WALLYS DR5018 Bedienungsanleitung
DR5018
1.IPQ5018 UI settings
2.DR5018 UART configuration
THIS DOCUMENT CONTAINS PROPRIETARY TECHNICAL INFORMATION, WHICH IS THE PROPERTY OF
THE WALLYSTECH AND SHALL NOT BE DISCLOSED TO OTHERS IN WHOLE OR IN PART, REPRODUCED,
COPIED, OR USED AS THE BASIS FOR DESIGN, MANUFACTURING, OR SALE OF APPARATUS WITHOUT
WRITTEN PERMISSION OF WALLYSTECH.
www.wallystech.com 1
Wallys | User Manual | DR5018
IPQ5018 UI setting
• IP Setting: setting IP in the path "network->Interfaces->LAN-
>IPV4 address"
• DHCP setting:DHCP and other protocol setting in the path
network-> Interfaces-> LAN->protocol”
1.Input the IP 192.168.1.1 and login
2.Input the username “admin” password
“password” then press the button “Login”
3. Network setting
www.wallystech.com 2
Wallys | User Manual | DR5018
IPQ5018 UI setting
login the path network->Interfaces->WIFI, then choose one
wifi,we select
the red marked as example,click the button ‘Edit’
4. Wireless setting
www.wallystech.com 3
Wallys | User Manual | DR5018
IPQ5018 UI setting
The detail information show in the picture as below:
• Channel:for channel select;
• Transmit Power:signal chain power setting; ESSID:for ID
• Mode:it support 4 mode AP,AP(WDS),client,client(WDS)
Wireless
• Security: for Encryption setting
www.wallystech.com 4
Wallys | User Manual | DR5018
IPQ5018 UI setting
In advance setting you can select which chain do you
need,which BW do you need and so on
In the end, you need click the button “Save & Apply”, and wait
for 2 minutes, then you can enjoy it.
www.wallystech.com 5
Wallys | User Manual | DR5018
IPQ5018 UI setting
Login System->Backup/Flash Firmware;
Then click the button “Generate archive”
Then download the archive
5. Backup archive
www.wallystech.com 6
Wallys | User Manual | DR5018
IPQ5018 UI setting
Login System->Backup/Flash Firmware;
Then click the button “ flash image”
Then click the button “Proceed” warning don't power off wait for
about three minutes
Then the system will reboot automatic.
Then login again,you can enjoy it.
6.Update new image
www.wallystech.com 7
Wallys | User Manual | DR5018
IPQ5018 UI setting
Login System->Network/wifi/Edit->Choose 5G radio
Country Coad choose “ US ” click the button“Wireless Security”
Then choose “WPA3” and set password
Notice:SAE/SAE PWE/SAE MFP click “ √ ”
7. wireless encryption
www.wallystech.com 8
Wallys | User Manual | DR5018
IPQ5018 UI setting
7. wireless encryption
www.wallystech.com 9
Wallys | User Manual | DR5018
DR5018 UART configuration
The photo below shows how to use the Uart for DR5018
1. Introduction
Inhaltsverzeichnis
Andere WALLYS Computerhardware Handbücher
Beliebte Computerhardware Handbücher anderer Marken
EMC2
EMC2 VNX Series Betriebsanleitung
Panasonic
Panasonic DV0PM20105 Bedienungsanleitung
Mitsubishi Electric
Mitsubishi Electric Q81BD-J61BT11 Bedienungsanleitung
Gigabyte
Gigabyte B660M DS3H AX DDR4 Bedienungsanleitung
Raidon
Raidon iT2300 Bedienungsanleitung
National Instruments
National Instruments PXI-8186 Bedienungsanleitung
