WAREMA Comfort Timer Merkblatt
WAREMA Controls
WAREMA Comfort Timer
Operating and installation instructions
(Keep for future use)
Valid from 1st December 2011
890202_b
General Information
General Information
The publication of this catalogue super-
sedes all previous corresponding docu-
mentation. We reserve the right to make
alterations in the interest of technical
progress. Considerable care was taken
in producing the text and graphics in this
documentation. No liability is accepted
for any errors which may nevertheless
exist in this documentation, nor for
the consequences of any such errors.
Safety information
For detailed information, please refer to
the relevant user or installation instruc-
tions.
Head office
WAREMA Renkhoff SE
Hans-Wilhelm-Renkhoff-Strasse 2
D-97828 Marktheidenfeld/Main, Germany
Postfach 13 55
D-97822 Marktheidenfeld/Main, Germany
Phone: +49 (0)9391/20-0
Fax: +49 (0)9391/20-4299
http://www.warema.de
Customer Center
Control systems
Export department
Phone: +49 (0)9391/20-3740;
Fax: +49 (0)9391/20-3749
Hotline Control Systems
Phone: +49 (0)9391/20-6760;
Fax: +49 (0)9391/20-6769
Imprint
WAREMA Renkhoff SE
Hans-Wilhelm-Renkhoff-Strasse 2
D-97828 Marktheidenfeld/Main, Germany
WAREMA and the WAREMA logo are trade marks of WAREMA Renkhoff SE.
All other brand or product names included in this document are trade marks or regis-
tered trade marks of their respective owners.
© 2007, WAREMA Renkhoff SE
3
890202_b•en•16.11.2011 We reserve the right to carry out improvements
Contents
General .....................................................................................................4
Safety information ...................................................................................5
Installation ................................................................................................9
Disassembly...........................................................................................14
Operation in display mode..................................................................17
Notes on operation / display ..............................................................18
Explantion of symbols..........................................................................19
Programming ........................................................................................ 21
Setting the time / date ........................................................................ 22
Setting the product .............................................................................. 23
Train ........................................................................................................ 25
Time switch control.............................................................................. 26
Dawn/dusk control ...............................................................................31
Software version/factory settings...................................................... 37
Maintenance and cleaning................................................................. 38
Liability ................................................................................................... 38
Disposal................................................................................................. 38
Technical data ...................................................................................... 39
User information................................................................................... 40
Troubleshooting.....................................................................................41
Appendix................................................................................................ 44
Notes .......................................................................................................47
4890202_b•en•16.11.2011
We reserve the right to carry out improvements
General
Thank you for purchasing the WAREMA Comfort Timer!
The WAREMA Comfort Timer is a time switch with floating out-
put designed specifically for actuating sun protection blinds, in
particular roller shutters as well as external and internal venetian
blinds. These can be actuated automatically using an integrated
time switch control. Equipment features:
• Floating output
• Freely programmable weekly timer
• Random operation
• Dawn/dusk control using a dawn/dusk sensor or astro pro-
gram
• Automatic conversion between summer/winter time
• Integrated EWFS receiver
Carry out the following steps in the sequence given to ensure
problem-free operation:
• Pleasereadtheseinstructionscarefully
• Onceyouhavereadtheinstructions,installthedeviceand
connect the power supply
• ProgramtheWAREMAComfortTimer
• TrainthetransmitterintheWAREMAComfortTimer
• Checkthatthesystemisfunctioningcorrectly
Package contents:
•WAREMA Comfort Timer (consisting of power unit and control
panel)
•Transport protection
•Operating and installation instructions
5
890202_b•en•16.11.2011 We reserve the right to carry out improvements
Safety information
We have developed and tested the WAREMA Comfort Timer fol-
lowing the fundamental safety requirements.
Nonetheless, some risks remain!
For this reason, please read these instructions before setting up
and operating the control!
Keep these instructions for future use!
The safety information in these instructions are marked with warn-
ing symbols. Depending on the respective danger potential, they
have the following hierarchic structure:
DANGER
warns of an immediately threatening dangerous situ-
ation. Possible consequences may include serious
injuries and even death (personal injury), property or
environmental damage.
WARNING
warns of a possibly dangerous situation. Possible
consequences may include light or serious injuries
and even death (personal injury), property or envi-
ronmental damage.
CAUTION
Reminder to be careful.
Possible consequences of negligence may include
property damages.
The following pictograms and symbols may have been
affixed to the control unit itself or to the connected de-
vices alerting you to potential dangers:
6890202_b•en•16.11.2011
We reserve the right to carry out improvements
Safety information
WARNING
against dangerous electrical currents!
CAUTION
Components endangered by electrostatic charges!
Intended use
Warning
It is important to comply with these instructions in the
interest of personal safety. Incorrect installation may
lead to serious injury!
The device has been developed to control sun protection devices
and is intended for interior installation.
