WatchDog 3619WD Bedienungsanleitung

B-Series Loggers &

Docking Stations

PRODUCT MANUAL

Item # 3619WD, 3620WD, 3621WD, 3655K, 3655K1

CONTENTS

For customer support, or to place an order, call Spectrum

Technologies at (800)248-8873 or (815)436-4440 between

7:30 am and 5:30 p.m. CST, FAX at (815)436-4460, or E-mail

at info@specmeters.com.

Spectrum Technologies, Inc

12360 S Industrial Dr. East

Plainfield, IL 60585

www.specmeters.com

Model Specifications 3

Docking Station 4

SpecWare Software 6

Trouble Shooting 7

Warranty 8

CE Declaration of Conformity 8

Item # Internal

Sensors Intervals

Model B102 T/RH

Item 3621WD

Temp Range: -4 to -185 ºF Temperature

(-20 - 85 ºC) Relative Humidity 4000

Temp Accuracy:±1.1ºF from 5 to 149ºF

(± 0.6ºC from -15 to 65ºC)

Humidity: 0 to 100%, ±5%

Model B101 8K

Item 3620WD

Range: -40 to -185 ºF (-40 to 85 ºC) Temperature 8000

Accuracy:±1.1ºF from 5 to 149ºF

(± 0.6ºC from -15 to 65ºC)

Model 100 2K*

Item 3619WD

Range: -40 to -185 ºF (-40 to 85 ºC) Temperature 2000

Accuracy:±1.8ºF from -22 to 158ºF

(± 1.0ºC from -30 to 70ºC)___

Model specifications

*Use included plastic bag when measuring soil temperature

Button Loggers are NOT “waterproof” they are rated

IP65, meaning water can be sprayed or splashed up-

on it, but it cannot be immersed.

Continuous contact with water through immersion

or by burying in soil will degrade the seal and may

result in product failure. The enclosed plastic enve-

lopes with the loggers can be used to protect the

loggers if you are measuring temperatures. Enve-

lopes should not be used if also measuring RH.

Please remember to periodically check button log-

gers after installation. Loggers buried in plastic en-

velopes may deteriorate over time .

B-Series Loggers

Docking Stations

There are two types of docking stations that can be

used with your B-Series Loggers see chart below.

The Docking Station is used to connect the WatchDog B

-Series (Models B102 T/RH, B101 8K, 100 2K) Data

Loggers to a PC. This manual will aid you in using your

docking station. Read it thoroughly to insure proper and

effective use.

Connecting the docking station to the PC

3655K Serial

The 3655K docking station has a serial port interface.

To connect to a PC that does not have a serial port, you

will need to purchase a USB to serial adapter (item

3661USB). This item requires SpecWare 6.0 or greater.

3655K1 USB

The 3655K1 docking station has a USB interface.

Before connecting to a PC for the first time, the USB

driver must be installed. This is done by either installing

or updating SpecWare Basic or Pro v9.1 or higher.

Previous builds of SpecWare 9 can be updated via free

downloads available at www.specmeters.com. The

software version can be checked by selecting “About

SpecWare” from the Help menu.

Model Connection Type Software Needed

3655K 9-Pin Serial SpecWare 6.0 or greater

3655K1 USB SpecWare Basic or Pro

v9.1

Connecting the logger to the docking station

The WatchDog B-Series data loggers simply snap onto

the docking station as shown in the photo below. While

attached to the docking station, the logger may be read

and/or relaunched using SpecWare software.

The docking station has two blue buttons/docks. Either

may be used with your data loggers (do not however

use both simultaneously).

Removing logger from the docking station

Grab the data logger on two sides and pull up on a slight

angle (as pictured below). Do not grab the corner of the

backing and pull as the severe bending that results may

separate the backing from the logger.

SpecWare Software

Complete details on the software are included in the

SpecWare Software manual which is available as a .pdf

document on the installation CD (and accessible via the

Help menu). The following sections summarize the most

commonly used functions.

Launching the Loggers

The “Launch Options” screen is used to config-

ure the logger and activate it so it can collect

data. The launch screen can be accessed

through the WatchDog Manager or by clicking

the “Launch a Button Logger” toolbar button.

Set the data collection interval ranging from 1 to 120

minutes and ensure all channels are enabled. The Delay

Start option allows you to start logging data at a later

time.

If the “Wrap around when full" box is checked, when the

logger reaches its maximum data capacity, each new

data record will overwrite the oldest. If the “Wrap around

when full” box is NOT checked the logger will simply

stop recording data once the maximum capacity has

been reached. Click the “OK” button to launch the log-

ger.

