Watchguard Firebox T40 Montageanleitung
01.11.22, 13:59
Firebox T40/T40-W Hardware Guide
https://www.watchguard.com/help/docs/help-center/en-US/Content/en-US/Hardware-Guides/firebox-t40-hardware-guide.html?cshid=10001
1/18
01.11.22, 13:59
Firebox T40/T40-W Hardware Guide
https://www.watchguard.com/help/docs/help-center/en-US/Content/en-US/Hardware-Guides/firebox-t40-hardware-guide.html?cshid=10001
2/18
Firebox T40/T40-W Hardware Guide
WatchGuard® Firebox security appliances deliver unparalleled unified threat management, superior
performance, ease of use, and value for your small organization or branch office. Our security
subscriptions give you fully integrated protection from spyware, spam, viruses, worms, trojans, web-
based exploits, and blended threats. From firewall and VPN protection to secure remote access,
WatchGuard Firebox appliances support a broad range of network environments.
This guide introduces the Firebox T40 RoHS-compliant (lead-free) hardware product. The Firebox T40
network security appliance is designed for small organizations and branch offices.
Fireware OS
The Firebox T40 supports WatchGuard’s next generation UTM OS—Fireware® OS. Each Firebox
appliance includes Fireware OS and delivers exceptional protection against today's sophisticated
threats to make sure that your business stays connected. For more information on the features of
Fireware OS, see Fireware Help.
About Your Hardware
Hardware Specifications
Processor NXP LS1043A, 1.0GHz, 4-Core
Memory DDR4 4GB
Storage mSATA 16GB
Power Supply Input Ratings: 100-240V AC, MAX 1.2A, 50-60Hz
Output: 54V DC
Dimensions D = 205.5 mm (8")
W = 217 mm (8.5")
H = 43 mm(1.7")
Weight T40: 0.88 kg(1.94 lbs)
T40–W: 0.9 kg (1.98 lbs)
Interface Specifications
Network Interfaces 5 RJ45 connectors, 1000Base-TX (10/100/1000Mbps)
Interface 4 supports PoE+ (Power over Ethernet), compliant with the
IEEE 802.3at standard
Radio Type and
Frequency Band
(T40–W)
A single 3x3:3 radio that can operate on one of these bands:
2.4 GHz 802.11 b/g/n
5 GHz 802.11 a/n/ac
I/O Interfaces 2x USB3.0, Type-A
1 RJ45 Serial Port
01.11.22, 13:59
Firebox T40/T40-W Hardware Guide
https://www.watchguard.com/help/docs/help-center/en-US/Content/en-US/Hardware-Guides/firebox-t40-hardware-guide.html?cshid=10001
3/18
Environmental Requirements
To safely install your Firebox, we recommend that you:
Install it indoors.
Put it in a secure area, such as a locked room, to block the device from people who do not have
permission to use it.
Connect it to a conditioned power supply to prevent damage from sudden power changes.
Other environmental requirements:
Operating temperature: 0° to 40°C (32° to 104°F)
Operating humidity: 5% to 90% non-condensing
Non-operating temperature: –25° to 75°C (-13° to 167°F)
Non-operating humidity: 0% to 95% non-condensing
01.11.22, 13:59
Firebox T40/T40-W Hardware Guide
https://www.watchguard.com/help/docs/help-center/en-US/Content/en-US/Hardware-Guides/firebox-t40-hardware-guide.html?cshid=10001
4/18
Hardware Description
Front
Front view of the Firebox:
Failover
The Failover indicator is lit when there is a WAN failover from the primary external interface to
the backup interface. After the external interface connection fails back to the primary external
interface, the indicator is not lit.
WAP
On the Firebox T40-W model, the WAP indicator is lit when the appliance is activated as a
wireless access point or a wireless client. The color indicates the active wireless radio band. The
light blinks when data is sent and received. The speed of the blink increases as the data flow
increases.
WAP Yellow 2.4 GHz radio band
Green 5 GHz radio band
Indicator Indicator Color Wireless Band
01.11.22, 13:59
Firebox T40/T40-W Hardware Guide
https://www.watchguard.com/help/docs/help-center/en-US/Content/en-US/Hardware-Guides/firebox-t40-hardware-guide.html?cshid=10001
5/18
Network Interface Status Indicators
The Firebox T40 has five network interfaces. There are two status indicators for each interface.
