Contents TITANUS RACK·SENS®1U
Data: 03/09
TRS_A_Inhalt-en-e
Contents
5.2.5 Connecting the external 24 V supply 7
5.2.6 Connection to mains supply 230 V 8
5.2.7 Circuit diagram TITANUS RACK·SENS®1U for
connecting to a fire alarm panel with potential-free contacts 9
5.2.8 Device “reset” circuit diagram for individual
TITANUS RACK·SENS®1U devices 10
5.2.9 Device “reset” circuit diagram for several
TITANUS RACK·SENS®1U devices 11
5.2.10 Installation and connection of door contact switch 12
5.2.11 Installation and connection of temperature sensors 15
5.2.12 Installation and connection of shutdown module (low power) 17
5.2.13 Installation and connection for device shutdown (high power) 19
5.2.14 Connecting the response indicator to the
TITANUS RACK·SENS®1U 20
6Installation of the Pipe System 6 – 1
6.1 Patented Air Sampling Points 4
6.2 Monitoring in Forced Air Flow Systems
(Ventilation or Climatic Applications) 6
6.2.1 Detection at Air Inlets/Outlets 6
7Commissioning 7 – 1
7.1 Operating TITANUS RACK·SENS®1U 1
7.1.1 Key switch 1
7.1.2 Config. Temp. button 1
7.1.3 Reset and buzzer off button 2
7.1.4 Air flow initialisation 3
7.2 Commissioning TITANUS RACK·SENS®1U 4
7.2.1 Termination of unused inputs 4
7.2.2 Commissioning procedure 5
7.2.3 Settings adjustment with the diagnostics tool 7
7.2.4 Settings for main board and detector module 8
7.2.4.1 Alarm delay setting 9
7.2.4.2 Air flow range setting 9
7.2.4.3 Fault delay setting 10
7.2.4.4 Pre-warning period setting 10
7.2.4.5 Buzzer setting 11
7.2.4.6 Fault indicator setting 11
7.2.4.7 Dynamic air flow setting 11
7.2.4.8 Sensitivity setting (main alarm) 12
7.2.4.9 Pre-alarm threshold setting 12
7.2.4.10 Setting LOGIC·SENS 12
7.2.5 Air flow initialisation setting 13
7.2.5.1 Setting height above Normal Sea Level (NN) 14
7.2.5.2 Setting the current air pressure 14
7.2.5.3 Fan voltage setting 14
7.2.6 Setting the programmable relays and the temperature alarm 15
www.acornfiresecurity.com
www.acornfiresecurity.com
