WAGNER TOPFINISH GM 1030P Bedienungsanleitung

B_06965

TOPFINISH GM 1030P

Airspray manual gun for at

and round jet nozzles

Version 02/2019

VERSION 02/2019 ORDER NUMBER DOC 2397374 TOPFINISH GM 1030P

Table of Contents

1 ABOUT THESE INSTRUCTIONS 6

1.1 Preface 6

1.2 Warnings, Notices and Symbols in these Instructions 6

1.3 Languages 7

1.4 Abbreviations 7

1.5 Terminology for the Purpose of this Manual 7

2 CORRECT USE 8

2.1 Device Type 8

2.2 Type of Use 8

2.3 For Use in Potentially Explosive Areas 8

2.4 Processible Working Materials 8

2.5 Misuse 8

3 IDENTIFICATION 9

3.1 Explosion Protection Identication 9

3.2 Identication "X" 9

3.3 Type Plate 10

4 BASIC SAFETY INSTRUCTIONS 11

4.1 Safety Instructions for the Operator 11

4.1.1 Electrical Devices and Equipment 11

4.1.2 A Safe Work Environment 11

4.1.3 Personnel Qualications 12

4.2 Safety Instructions for the Personnel 12

4.2.1 Personal Safety Equipment 12

4.2.2 Safe Handling of WAGNER Spray Devices 13

4.2.3 Grounding the Device 13

4.2.4 Product Hoses 14

4.2.5 Cleaning and Flushing 14

4.2.6 Maintenance and Repair 15

4.2.7 Protective and Monitoring Equipment 15

5 DESCRIPTION 16

5.1 Components 16

5.2 Mode of Operation 16

5.3 Standard Equipment 16

5.4 Data 17

5.4.1 Materials of Paint-wetted Parts 17

5.4.2 Technical Data 17

5.4.3 Dimensions and Connections 17

5.4.4 Air Flow 18

VERSION 02/2019 ORDER NUMBER DOC 2397374 TOPFINISH GM 1030P

6 ASSEMBLY AND COMMISSIONING 19

6.1 Training of Assembly/Commissioning Personnel 19

6.2 Storage Conditions 19

6.3 Installation Conditions 20

6.4 Installation and Connection 20

6.4.1 Typical Airspray Spraying System 20

6.4.2 Ventilation of the Spray Booth 20

6.4.3 Air Supply Lines 21

6.4.4 Product Supply Lines 21

6.5 Grounding 21

6.6 Safety Checks 21

6.7 Lacquer Preparations 21

6.8 Commissioning 22

6.8.1 Procedure 22

6.8.2 Verifying a Safe Operational Condition 22

7 OPERATION 23

7.1 Training the Operating Personnel 23

7.2 Tasks 23

7.2.1 Starting to Spray with the Airspray 23

7.3 Adjusting the Spray Pattern 24

7.3.1 Adjusting Spray Pattern 25

7.3.2 Setting the Product Flow Rate 25

7.4 Pressure Relief / Work Interruption 27

7.5 Cleaning the Nozzle and Eliminating Nozzle Clogging 28

8 CLEANING AND MAINTENANCE 29

8.1 Cleaning 29

8.1.1 Safety Instructions 29

8.1.2 Cleaning Personnel 29

8.1.3 Flushing and Cleaning the Spray Gun 29

8.2 Maintenance 30

8.2.1 Maintenance Personnel 30

8.2.2 Safety Instructions 30

8.2.3 Safety Checks and Maintenance Intervals 31

8.2.4 Replacing the Product Hose or Air Hose 32

9 TROUBLESHOOTING AND RECTIFICATION 33

10 REPAIR WORK 34

10.1 Repair Personnel 34

10.2 Repair Notes 34

10.3 Tools 35

10.4 Changing Needle Packings 36

10.5 Changing the Air Valve 37

10.6 Changing Shaping Air Regulator 38

10.7 Changing Shaping Air Regulator 110 39

10.8 Tightening Nozzle Nut 40

10.9 Replacing Nozzle or Needle 41

VERSION 02/2019 ORDER NUMBER DOC 2397374 TOPFINISH GM 1030P

11 FUNCTION TEST 42

12 DISPOSAL 43

13 ACCESSORIES 44

13.1 Air caps 44

13.2 Nozzles and Needles 45

13.3 Nozzles 45

13.4 Hose Sets 46

13.5 Additional Accessories 47

14 SPARE PARTS 48

14.1 How Can Spare Parts Be Ordered? 48

14.2 Spare Parts List Topnish GM 1030P 49

15 EU DECLARATION OF CONFORMITY 50

VERSION 02/2019 ORDER NUMBER DOC 2397374 TOPFINISH GM 1030P

1 ABOUT THESE INSTRUCTIONS

1.1 PREFACE

The operating manual contains information about safely operating, maintaining, cleaning

and repairing the device.

