Wavecom WMOD2B Bedienungsanleitung

USER MANUAL

WMOD2B dual-band

900 / 1800 MHz modem

SUMMARY

1. PRODUCT DESCRIPTION 1

1.1 Package content 1

1.2 Product presentation 1

1.3 Physical characteristics 2

1.4 Functions - GSM Modes 2

1.5 Temperature range 2

2. INSTALLATION/START-UP 3

2.1 Mounting the modem 3

2.2 Installing the modem 3

2.3 Electrical characteristics 4

2.3.1 Switching the GSM modem on/off 4

2.3.2 Voltage range 4

2.3.3 Overvoltage/undervoltage 4

2.3.4 Power supply cable 5

2.3.5 Input/output electrical characteristics defined for all external connections 6

2.3.6 Protection/on-board network connection 6

3. DESCRIPTIONOFTHEINTERFACES 7

3.1 LED Function 7

3.2 Connectors 7

4. TECHNICAL DATA 11

SUMMARY

Wavecom WMOD2B Modem

5. TROUBLESHOOTING: Specific defaults possibly encountered 12

5.1 The modem does not answer through the serial link 12

5.2 The modem always returns «Error» when trying to issue a communication 13

5.3 The modem always returns «No carrier» when trying to issue a communication 14

6. REFERENCE ACCESSORIES 16

7. NOTES ON SAFETY 16

7.1 General safety 16

7.2 Vehicle safety 17

7.3 Car And Maintenance 17

7.4 Your responsibility 18

8. GENERAL INFORMATIONS 19

SUMMARY

Wavecom WMOD2B Modem

1. PRODUCT DESCRIPTION

The Wavecom WMOD2B is a dual-band E-GSM 900/1800 modem.

1.1 Package content

The Wavecom WMOD2B modem package comprises:

- 1 Modem

- 2 holding bridles

- 1 Power supply cable + fuse

- 1 User manual (this document)

1.2 Product presentation

The Wavecom WMOD2B modem supports DATA and FAX transmission, Short Messages (Point to Point and Cell Broadcast)

and VOICE calls.

The connectors binded to the body guarantee output and input connections.

An extractible holder is used to insert the SIM card (Micro-SIM type). A LED indicates the operating mode.

PRODUCT DESCRIPTION

Wavecom WMOD2B Modem 1

Micro-Fit

connector

SUB HD

connector

Front cap

LED

Extractible

SIM holder

SMA

connector

Back cap

Figure 1

Modem presentation

1.3 Physical characteristics

1.4 Functions - GSM Modes

1.5 Temperature range

Operating conditions : From -20°C to +55°C

Storage conditions : From -25°C to +70°C

dradnatS )W1(1ssalCzHM0081MSGdna)W2(4ssalCzHM009MSGdednetxEdnaBlauD

ecafretnI noitcnufgniduabotuA82.V/42.V232SRecafretnilaireS 70.70&50.70MSGdnaret52.VnodesabtesdnammocTA

SMS .)TM(detanimreTeliboMdna)OM(detanigirOeliboM .tsacdaorblleC.tniopottniopUDP&txeTedoM .50.70MSGhtiwecnadroccanI

ataD

.s/stib00441dna0069,0084,0042suonorhcnysA .edomtnerapsnarTnoNdnatnerapsnarT .sduab57/0021,0021,003:ylnoedoMtnerapsnarTnoNnI .)NDSI(011Vdna)NTSP(zHK1.3edoM

xaF s/stib0069/0027/0084/0042 .edoMtnerapsnarTni26ecivreseletMSG .elbitapmoc3epuorG.2ssalC

oiduA .tik-racdnatesdnah:)snoitpo(seirosseccA.etaRlluFdecnahnE/etaRlluF/etaRflaH

PRODUCT DESCRIPTION

Wavecom WMOD2B Modem 2

snoisnemiD)srotcennocgnidulcxe(mm52x45x89

snoisnemidllarevOmm52x45x011

thgieWsmarg031<

emuloV3mc32.31

gnisuoHdeliforpmuinimulA

2 INSTALLATION/START-UP

2.1 Mounting the modem

For mounting the modem, bind to the body the holding bridles according to the schema below:

Figure 2

Modem mounting

2.2 Installing the modem

To install the modem, plug the device on a DC power supply (for automotive applications, connect the device on the

permanent « + » and insert the SIM card in the holder).

Make sure that an antenna is connected.

In order to extract or to insert the Micro SIM card, it is necessary to press the SIM holder ejector

with a sharp element (a pen for example).

If this sequence is not respected, the SIM holder could be damaged.

INSTALLATION/START-UP

Wavecom WMOD2B Modem 3

Note:

- To be attached to a plain surface

- Screw head max. height: 2mm

2 mm

Holding bridles

2.3 Electrical characteristics

2.3.1 Switching the GSM modem on/off

The device is permanently powered (when connected to the power supply).

2.3.2 Voltage range

Voltage range : 5 to 32V DC

GND : 0V

2.3.3 Overvoltage/undervoltage

Correct operation of the Wavecom WMOD2B modem in communication mode is not guaranteed if input voltage

fall below 5V. The modem is protected against voltage over 32V.

When input voltages exceed 32V, the supply voltage is disconnected in order to protect the electronic components from an

overvoltage.

TWO CASES ARE POSSIBLE:

- IF THE OVERVOLTAGE IS CONTINUOUS, THE PROTECTION IS GUARANTEED BY THE FUSE.

- IN THE CASE OF TRANSIENT PEAKS, THE MODEM GUARANTEES ITS OWN PROTECTION.

