Watec WAT-1200CS Bedienungsanleitung

WAT-1200CS

Rev. 1.00

OSD User's Manual

2017/4/18

Watec Co., Ltd.

Change History

Remarks

Rev. No.

Date

Changes

1.00

Initial Release

2017/4/18

1. Introduction ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 5

2. OSD Menu Operation

・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 6

3. MAIN MENU/SETUP MENU ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 8

OSD Menu ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 8

Save Settings(SAVE ALL) ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 8

Lens Settings(LENS) ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 9

3.3.1 DC Iris Lens Setting(LENS) ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 9

DC Iris Lens Control Mode(MODE) ・・・・・・・・・・・・・・・・・・・・・・・・ 10

DC Iris Lens Control Speed(SPEED) ・・・・・・・・・・・・・・・・・・・・・・・・ 11

Shutter/Gain Settings ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 12

3.4.1 Automatic Exposure Control(AUTO) ・・・・・・・・・・・・・・・・・・・・・・・・・・・ 12

Shutter Speed(SHUTTER) ・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 12

Brightness Settings, High Luminance Side(AE LEVEL) ・・・・・・・・・・・・・・・・・・ 13

Auto Gain Control(AGC) ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 13

Brightness Settings, Low Luminance Side ((AE LEVEL) ・・・・・・・・・・・・・・・・・・ 14

3.4.2 Manual Exposure Control(MANUAL) ・・・・・・・・・・・・・・・・・・・・・・・・・・ 15

Shutter Speed (SHUTTER) ・・・・・・・・・・・・・・・・・・・・・・・・・・・ 15

Gain Value Settings(AGC) ・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 15

White Balance(WHITE BAL) ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 16

3.5.1 Auto Trace White Balance(ATW) ・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 17

3.5.2 Push White Balance(PUSH) ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 17

3.5.3 Preset White Balance(USRE1 5100K/USER2 6300K) ・・・・・・・・・・・・・・・・・・・・ 18

3.5.4 Manual White Balance(MANUAL) ・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 19

3.5.5 Push Lock White Balance(PUSH LOCK) ・・・・・・・・・・・・・・・・・・・・・・・・・・ 20

Back Light Compensation (BACKLIGHT) ・・・・・・・・・・・・・・・・・・・・・・・・ 21

Picture Adjust(PICT ADJUST) ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 22

3.7.1 Image Flip(FLIP) ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 22

3.7.2 Brightness(BRIGHTNESS) ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 22

3.7.3 Contrast(CONTRAST) ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 23

3.7.4

Edge Enhancement(SHARPNESS)

・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 23

3.7.5 Chroma Settings(HUE,COLOR GAIN) ・・・・・・・・・・・・・・・・・・・・・・・・・・ 24

Defog(DEFOG) ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 25

Wide Dynamic Range / Tone Correction (WDR / ATR) ・・・・・・・・・・・・・・・・・ 26

3.9.1 Adaptive Tone-Curve Reproduction (ATR) ・・・・・・・・・・・・・・・・・・・・・・・・ 27

3.9.2

Wide Dynamic Range (WDR)

・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 28

Day & Night function (DAY/NIGHT) ・・・・・・・・・・・・・・・・・・・・・・・・・・ 29

3.10.1 Automatic Switching Mode (AUTO) ・・・・・・・・・・・・・・・・・・・・・・・・・・・ 29

Day / Night Switching Control (DELAY CNT / DAY→NIGHT / NIGHT→DAY)・・・・・・・ 30

3.10.2 Manual Switching Mode (MANUAL) ・・・・・・・・・・・・・・・・・・・・・・・・・・・ 32

Day / Night Setting (DAY/ NIGHT)

・・・・・・・・・・・・・・・・・・・・・・・・ 32

Burst Signal (BURST)

・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 32

3.10.2.2

3.8

3.10

3.9

3.5

3.4.1.2

3.4.1.3

3.10.1.1

3.4

3.7

3.4.1.4

3.4.2.1

3.10.2.1

【Contents】

3.1

3.3

3.6

3.3.1.1

3.3.1.2

3.4.2.2

3.4.1.1

3.2

IR LED Control(IR LED) ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 33

Noise Reduction(DNR) ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 34

Privacy Mask(PRIVACY) ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 35

CAMERA ID Setting(CAMERA ID)・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 38

LANGUAGE ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 42

Factory Reset(CAMERA RESET)・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 42

EXIT MENU(EXIT) ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 43

4. OSD Menu Tree ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 44

3.14

3.17

3.15

3.12

3.13

3.11

3.16

1. Introduction

・The WAT-1200CS user's manual describes the functions and the adjustment methods using the On Screen

Display (OSD).

・When the settings of the WAT-1200CS is changed according to the WAT-1200CS user's manual, check to see

that the operation and the effects of the changes made to the camera are acceptable.

・The WAT-1200CS user's manual is subject to change by design and the specifications of the product without notice.

・The copyright of the WAT-1200CS user's manual shall belong to Watec Co., Ltd.

Copying in whole or in part without the authorization of the holders permission is prohibited.

2.OSD MENU OPERATION

The functions and parameter settings of WAT-1200CS can be changed by OSD(On Screen Display).

Operate OSD with the controller.

a)When using the controller,vertically insert the connector fully until it clicks.

b)When disconnecting the controller, pull the connector while pinching the Lock.

The controller has 5 buttons, UP/DOWN/LEFT/RIGHT/ENTER.