The operating manual is part of the device and must be available to the operating and

service personnel.

The device may only be operated by trained personnel and in compliance with this

operating manual.

Operating and service personnel should be instructed according to the safety instructions.

This equipment can be dangerous if it is not operated according to the instructions in this

operating manual.

1.2 WARNINGS, NOTICES AND SYMBOLS IN THESE INSTRUCTIONS

Warning instructions in this manual highlight particular dangers to users and to the

device and state measures for avoiding the hazard. These warning instructions fall into the

following categories:

DANGER Immediate risk of danger.

Non-observance will result in death or serious injury.

WARNING Potential danger.

Non-observance may result in death or serious injury.

CAUTION Potentially dangerous situation.

Non-observance may result in minor injury.

NOTICE Potentially dangerous situation.

Non-observance may result in damage to property.

Note: Provides information about particular characteristics and

how to proceed.

Explanation of warning notice:

LEVEL OF DANGER

This notice warns you of a danger!

Possible consequences of not observing the warning notice.

The measures for preventing the hazard and its consequences.

VERSION 02/2019 ORDER NUMBER DOC 2397374 TOPFINISH GM 1030P

1.3 LANGUAGES

The operating manual is available in the following languages:

Original operating manual

Language Order no.

German 2397373

Translation of the original operating manual

Language Order no. Language Order no.

English 2397374 Russian 2406532

French 2397375 Chinese 2406533

Italian 2397376

Spanish 2397378

Additional languages on request or at: www.wagner-group.com

1.4 ABBREVIATIONS

Order no. Order number Wrench size

Spare part for low-viscosity (LV) products

Marking in the spare parts lists for high-viscosity (HV) products

Position Low air

Number of pieces Manual gun

1.5 TERMINOLOGY FOR THE PURPOSE OF THIS MANUAL

Cleaning

Cleaning Manual cleaning of devices and device parts with cleaning

agent.

Flushing Internal ushing of paint-wetted parts with ushing agent.

Product pressure

generator

Pump or pressure tank.

Personnel qualications

Trained person Is instructed in the tasks assigned to him/her, the potential risks

associated with improper behavior as well as the necessary

protective devices and measures.

Electrically trained

person

Is instructed by an electrician about the tasks assigned to him/her,

the potential risks associated with improper behavior as well as

the necessary protective devices and measures.

Electrician Can assess the work assigned to him/her and detect possible

hazards based on his/her technical training, knowledge and

experience in relevant provisions.

Skilled person in

accordance with

TRBS 1203

(2010/Revision 2012)

A person who, based on his/her technical training, experience

and recent vocational experience, has sucient technical

knowledge in the areas of explosion protection, protection

from pressure hazards and electric hazards (if applicable) and

is familiar with the relevant and generally accepted rules of

technology so that he/she can inspect and assess the status of

devices and coating systems based on workplace safety.

VERSION 02/2019 ORDER NUMBER DOC 2397374 TOPFINISH GM 1030P

2 CORRECT USE

2.1 DEVICE TYPE

Manual gun for manually coating work pieces.

Topnish GM 1030P

2.2 TYPE OF USE

The spray gun is suitable for atomizing liquid products, particularly coating products,

using the Airspray process:

– Non-ignitable products.

– Ignitable products.

WAGNER explicitly prohibits any other use!

The device may only be operated under the following conditions:

Use the device only to work with the products recommended by WAGNER.

Do not deactivate safety xtures.

Use only WAGNER original spare parts and accessories.

The operating personnel must be trained on the basis of this operating manual.

2.3 FOR USE IN POTENTIALLY EXPLOSIVE AREAS

The device is suitable for use in potentially explosive areas as dened in

Directive 2014/34/EU (ATEX), (see Explosion protection marking Chapter 3.1).

2.4 PROCESSIBLE WORKING MATERIALS

Lacquers and paints, greases, oils and corrosion inhibitor, glue, ceramic glazes, stains.

If you want to spray working materials other than the aforementioned, contact a WAGNER

representative.

Note:

Contact your localWAGNER dealer and the lacquer manufacturer if you encounter application

problems.

2.5 MISUSE

Misuse can lead to physical injury and/or property damage!

Special attention must be paid that:

No dry coating products, e.g., powder are processed.

no food, medicine or cosmetics are processed.

It is important to note that the device's materials are not food-safe.

VERSION 02/2019 ORDER NUMBER DOC 2397374 TOPFINISH GM 1030P

3 IDENTIFICATION

3.1 EXPLOSION PROTECTION IDENTIFICATION

As dened in the Directive 2014/34/EU (ATEX), the device is suitable for use in potentially

explosive areas.