1000
Yellow
On Link speed: 1000 Mbps
Blinks (speed of blink increases as the data flow
increases)
Data sent and received
10/100
Green
On Link speed: 10 Mbps or 100
Mbps
Blinks (speed of blink increases as the data flow
increases)
Data sent and received
Status
The Status indicator is lit when there is a management connection to the device. The Status
indicator is lit for 30 seconds after you connect to the device with the Fireware Web UI or the
command line interface. It is also lit when the device is polled by WatchGuard System Manager.
Mode
The Mode indicator shows the status of the external network connection. If the device can
connect to the external network and send traffic, the indicator is green. The indicator flashes if
the device cannot send traffic to the external network.
Attn
The Attn indicator is yellow when you start the device with the Reset button pressed. For more
information, see Restore Factory-Default Settings.
Power ( )
The Power indicator is lit to indicate power status. It is green when the Firebox is powered on.
Indicator Indicator Color Interface Status
01.11.22, 13:59
Firebox T40/T40-W Hardware Guide
https://www.watchguard.com/help/docs/help-center/en-US/Content/en-US/Hardware-Guides/firebox-t40-hardware-guide.html?cshid=10001
6/18
Rear
Rear view of the Firebox:
Serial Port (Console)
The leftmost port is an RJ45 serial console port. An RJ45 serial cable is not included with the
device.
USB Interfaces
The device includes two USB 3.0 interfaces. Connect a USB storage device for USB backup and
restore, or to store a support snapshot. For more information, see Fireware Help.
Network Interfaces
The Ethernet interfaces have standard RJ45 connectors and support link speeds of 10, 100, or
1000 Mbps.
The Firebox T40 has five network interfaces. These interfaces are labeled 0/WAN, 1/LAN, 2, 3, 4-
PoE. Interface 4 is a PoE+ (Power over Ethernet) interface, compliant with the IEEE 802.3at
standard.
Interfaces 1 to 4 only support full duplex connections. Make sure the Firebox
interfaces and network devices you connect to these ports are set to auto-
negotiation or full duplex. Interface 0 supports both half and full duplex
connections.
Reset Button
This resets the device. To restore the device to factory-default settings, see Restore Factory-
Default Settings.
Power Switch
Controls the power supplied to the device. Move the switch to position 1 to power on the
device, or position 0 to power it off.
Power Input
An AC power adapter is included with your device. Connect the AC adapter to the device and to
a power source. Use only the supplied AC power adapter.
The red glow seen on the cover of some Firebox T40 devices is the LED on the
memory card inside the unit. For more information, see this KB article.
01.11.22, 13:59
Firebox T40/T40-W Hardware Guide
https://www.watchguard.com/help/docs/help-center/en-US/Content/en-US/Hardware-Guides/firebox-t40-hardware-guide.html?cshid=10001
7/18
AC Power Adapter
The AC power adapter supplies power for the Firebox. Before you connect the adapter, verify that the
color band on the cord matches the color ring around the power plug on the Firebox.
The Firebox T40 includes a power cable to connect to the AC power adapter.
The suffix on the Firebox SKU indicates the type of power plug included with the device. Note that the
suffix is not restrictive – for instance, though tagged as “AU” for Australia, the Type I plug is also used
in China, New Zealand, and Argentina. If your country does not use one of these four plugs, use an
adapter with one of these plugs.
-US A US, Canada, Japan, Taiwan, Central America,
Some countries in South America, Philippines
-UK G United Kingdom, Ireland, Hong Kong, Singapore,
Malaysia, some African countries
-EU C Europe, Middle East, Korea, Indonesia, some
African countries
-AU I China, Australia, New Zealand
Wall Mounting Plate
The wall mounting plate (available separately) enables you to mount the Firebox on a wall in a good
location to increase the wireless range.
You need four screws 1/8" (3 mm) wide and at least 3/4" (18 mm) long to install the mounting plate.
To install the wall mounting plate:
1. Place the wall mounting plate horizontally against the wall where you want to install the
Firebox.
2. Securely screw the wall mounting plate to the wall with the four screws.
3. Align the two holes on the bottom of the Firebox with the two connection points on the
mounting plate.