Downloading the Loggers

Use either the WatchDog Manager or the “Get data from

a Button logger, Shuttl” toolbar button to save

the logger data. When the download is com-

plete , a dialog box will appear indicating the

readout and translation complete. All new log-

gers require you to create a new Logger Loca-

tion the first time the logger is read out.

IMPORTANT: Until the logger is re-launched, the data

remains on the logger and can be downloaded again.

Once data has been downloaded, you must re-launch

the logger to continue making measurements. Clicking

the Start in the “Launch Options” screen erases any

previously recorded data from the logger

Trouble Shooting

Commonly asked questions include:

Q. Why does my button display the following message

“Unable to connect one wire exception 1-wire not

available?

A. Owapi.dll needs to be registered, go to Windows

Start, Run and type “Regsvr32

C:WINDOWSsystem32owapi.dll then click OK.

Q. What does it mean if I received the following mes-

sage “Unable to access the button logger interface.

This is probably due to Java not being installed on

this computer?”

A. You need to check your C:\SpecWare folder for

msjavx86.exe and double click it to run it. If it is not

there then you need to install the Java Library from

our website, www.specmeters.com. Go to Support,

Software Updates, USB Software and Driver Up-

dates and download Java Library Build 0133 or use

this link: http://www.maximintegrated.com/products/

ibutton/software/tmex/download_drivers.cfm

This equipment has been manufactured for

Spectrum Technologies, Inc.

12360 S. Industrial Dr. East

Plainfield, IL 60585 USA

The Manufacturer’s DECLARATION OF CONFORMITY is on file at the above

address, and certifies conformity to the following:

Model Number: 3619WD, 3620WD, 3621WD, 3655K, 3655K1

Description: WatchDog B-Series Loggers & Docking Station

Type: Electrical Equipment for Measurement, Control, and Laboratory Use

Directive: 89/336/EEC 2004/108/EC

Standards: EN 55022:1998+A1:2000+A2:2003 Class B

EN 55024:1998+A1:2001+A2:2003

EN 50082-1:1997 (IEC 801.2, 801.3, 801.4)

EN 61000-3-2:2000+A2:2005 Class A

EN 61000-3-3:1995+A1:2001

Warranty

This product is warranted to be free from defects in material

or workmanship for one year from the date of purchase.

During the warranty period Spectrum will, at its option, ei-

ther repair or replace products that prove to be defective.

This warranty does not cover damage due to improper in-

stallation or use, lightning, negligence, accident, or unau-

thorized modifications, or to incidental or consequential

damages beyond the Spectrum product. Before returning a

failed unit, you must obtain a Returned Materials Authoriza-

tion (RMA) from Spectrum. Spectrum is not responsible for

any package that is returned without a valid RMA number

or for the loss of the package by any shipping company.

3600 Thayer Court

Aurora, IL 60504

(800) 248-8873 or (815) 436-4440

Fax (815) 436-4460

E-Mail: info@specmeters.com

www.specmeters.com

Rev 08/15

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere WatchDog Dockingstation Handbücher

WatchDog

WatchDog B-Series Bedienungsanleitung

Beliebte Dockingstation Handbücher anderer Marken

Sony

Sony Dream Machine XDR-DS12iP Bedienungsanleitung

Acer

Acer USB Type-C Dock II Bedienungsanleitung

ATEN

ATEN UC-2000 Bedienungsanleitung

Xcellon

Xcellon HDD-202 Bedienungsanleitung

Dok

Dok CR09 Bedienungsanleitung

Philips

Philips BTM630/12 Bedienungsanleitung

IOGear

IOGear Travel Pro GUD3C09 Bedienungsanleitung

RKI

RKI SDM-E2 Bedienungsanleitung

iHome

iHome iP15 Bedienungsanleitung

VITURE ONE

VITURE ONE MOBILE DOCK Bedienungsanleitung

Lindy

Lindy 42984 Bedienungsanleitung

CipherLab

CipherLab 8001 Bedienungsanleitung

Pyle

Pyle PIPDSP2 Bedienungsanleitung

Avol

Avol AS2350 Bedienungsanleitung

Datalogic

Datalogic JoyaTouch Bedienungsanleitung

Philips

Philips DC190/79 Bedienungsanleitung

Targus

Targus DOCK315EUZ Bedienungsanleitung

Akasa

Akasa DuoDockX3 AK-DK08U3-BK Bedienungsanleitung