Device type: Airspray manual gun Topnish GM 1030P

Manufacturer: Wagner International AG

CH-9450 Altstätten, Switzerland

II 2G X

CE European Communities

Ex Symbol for explosion protection

II Device class II

2 Category 2 (zone 1)

G Ex-atmosphere gas

X Special notice

3.2 IDENTIFICATION "X"

The maximum surface temperature corresponds to the permissible product temperature.

This and the permissible ambient temperature can be found in Chapter 5.4.2.

Safe Handling of WAGNER Spray Devices

Mechanical sparks can form if the device comes into contact with metal.

In an explosive atmosphere:

knocking or pushing metal against metal is to be avoided;

do not drop the device.

Ignition temperature of the coating product

Ensure that the ignition temperature of the coating product is above the maximum

surface temperature.

Medium supporting atomizing

To atomize the product, use only weakly oxidizing gases, e.g., air.

Cleaning

If there are deposits on the surfaces, the device may form electrostatic charges. Flames or

sparks can form during discharge.

Remove deposits from the surfaces to maintain conductivity.

Use only a damp cloth to clean the device.

VERSION 02/2019 ORDER NUMBER DOC 2397374 TOPFINISH GM 1030P

3.3 TYPE PLATE

B_06966

max. p air

max. p fluid

8 bar (116 psi)

II 2G X

YB-SN: YY-XXXX

GM 1030P

Wagner Int. AG, CH-9450 Altstaetten

Designation

1 Maximum air inlet pressure/product pressure

2 Spray gun model and manufacturer

3 Explosion protection identication and year of manufacture serial number (YB-SN)

Inhaltsverzeichnis

Andere WAGNER Spritzpistole Handbücher

WAGNER

WAGNER FineSpray Bedienungsanleitung

WAGNER

WAGNER PaintREADY Bedienungsanleitung

WAGNER

WAGNER Procoat 9185G Bedienungsanleitung

WAGNER

WAGNER GA 4000ACIC-S Betriebshandbuch

WAGNER

WAGNER WallPerfect Flexio 990 Bedienungsanleitung

WAGNER

WAGNER PEM-T3 Bedienungsanleitung

WAGNER

WAGNER COLORKATALOG GB-2005 Bedienungsanleitung

WAGNER

WAGNER TexPerfect Flexio 525 Bedienungsanleitung

WAGNER

WAGNER W 575 FLEXIO Bedienungsanleitung

WAGNER

WAGNER W 690 Flexio Bedienungsanleitung

WAGNER

WAGNER AC 4500 PROFESSIONAL Kurzanleitung

WAGNER

WAGNER W 95 Bedienungsanleitung

WAGNER

WAGNER LinePainter Bedienungsanleitung

WAGNER

WAGNER PROCOAT MAX Bedienungsanleitung

WAGNER

WAGNER WallPerfect Flexio 995 Bedienungsanleitung

WAGNER

WAGNER Project Sprayer Bedienungsanleitung

WAGNER

WAGNER GM 4600AC Bedienungsanleitung

WAGNER

WAGNER Optimus Bedienungsanleitung

WAGNER

WAGNER POWERPAINTER 90 EXTRA Kurzanleitung

WAGNER

WAGNER W950 Flexio Bedienungsanleitung

WAGNER

WAGNER Power Painter Bedienungsanleitung

WAGNER

WAGNER FLEXiO 570 Bedienungsanleitung

WAGNER

WAGNER Control Stainer 350 Bedienungsanleitung

WAGNER

WAGNER Super Finish 23 Select Bedienungsanleitung

Beliebte Spritzpistole Handbücher anderer Marken

SNOWJOE

SNOWJOE Sunjoe 24V-GS-LTW-RM Bedienungsanleitung

Binks

Binks SV100 Bedienungsanleitung

Fimco

Fimco LG-4-3-1 Bedienungsanleitung

AG SPRAY

AG SPRAY FS-ATV-25BL Bedienungsanleitung

Nordson

Nordson MicroMax 2 Bedienungsanleitung

Bonide

Bonide 051 Bedienungsanleitung

zogics

zogics Z-DAS Bedienungsanleitung

KISANKRAFT

KISANKRAFT KK-KBS-165 Bedienungsanleitung

Matrix

Matrix SG 650 Bedienungsanleitung

Anest Iwata

Anest Iwata SGA-3 Kurzanleitung

paasche

paasche VV Datenblatt

Carlisle

Carlisle DeVilbiss JGA-510 Bedienungsanleitung

Gardena

Gardena 11120 Bedienungsanleitung

wiwa

wiwa 14025 R/F Bedienungsanleitung

Graco

Graco EM 390 Bedienungsanleitung

DeVilbiss

DeVilbiss LUNA2i Bedienungsanleitung

Graco

Graco HydroShield WMBH00 Stücklistenhandbuch

My Clean Buddy

My Clean Buddy PW018 Bedienungsanleitung