4. Push the Firebox toward the mounting plate, until the two connection points on the
mounting plate are inside the holes on the bottom of the Firebox. Then press firmly down to
seat the device on the plate.
SKUSuffix
Plug
Type Used in regions Photo
01.11.22, 13:59
Firebox T40/T40-W Hardware Guide
https://www.watchguard.com/help/docs/help-center/en-US/Content/en-US/Hardware-Guides/firebox-t40-hardware-guide.html?cshid=10001
8/18
To remove the Firebox from the mounting plate, push the Firebox up slightly, and then pull out, to
separate the connection points on the mounting plate from the holes on the bottom of the Firebox.
Restore Factory-Default Settings
If you have a problem in your configuration file that you cannot correct, you can restore the factory-
default settings and start from a new configuration file. For example, if you do not know the
administrator account passphrase, or if a power interruption causes damage to the Fireware OS, you
can restore the Firebox to the factory-default settings and build your configuration again.
To reset the Firebox to factory-default settings:
1. Power off the Firebox.
2. Press and hold the Reset button on the back of the Firebox.
3. Power on the Firebox while you continue to hold the Reset button.
4. Continue to hold the Reset button until the Attn indicator on the front of the Firebox begins
to flash.
5. Release the Reset button.
6. Wait until the Attn indicator stays lit and does not flash.
7. Power off the Firebox.
8. Power on the Firebox.
The Firebox restarts with factory-default settings.
01.11.22, 13:59
Firebox T40/T40-W Hardware Guide
https://www.watchguard.com/help/docs/help-center/en-US/Content/en-US/Hardware-Guides/firebox-t40-hardware-guide.html?cshid=10001
9/18
Notices
All WatchGuard products are designed and tested to meet strict safety requirements. These
requirements include product safety approvals and other global compliance standards. Please read
the following instructions carefully before operating the product, and refer to them as needed to
ensure the continued safe operation of your product.
Product Safety Certification
The WatchGuard product is safety certified under the following standards:
CAN/CSA C22.2 No.60950-1-07, Second Edition 2014-10
UL 60950-1, Second Edition 2014-10-14
IEC 60950-1, 2005+A1:2009+A2:2013
IEC 62368-1: 2014 2nd edition
EN 60950-1:2006+A11:2009+A1:2010+A12:2011+A2:2013
Safety Warning
Do not place objects on the power cord.
Do not obstruct the ventilation openings. These openings prevent overheating of the machine.
Never push objects of any kind into slots or openings on this equipment. Making a contact with
a voltage point or shorting out a part may result in fire or electrical shock.
When removing or installing an appliance, follow the general installation safety instructions.
You must disconnect the AC power cord from the Firebox before you remove the cover of the
Firebox for any reason.
There is risk of explosion if the battery is replaced by an incorrect type. Dispose of used
batteries according to the manufacturer’s instructions.
警示 本電池如果更換不正確會有爆炸的危險，請勿自行更換電池
Disclaimer
WatchGuard shall not be held liable if the end user alters, modifies, or repairs any WatchGuard
hardware appliance.
Hinweise Zur Sicherheit
Alle WatchGuard Produkte werden entwickelt und getestet, um strenge Sicherheitsanforderungen zu
erfüllen. Diese Anforderungen umfassen Produktsicherheit Zulassungen und andere globale
Compliance-Standards. Bitte lesen Sie die folgenden Anweisungen sorgfältig, bevor Sie das Produkt,
und bezeichnen sie als notwendig, um den sicheren Betrieb des Geräts zu gewährleisten. Weitere
Informationen finden Sie in der elektronischen Hardware Guide.
Die WatchGuard Produkt ist Sicherheit unter den folgenden Normen zertifiziert
CAN/CSA C22.2 No.60950-1-07, Second Edition 2014-10
UL 60950-1, Second Edition 2014-10-14
IEC 60950-1:2005+A1:2009+A2:2013
IEC 62368-1: 2014 2nd edition
EN 60950-1:2006+A11:2009+A1:2010+A12:2011+A2:2013
Sicherheitshinweis
Legen Sie keine Gegenstände auf das Netzkabel.
01.11.22, 13:59
Firebox T40/T40-W Hardware Guide
https://www.watchguard.com/help/docs/help-center/en-US/Content/en-US/Hardware-Guides/firebox-t40-hardware-guide.html?cshid=10001
10/18
Verdecken Sie nicht die Lüftungsöffnungen. Diese Öffnungen verhindern eine Überhitzung der
Maschine.
