NOTICES AND SYMBOLS IN THESE INSTRUCTIONS

Warning instructions in this manual highlight particular dangers to users and to the device

and state measures for avoiding the hazard.

These warning instructions fall into the following categories:

DANGER Immediate risk of danger.

Non-observance will result in death or serious injury.

WARNING Potential danger.

Non-observance may result in death or serious injury.

CAUTION Potentially dangerous situation.

Non-observance may result in minor injury.

NOTICE Potentially dangerous situation.

Non-observance may result in damage to property.

Info Provides information about particular characteristics and how to

proceed.

Explanation of warning notice:

WARNING

This notice warns you of a danger!

Possible consequences of not observing the warning notice.

4The measures for preventing the hazard and its consequences.

1.3 GENERAL CHARACTERS AND SYMBOLS

The characters and symbols in this operating manual indicate the following:

üRequirement that must be fulfilled before an action can be performed.

1. Step 1 of an action to be performed with several action steps.

4Second level action step

2. Step 2

ðIntermediate result of an action

ðResult of a complete action

4Action to be performed with an action step

1. Numbered list, first level

– Numbered list, second level

Operating manual Powder Cup Gun PEM-X1 CG

1 About these Instructions

Order number 2326960 | Edition 10/2022 7

– Non-numbered list, first level

– Non-numbered list, second level

= cross-reference on page

♦ = wearing parts

⋆ = included in service set

● = not part of the standard equipment but available as a special accessory

1.4 LANGUAGES

The operating manual is available in the following languages:

Original operating manual

Language Order no.

German 2326959

Translation of the original operating manual

Language Order no. Language Order no.

English 2326960 Polish 2410120

French 2326961 Croatian 2417169

Italian 2326962

Spanish 2326963

Russian 2333347

Chinese 2333348

Additional languages upon request or at: www.wagner-group.com

1.5 ABBREVIATIONS

Order no. Order number

ET Spare part

K Marking in the spare parts lists

Pos Position

Stk Number of pieces

-- Item not available as spare part

/ Item does not exist

1.6 TERMINOLOGY FOR THE PURPOSE OF THIS MANUAL

Cleaning

Cleaning Manual cleaning of devices and device parts with cleaning agent.

Flushing Internal flushing of paint-wetted parts with compressed air.

Operating manual Powder Cup Gun PEM-X1 CG

1 About these Instructions

8 Order number 2326960 | Edition 10/2022

Personnel qualifications

Trained person Is instructed in the tasks assigned to him/her, the potential risks associ-

ated with improper behavior as well as the necessary protective devices

and measures.

Electrically

trained person

Is instructed by an electrician about the tasks assigned to him/her, the

potential risks associated with improper behavior as well as the neces-

sary protective devices and measures.

Electrician Can assess the work assigned to him/her and detect possible hazards

based on his/her technical training, knowledge and experience in rele-

vant provisions.

Skilled person in

the context of

DGUV209‑052

A person who, based on his/her technical training, experience and re-

cent vocational experience, has sufficient technical knowledge in the

area of electrostatic coating and is familiar with the relevant and gener-

ally accepted rules of technology so that he/she can inspect and assess

the status of devices and coating systems based on workplace safety.

Additional requirements for skilled persons can also be found in

TRBS1203(2010/amendment 2012): Expert knowledge in the areas of

protection against excessive pressure, electrical hazards and explosion

protection (where applicable).

Operating manual Powder Cup Gun PEM-X1 CG

2 Using in Accordance with the Instructions

Order number 2326960 | Edition 10/2022 9

2 USING IN ACCORDANCE WITH THE INSTRUCTIONS

2.1 DEVICE TYPE

Powder cup guns for manual coating of grounded work pieces.

2.2 TYPE OF USE

The powder cup gun is designed for the electrostatic coating of work pieces with organic

powders.

WAGNER explicitly prohibits any other use!

The powder cup gun may only be operated in a temperature range from 5–40 °C; 41–104 °F

(FMscope of application 5–45 °C; 41–113 °F).

Electrostatic manual coating systems may only be used in spray areas equipped in

accordance with EN 16985:2018 or under equivalent ventilation conditions.

The device may only be operated under the following conditions:

4Use the device only to work with the materials recommended by WAGNER.

4Do not deactivate safety fixtures.

4Use only WAGNER original spare parts and accessories.

4The operating personnel must be trained on the basis of this operating manual.

4Follow the instructions in the operating manual.

2.3 FOR USE IN POTENTIALLY EXPLOSIVE AREAS

This type A-P electrostatic powder spray gun is suitable for processing industrial powder

lacquers for coating electrically conductive objects and can be used in potentially explosive

areas (zone 22). (see chapter Identification [810]).

In explosion hazard areas, only use approved explosion-proof electrical devices.

2.4 PROCESSIBLE WORKING MATERIALS

– Types of powder which can be charged electrostatically

– Metallic powder

Info

Contact your local WAGNER dealer and the lacquer manufacturer if you encounter

application problems.