The approval of the manufacturer must be obtained
for uses outside of the purposes listed here! The con-
sequences of unintended use may include personal
injuries of the user or of third parties as well as prop-
erty damages to the control itself, to connected devic-
es or moveable mechanical parts of the entire system.
Therefore use our product only as intended!
Target group
These instructions are intended for persons installing the WARE-
MA Comfort Timer including all necessary components and for
persons operating, programming or setting up the control.
7
890202_b•en•16.11.2011 We reserve the right to carry out improvements
Safety information
WARNING
Mounting, connection, set-up or operation by persons
who are not sufficiently qualified and informed can
cause severe damage to the system or even damage
to persons!
Installation and commissioning may therefore only be performed
by properly trained qualified technicians! These technicians must
be able to recognize dangers that may be caused by the me-
chanical, electrical or electronic equipment!
Persons installing or connecting the control must know and have
understood the content of these instructions.
Retrofitting and modifications
The WAREMA Comfort Timer has been safely designed and
constructed by our company. All required settings are made
at initial commissioning. Modification of the unit parameters is
only required if the characteristics of the control unit need to be
adjusted, something is changed in the sensor equipment, or the
control unit itself is replaced.
WARNING
Retrofitting and modifications may impact the safety
of the system or reduce its effectiveness! Possible
consequences may include death, serious or light in-
juries, property or environmental damages.
Contact us or your specialist dealer therefore before retrofitting or
changing the system or the unit parameters if you cannot find any
information on the corresponding topic in the control unit docu-
mentation. This is the only way to ensure trouble-free retrofitting/
modification.
8890202_b•en•16.11.2011
We reserve the right to carry out improvements
Safety information
Safe working
Whenever you intend to carry out work on motor-operated win-
dows or building facades on which motor-operated sun protection
products are installed, carry out the following steps first:
Switch the system to a de-energized state first of all!
Make sure that the system has been sufficiently secured against
unauthorized or unintentional reactivation!
In any case, use suitable safety devices for personal protection!
Never place or store any items in the motion area of automatically
operated mechanisms (e.g. ladder to the house wall with articu-
lated arm awning)!
WARNING
Danger conditions, malfunctions and property dam-
age to the system are possible due to improperly
executed mounting, connection, repair or mainte-
nance work!
Such work may only be carried out by the service de-
partment or by authorized qualified personnel!
Only use such spare/replacement parts for maintenance
or repair work that have been approved by the manufac-
turer of the system.
WARNING
Dangerous situations, malfunctions and property
damages to the unit are possible by cutting connec-
tions during operation! All connection are required
for proper operation of the control unit.
9
890202_b•en•16.11.2011 We reserve the right to carry out improvements
Safety information
Therefore switch off the entire system before attaching
or detaching connecting lines!
WARNING
Danger to life and property damage through sudden
movement of the mechanism!
Installation
Follow the points below in the order given:
• Firstdeterminewheretheindividualcomponentsaretobe
mounted. Use the instructions given in this chapter to do this.
• Thendeterminewhichcablesarerequiredtoconnectthe
components with one another. To do this, please refer to the
"Wiring diagrams" chapter. Lay the relevant lines. Do not use
lines of a larger size than specified. It is advisable to use con-
duits when laying the motor line.
• Mountandwiretheindividualcomponents.
• Checkthewiringbeforeswitchingonthepowersupplyto
the control.
• Thencommissiontheunit.Thecontrolwillnowbereadyto
use. The steps required for commissioning are explained in
detail in the Commissioning chapter.
• Checkthecorrectrunningdirectionofthesunprotectionby
pressing the "Up" and "Down" buttons on the control.
• Thenadjustthefunctioningofthesystemtotheambientcon-
ditions and special requirements.
Caution
Electrical equipment must be mounted to ensure ease
of access (VDE 0100)!
10 890202_b•en•16.11.2011
We reserve the right to carry out improvements
Installation
For flush mounting, the WAREMA Comfort Timer requires rough-
ly the same area as a wall-mounted switch and a deep flush-fit-
ted wall box. The dimensions can be found in figure 6. The con-
trol may only be fitted in interior areas, in dry and easily accessi-
ble locations. Choose a mounting position so that...
• TheWAREMAComfortTimercanbeoperatedergonomically
at all times
• Therearenostrongheatsources(e.g.radiators,chimney
walls) in the vicinity.
• Avoidanypositionwheredirectsunlightwillshineontothe
device as this can affect the legibility of the display.
• Workthroughthepointsgivenbelowintheordergiven,not-
ing the following diagrams:
Handling the spring terminals:
Fig. 1 Connecting and disconnecting the line connections
After removing the insulation on the wires, these are pressed into
the terminal (1), until the insulation on the wires enters the termi-
nal and the line is securely held in the terminal (2). To disconnect
the line, the relevant unlock button needs to be pressed in using
a screwdriver as far as it will go, and the line then removed from
the terminal (3).
Inhaltsverzeichnis
Andere WAREMA Timer Handbücher