Stecken Sie niemals Gegenstände jeglicher Art in die Schlitze oder Öffnungen des Geräts
stecken. Der Kontakt mit einem spannungsführenden Punkt oder das Kurzschließen eines
Bauteils kann zu einem Brand oder elektrischen Schlag führen.
Beim Entfernen oder Installieren eines Gerätes, nach den allgemeinen Installation
Sicherheitshinweise.
Aviso De Seguridad
Todos los productos WatchGuard están diseñados y probados para satisfacer estrictos requisitos de
seguridad. Estos requisitos incluyen la homologación de productos de seguridad y otras normas de
cumplimiento global. Por favor, lea atentamente las siguientes instrucciones antes de utilizar el
producto, y se refieren a ellos como sea necesario para garantizar el funcionamiento seguro y
continuo de su producto. Información adicional se puede encontrar en la Guía del usuario
electrónica.
Certificación de seguridad del producto
El producto tiene certificación de seguridad WatchGuard bajo las siguientes normas:
CAN/CSA C22.2 No.60950-1-07, Second Edition 2014-10
UL 60950-1, Second Edition 2014-10-14
IEC 60950-1:2005+A1:2009+A2:2013
IEC 62368-1: 2014 2nd edition
EN 60950-1:2006+A11:2009+A1:2010+A12:2011+A2:2013
Advertencia de seguridad
No coloque objetos sobre el cable de alimentación.
No obstruya las aberturas de ventilación. Estas aberturas evitan el sobrecalentamiento de la
máquina.
Nunca introduzca objetos de ningún tipo en las ranuras o aberturas del equipo. El contacto con
puntos de voltaje o el cortocircuito de una pieza podría provocar un incendio o una descarga
eléctrica.
Al extraer o instalar un electrodoméstico, siga las instrucciones generales de instalación de
seguridad.
Federal Communications Commission Interference Statement
Operations in the 5.15-5.25GHz band are restricted to indoor usage only. This equipment has been
tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio frequency energy and,
if not installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one of the following measures:
Reorient or relocate the device.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate this equipment.
Andere Handbücher für Firebox T40
1
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere Watchguard Firewall Handbücher
Watchguard
Watchguard Firebox M200 Bedienungsanleitung
Watchguard
Watchguard XTM 1520-RP Bedienungsanleitung
Watchguard
Watchguard WatchGuard XCS 170 Bedienungsanleitung
Watchguard
Watchguard Firebox M4800 Montageanleitung
Watchguard
Watchguard Firebox V60 Montage- und Bedienungsanleitung
Watchguard
Watchguard XCS Series Montageanleitung
Watchguard
Watchguard Firebox V10 Bedienungsanleitung
Watchguard
Watchguard Firebox V10 Bedienungsanleitung
Watchguard
Watchguard Firebox T35 Series Montageanleitung
Watchguard
Watchguard Firebox NV5 Montageanleitung
Watchguard
Watchguard Firebox T85 Bedienungsanleitung
Watchguard
Watchguard Firebox T25-W Bedienungsanleitung
Watchguard
Watchguard SOHO Bedienungsanleitung
Watchguard
Watchguard Firebox T80 Bedienungsanleitung
Watchguard
Watchguard Firebox V10 Montageanleitung
Watchguard
Watchguard XCS Series Montageanleitung
Watchguard
Watchguard Firebox T30 Bedienungsanleitung
Watchguard
Watchguard XTM 8 series Bedienungsanleitung
Watchguard
Watchguard Firebox T70 Bedienungsanleitung
Watchguard
Watchguard Firebox V10 Bedienungsanleitung
Beliebte Firewall Handbücher anderer Marken
Lanner electronics
Lanner electronics FW-7650 Series Bedienungsanleitung
Swisscom
Swisscom Internet Backup Bedienungsanleitung
SonicWALL
SonicWALL NSa 5700 Bedienungsanleitung
DPtech
DPtech FW1000 SERIES Bedienungsanleitung
FEITIAN
FEITIAN MultiPass FIDO Bedienungsanleitung
EBLOCKER
EBLOCKER PRO Bedienungsanleitung