WATSON Ni-MH Battery Pack Bedienungsanleitung
Owner's
Manual
Please read
before using
this equipment.
Ni-MH
Battery Pack
for Camcorders and
Digital Cameras
Thank you for
purchasing the
Watson Ni-MH
Battery Pack.
Browse through
this manual for
information and
useful tips on how
to use your new
equipment.
>
SAFETY INSTRUCTIONS:
Charge the battery pack before
use. Read your camcorder or
digital camera manual for charging
instructions.
When not in use, remove the
battery pack from its device and
store in a cool, dry place.
Do not short circuit the terminals.
This battery is protected with an
internal self-resetting fuse, but
sort circuits may still cause severe
damage to the battery.
Be careful where you set the
battery down.
Under no circumstance attempt to
open the battery case.
Do not expose the battery to rain
or moisture.
4 | Safety Instructions
Safety Instructions | 5
Keep away from fire. Do not
incinerate. Battery may explode in
the presence of fire.
Do not drop battery or expose it to
strong shocks.
Do not use at temperatures below
15°F (-10°C) or above 105°F
(40°C). Use of the battery at very
high temperatures will activate a
safety circuit, disallowing use.
Running time depends on
the power demanded. Stated
manufacturer run times are
developed in simple laboratory
tests of non-stop recording. Real-
life use of zoom, automatic focus,
tape review, etc., all demand extra
power and shorten run time.
6 | Maximizing Performance
TO MAXIMIZE BATTERY
PERFORMANCE
Make sure the battery is fully charged
before use.
Fully discharge before recharging.
Clean the battery and terminals with a
clean, soft, dry cloth.
The battery may be warm during use or
recharging. This is normal.
Total natural discharge may occur during
long storage periods. If the battery pack
is not to be used for a long time, perform
the following maintenance to extend its
life. Fully charge the battery. Discharge
the battery on your electronic equipment,
then remove and store in a cool, dry place.
Remove the battery from your equipment
when not in use. Some electronic
equipment will draw current even when
the switch is off.
When operation time has noticeably
shortened, the battery may need to be
replaced.
LIMITEd ONE-YEAR WARRANTY
Watson provides a limited warranty that this
product is free from defects in materials and
workmanship to the original purchaser under
normal use for a period of one (1) year from
the original purchase date or thirty (30) days
after replacement whichever occurs later. Our
responsibilitywith respect to thislimited warranty
shall be limited solely to repair or replacement, at
its option, of any product which fails during normal
consumer use. To obtain warranty coverage
during the Warranty Period, contact your place of
purchase ("Seller") to obtain a return merchandise
authorization ("RMA") number, and return to
Seller the defective product along with proof of
purchase and the RMA number. This warranty
does not extend to damage or failure which results
from misuse, neglect, accident, alteration, abuse,
improper installation or maintenance. EXCEPT AS
PROVIDED HEREIN, WATSON MAKES NEITHER
ANY EXPRESS WARRANTIES NOR ANY IMPLIED
WARRANTIES, INCLUDING BUT NOT LIMITED TO
ANY IMPLIED WARRANTY OF MERCHANTABILITY
OR FITNESS FOR A PARTICULAR PURPOSE.
This warranty provides you with specific
legal rights, and you may also have additional
rights which vary from state to state.
Warranty | 7
www.poweredbywatson.com
Inhaltsverzeichnis
Andere WATSON Kamerazubehör Handbücher