2.5 MISUSE

Misuse can lead to physical injury and/or property damage! Special attention must be paid

that:

4No liquid coating products, e.g. solvents or water-based lacquers, are processed.

4No food, medicine or cosmetics are processed.

Operating manual Powder Cup Gun PEM-X1 CG

3 Identification

10 Order number 2326960 | Edition 10/2022

3 IDENTIFICATION

3.1 EXPLOSION PROTECTION IDENTIFICATION

As defined in Directive 2014/34/EU(ATEX), the device is suitable for use in potentially

explosive areas.

Device Type PEM-X1 CG powder cup gun

Manufacturer Wagner International AG

9450 Altstätten

Switzerland

0102 II2D2mJ

CE European Communities

0102 Notified body: PTB

Ex Symbol for explosion protection

II Device class II

2 Category 2

D Ex-atmosphere dust

2mJ Maximum ignition energy 2 mJ

3.2 FM APPROVAL

P_00309

The PEM-X1 CG powder cup gun is FM approved in the USA and Canada using control

document no. 2309729.

3.3 TYPE PLATE

P_03875

PEM-X1 CG Serial Number:

In accordance with control document: 2309729

For Electro. Fin. Appl. CL. II Spray Materials

0102 0518 II 2 D 2mJ

PTB 12 ATEX 5002 / CSAE 21 UKEX 5704 EN 50050-2 / BS EN 50050-2

Output 100kV max.

Ambient Temperature 45 °C

Patents: https://go.wagner-group.com/patents

Made in Switzerland

Wagner International AG, CH-9450 Altstätten

Andere Handbücher für PEM-X1 CG

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere WAGNER Spritzpistole Handbücher

WAGNER

WAGNER CONTROL PRO 250 M Bedienungsanleitung

WAGNER

WAGNER W 670 Bedienungsanleitung

WAGNER

WAGNER TurboRoll Bedienungsanleitung

WAGNER

WAGNER W 660 Bedienungsanleitung

WAGNER

WAGNER Stati-Kit 2000 0292003 Bedienungsanleitung

WAGNER

WAGNER 0552477 Bedienungsanleitung

WAGNER

WAGNER FinishControl 5000 Bedienungsanleitung

WAGNER

WAGNER CONTROL PRO 130 POWER TANK Bedienungsanleitung

WAGNER

WAGNER ProSpray 3.29 Bedienungsanleitung

WAGNER

WAGNER W 90 Montageanleitung

WAGNER

WAGNER PROSPRAY 20 Bedienungsanleitung

WAGNER

WAGNER SF 23 PRO Bedienungsanleitung

WAGNER

WAGNER PEM-X1 Montageanleitung

WAGNER

WAGNER 0558021 Bedienungsanleitung

WAGNER

WAGNER W 180 Kurzanleitung

WAGNER

WAGNER HEAVYCOAT HC750 SSP Bedienungsanleitung

WAGNER

WAGNER GM 5000EAC F Bedienungsanleitung

WAGNER

WAGNER GA 4000ACIC-R Bedienungsanleitung

WAGNER

WAGNER CONTROL SPRAY 250 Bedienungsanleitung

WAGNER

WAGNER Vector Pro Bedienungsanleitung

WAGNER

WAGNER W 95 Benutzerhandbuch

WAGNER

WAGNER CONTROL SPRAY DOUBLE DUTY Bedienungsanleitung

WAGNER

WAGNER CONTROL PRO 250 M Bedienungsanleitung

WAGNER

WAGNER SuperFinish 17ex Bedienungsanleitung

Beliebte Spritzpistole Handbücher anderer Marken

SNOWJOE

SNOWJOE Sunjoe 24V-GS-LTW-RM Bedienungsanleitung

Binks

Binks SV100 Bedienungsanleitung

Fimco

Fimco LG-4-3-1 Bedienungsanleitung

AG SPRAY

AG SPRAY FS-ATV-25BL Bedienungsanleitung

Nordson

Nordson MicroMax 2 Bedienungsanleitung

Bonide

Bonide 051 Bedienungsanleitung

zogics

zogics Z-DAS Bedienungsanleitung

KISANKRAFT

KISANKRAFT KK-KBS-165 Bedienungsanleitung

Matrix

Matrix SG 650 Bedienungsanleitung

Anest Iwata

Anest Iwata SGA-3 Kurzanleitung

paasche

paasche VV Datenblatt

Carlisle

Carlisle DeVilbiss JGA-510 Bedienungsanleitung

Gardena

Gardena 11120 Bedienungsanleitung

wiwa

wiwa 14025 R/F Bedienungsanleitung

Graco

Graco EM 390 Bedienungsanleitung

DeVilbiss

DeVilbiss LUNA2i Bedienungsanleitung

Graco

Graco HydroShield WMBH00 Stücklistenhandbuch

My Clean Buddy

My Clean Buddy PW018 Bedienungsanleitung