1)UP

3)LEFT 4)RIGHT

2)DOWN 5)ENTER

Use 5 buttons above to operate the OSD menu.

1)UP/2)DOWN : Mainly to move the cursor up and down to select an item on the lists on the OSD menu.

3)LEFT/4)RIGHT : Mainly to adjust and change the functions on each list on the OSD menu.

5)ENTER : Mainly to execute the selected list and function on the OSD menu.

The symbol "↵" will be on some lists on the OSD menu to indicate that there are sub menus or selectable options by pressing 5)Enter.

The operation portion of the Controller

Controller Overview

How to Connect Controller

Lock

Please refer to the following model operation pictures on the basic controller usage.

The below picture shows the OSD operation when WHITE BAL(ATW) is selected as the defaulf position.

↑

*Default setting

Switching the Menu

* From the next page, each button is written as follows.

1)UP key is written as "UP" 2)DOWN key is written as "DOWN"

3)LEFT key is written as "LEFT" 4)RIGHT key is written as "RIGHT"

5)ENTER key is written as "ENTER"

Going to

Go to EXIT

SETUP MENU

Going to

SUB MENU

ENTER

RIGHT

DOWN

RIGHT

LEFT

3. MAIN MENU/SETUP MENU

3.1 OSD Menu

SETUP menu will appear on the screen when pressing ENTER,

Move the cursor to EXIT with UP/DOWN buttoms and press the ENTER to display the EXIT page.

OSD Menu is consist of 3 pages (SETUP MENU1/2-2/2 and EXIT).

3.2 Save settings (SAVE ALL)

Saving (SAVE ALL) the changes in camera settings. After changing camera settings, you can save the changed set values by executing

SAVE ALL on the EXIT page. Move the cursor to SAVE ALL with UP / DOWN / LEFT / RIGHT and press ENTER to save the set value.

The saved settings are kept even after the camera is powered off.

*Please note that when you turn off the power without saving the setting values after changing the setting or execute CANCEL

on the EXIT page, the changed setting will not be saved.

OSD = ON

OSD = OFF

EXIT

ENTER

SETUP MENU 2/2

ENTER

SETUP MENU 1/2

3.3 Lens Settings (LENS)

Change the lens setting according to the lens to be used. Move the cursor to LENS with UP/DOWN and use the

LEFT/RIGHT to switch MANUAL and DC.

Default : MANUAL

*When you select DC in the LENS setting while using a manual lens, ordinary exposure control may not be available.

Please change the LENS setting according to the lens to be used.

3.3.1 DC Iris Lens Setting (LENS)

Display the setting menu of the DC iris lens. Move the cursor to LENS and use the LEFT/RIGH to select DC.

After selecting DC, press ENTER to display the LENS menu. Move the cursor up and down and adjust items with LEFT/RIGHT.

Select this mode when using a DC iris lens.

MANUAL

LENS

Select this mode when using a manual iris lens.

LEFT/RIGHT

MANUAL

LENS MENU

OPERATION

ENTER

3.3.1.1 DC Iris Lens Control Mode (MODE)

Set the DC iris lens control mode (MODE). Use LEFT/RIGHT to select the MODE (lens aperture control)

Default : AUTO

* This function will be the following control state by combining with SHUTTER/AGC of "3.4 SHUTTER /AGC setting( SHUTTER / AGC)"

OPEN

DC Iris lens

Controls the lens aperture automatically.

Open the lens aperture fully.

OPEN

Control the lens aperture automatically.

AUTO

Open the lens aperture fully.

Control the lens aperture automatically.

Close the lens aperture fully.

SHUTTER/AGC

(LENS)

AUTO

Close the lens aperture fully.

*For ordinary imaging, use AUTO mode.

Close the lens aperture fully.

*AUTO is recommended for using DC iris lens.

Open the lens aperture fully.

LEFT/RIGHT

AUTO

OPERATION

MANUAL

AUTO

MODE

Lens in use

MODE

OPERATION

OPEN

AUTO

Inhaltsverzeichnis

Andere Watec Camcorder Handbücher

Watec

Watec WAT-910HX Bedienungsanleitung

Beliebte Camcorder Handbücher anderer Marken

Toshiba

Toshiba CAMILEO Z100 Bedienungsanleitung

Panasonic

Panasonic NV-VS40B Bedienungsanleitung

Canon

Canon RC 260 Bedienungsanleitung

Sony

Sony Handycam DCR-DVD7E Bedienungsanleitung

Brinno

Brinno TimeLapse TLC200 Bedienungsanleitung

JVC

JVC GR-SXM68AC Kurzanleitung

Panasonic

Panasonic AG-HMC152EN Bedienungsanleitung

MYDLINK

MYDLINK DCS-6100LH Bedienungsanleitung

Sony

Sony video Hi8 Handycam CCD-TR555 Bedienungsanleitung

SECURECOM

SECURECOM V-5014B Bedienungsanleitung

Sharper Image

Sharper Image U-VIDEO Bedienungsanleitung

JVC

JVC AA-V15EG Bedienungsanleitung

Canon

Canon LEGRIA HV40 Bedienungsanleitung

Sony

Sony Handycam DCR-VX2000 Bedienungsanleitung

RCA

RCA CC616 Bedienungsanleitung

Insignia

Insignia NS-DCC5HB09 - Camcorder - 720p Bedienungsanleitung

Panasonic

Panasonic NVM40 Bedienungsanleitung

ATIK Cameras

ATIK Cameras Horizon Bedienungsanleitung