INSTALLATION/START-UP

Wavecom WMOD2B Modem 4

2.3.4 Power supply cable

A cable, included in the package shall be used for power supply connection.

Thewiresaremarkedasfollows:

Cable : 1 wire

Ame : tinned copper 24x0.2 mm

Section : 0.75 mm2

Figure 3

Power supply cable

INSTALLATION/START-UP

Wavecom WMOD2B Modem 5

Side view

Connector Molex Micro-Fit 3.0

Cables stripped over 200 mm,

protected by their own sheath Standard cable sheath

Stripped wire, tinned over 5 mm

2.3.5 Input/output electrical characteristics defined for all external connections

* RS232 driver (MAX3238) automatically shutdown after 30s of inactivity on the serial link.

The tests are carried out with a 3V SIM card.

The power consumption might vary of 5% over the whole operating temperature range (-20°C to +55°C)

2.3.6 Protection/on-board network connection

The modem is protected by a fuse directly binded on the power supply cable.

sretemaraP 009MSG0091/0081MSG

TINU

NIMPYTXAMNIMPYTXAM

:C°52@ylppusrewoP egatlovylppustupnI52.31235 2.3123V

tnerrucylppuskaeptupnI )xamP@noitacinummocni(

V5@8.11.1A

V2.31@7.04.0A

V23@4.02.0A

tnerrucylppusegarevatupnI )xamP@noitacinummocni(

V5@033022Am

V2.31@03159Am

V23@5605Am

edomeldinitnerrucylppusegarevatupnI V5@4.134.13Am

V2.31@2.312.31Am

V23@6.56.5Am

edomeldinitnerrucylppusegarevatupnI *)revird232SRehtfonwodtuhs-otuahtiw(

V5@8.88.8Am

V2.31@1.41.4Am

V23@2.22.2Am

:knillaireS 232SR-

:)tesdaeh(oiduA niagtsewol@egatlovtupnienohporciM .8.3428.34smrVm

.niagmumixam@egatlovtuptuorekaepS 56.156.1smrV

ecnadepmirekaepS2323

Ω

MIS 5ro35ro3V

INSTALLATION/START-UP

Wavecom WMOD2B Modem 6

3. DESCRIPTIONOFTHEINTERFACES

The modem comprises several interfaces:

- LED function indicating operating status

- External antenna (via SMA)

- Serial and control link (via 15 pins SUB D)

- Power supply (via 4 pins Micro-FitTM)

- SIM card holder

3.1 LED Function

- LED off Device switched off - Not ready

- LED on Device switched on - Connecting to network

- LED flashing slowly Device switched on - Idle mode (registered on network)

- LED flashing rapidly Device switched on - Transmission mode

3.2 Connectors

DESCRIPTION OF THE INTERFACES

Wavecom WMOD2B Modem 7

rotcennoCnoitcnuF

AMSrotcennocannetnaFR

DBUSsnip51

)ytisnedhgih(

knil232SR

knilOIDUA

TESER

tiF-orciMsnip4

rotcennocylppusrewoP

rotcennoc»MIS«noitcennocdracMIS

Andere Handbücher für WMOD2B

Inhaltsverzeichnis

Andere Wavecom Modem Handbücher

Wavecom

Wavecom WMO2 GSM 900 Bedienungsanleitung

Wavecom

Wavecom Fastrack M1206 Bedienungsanleitung

Wavecom

Wavecom WMO2 Bedienungsanleitung

Wavecom

Wavecom SAM Bedienungsanleitung

Wavecom

Wavecom G2 Bedienungsanleitung

Wavecom

Wavecom Fastrack M1200 series Bedienungsanleitung

Wavecom

Wavecom SAM 3G Plus Bedienungsanleitung

Wavecom

Wavecom WMOD2B Bedienungsanleitung

Wavecom

Wavecom WMO1-G900 Bedienungsanleitung

Wavecom

Wavecom WMOi3 Bedienungsanleitung

Wavecom

Wavecom WMOi3 Bedienungsanleitung

Wavecom

Wavecom FASTRACK M1306B Bedienungsanleitung

Beliebte Modem Handbücher anderer Marken

Davicom

Davicom DM562AP Bedienungsanleitung

EpiValley

EpiValley TATA indicom SXC-1080 Bedienungsanleitung

Zte

Zte WiMAX Bedienungsanleitung

Intelimax

Intelimax MA-2060 Bedienungsanleitung

SMC Networks

SMC Networks D3CM1604V Gebrauchs- und Pflegehandbuch

Telstra

Telstra Wi-Fi 4G Advanced Pro X Bedienungsanleitung

Thrane&Thrane

Thrane&Thrane imarsat EXPLORER 300 Bedienungsanleitung

Samsung

Samsung AceLink SAM-335A Bedienungsanleitung

Enfora

Enfora Enabler-G Kurzanleitung zur Einrichtung

iRZ

iRZ ATM2-232 Bedienungsanleitung

Zhone

Zhone 6310 Bedienungsanleitung

Paradyne

Paradyne Hotwire 7976 Bedienungsanleitung

US Robotics

US Robotics 3453C Bedienungsanleitung

MaxTech

MaxTech Plug & Play Internal Voice/FAX/Data/SVD... Bedienungsanleitung

Zte

Zte MF823 Bedienungsanleitung

Four-Faith

Four-Faith F1403 Bedienungsanleitung

Sierra Wireless

Sierra Wireless AIRLINK MP595W Bedienungsanleitung

Gemtek

Gemtek WiMAX WIXFBR-103 Bedienungsanleitung