WaveRider EUM3005 Bedienungsanleitung

EUM3005

Installation Guide

APCD-LM047-2.1

APCD-LM047-2.1 ii

copy and/or print as many copies of this manual as

you wish, as long as the software license agreement

and this copyright statement are included.

Release 2.1, Feb 2006

The following are trademarks or registered trademarks of their respective companies or organi-

zations:

Windows XP/Microsoft

Windows 2000/Microsoft

iii APCD-LM047-2.1

Software License Agreement

This is a legal agreement between you (either an individual or an entity) and WaveRider Communica-

tions Inc. for the use of WaveRider computer software, hereinafter the “LICENSED SOFTWARE”.

By using the LICENSED SOFTWARE installed in this product, you acknowledge that you have

read this license agreement, understand it, and agree to be bound by its terms. You further

agree that it is the full and complete agreement between you and WaveRider Communications

Inc., superseding all prior written or verbal agreements of any kind related to the LICENSED

SOFTWARE. If you do not understand or do not agree to the terms of this agreement, you will

cease using the LICENSED SOFTWARE immediately.

1. GRANT OF LICENSE—This License Agreement permits you to use one copy of the LICENSED

SOFTWARE.

2. COPYRIGHT—The LICENSED SOFTWARE is owned by WaveRider Communications Inc. and is

protected by copyright laws and international treaty provisions; therefore, you must treat the

LICENSED SOFTWARE like any other copyrighted material (e.g., a book or magazine).

3. LIMITS OF FEATURE AVAILABILITY—The LICENSED SOFTWARE is sold with limitations as

to certain feature availability and use. These limits are governed by the terms of the purchase

agreement. Any actions resulting in the exceeding of these limits is not permitted, and can result

in unpredictable performance.

4. OTHER RESTRICTIONS—You may not rent or lease the LICENSED SOFTWARE. You

may not reverse engineer, decompile, or disassemble the LICENSED SOFTWARE.

5. LIMITED WARRANTY—The LICENSED SOFTWARE is provided “as is” without any warranty of

any kind, either expressed or implied, including, but not limited to, the implied warranties of

merchantability and fitness for a particular purpose. The entire risk as to the quality and

performance of the LICENSED SOFTWARE is with you, the licensee. If the LICENSED

SOFTWARE is defective, you assume the risk and liability for the entire cost of all necessary

repair, service, or correction.

Some states/jurisdictions do not allow the exclusion of implied warranties, so the

above exclusion may not apply to you. This warranty gives you specific legal

rights, and you may have other rights, which vary from state/jurisdiction to state/

jurisdiction.

WaveRider Communications Inc. does not warrant that the functions contained in

the LICENSED SOFTWARE will meet your requirements, or that the operation of

the LICENSED SOFTWARE will be error-free or uninterrupted.

6. NO OTHER WARRANTIES—To the maximum extent permitted by applicable law, WaveRider

Communications Inc. disclaims all other warranties, either express or implied, including, but not

limited to, the implied warranties of merchantability and fitness for a particular purpose, with

regard to the LICENSED SOFTWARE and the accompanying written materials.

7. NO LIABILITY FOR CONSEQUENTIAL DAMAGES—To the maximum extent permitted by

applicable law, in no event shall WaveRider Communications Inc. or its suppliers be liable

for any damages whatsoever (including, without limitation, damages for loss of business

profits, business interruption, loss of business information, or any other pecuniary loss)

arising from the use of or inability to use the LICENSED SOFTWARE, even if WaveRider

Communications Inc. has been advised of the possibility of such damages, or for any claim

by any other party.

Because some states/jurisdictions do not allow the exclusion or limitation of liability for

consequential or incidental damages, the above limitation may not apply to you. In no event will

WaveRider’s liability exceed the amount paid for the LICENSED SOFTWARE.

APCD-LM047-2.1 iv

Warranty

In the following warranty text, “WaveRider®” shall mean WaveRider Communications Inc.

This WaveRider product is warranted against defects in material and workmanship for a period

of one (1) year from the date of purchase. During this warranty period WaveRider will, at its

option, either repair or replace products that prove to be defective.

For warranty service or repair, the product must be returned to a service facility designated by

WaveRider. Authorization to return products must be obtained prior to shipment. The WaveR-

ider RMA number must be on the shipping documentation so that the service facility will accept

the product. The buyer shall pay all shipping charges to WaveRider and WaveRider shall pay

shipping charges to return the product to the buyer within Canada or the USA. For all other

countries, the buyer shall pay shipping charges as well as duties and taxes incurred in shipping

products to or from WaveRider.

WaveRider warrants that the firmware designed by it for use with the unit will execute its pro-

gramming instructions when properly installed on the unit. WaveRider does not warrant that the

operation of the unit or firmware will be uninterrupted or error-free.

Limitation of Warranty

The foregoing warranty shall not apply to defects resulting from improper or inadequate mainte-

nance by the buyer, buyer-supplied interfacing, unauthorized modification or misuse, operation

outside the environmental specifications for the product, or improper site preparation or mainte-

nance. No other warranty is expressed or implied. WaveRider specifically disclaims the implied

warranties of merchantability and fitness for any particular purpose.

No Liability for Consequential Damages

To the maximum extent permitted by applicable law, in no event shall WaveRider or its suppliers

be liable for any damages whatsoever (including, without limitation, damages for loss of busi-

ness profits, business interruption, loss of business information, or any other pecuniary loss)

arising from the use of or inability to use the product, even if WaveRider has been advised of the

possibility of such damages, or for any claim by any other party.

Because some states/jurisdictions do not allow the exclusion or limitation of liability for conse-

quential or incidental damages, the above limitation may not apply to you.

In no event will WaveRider’s liability exceed the amount paid for the product.

Regulatory Notices

This equipment has been tested and found to comply with the limits for a Class B Intentional

Radiator, pursuant to Part 15 of the FCC Regulations. These limits are intended to provide pro-

tection against harmful interference when the equipment is operated in a residential environ-

ment.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed

and used in accordance with the instruction manual, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not occur in a particular

installation.

Notice to User

Any changes or modifications to equipment that are not expressly approved by WaveRider may

void the user’s authority to operate the equipment.

APCD-LM047-2.1 v

Contents

Figures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .vi

Tables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vii

Preface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . viii

1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

1.1 Document Scope . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

1.2 EUM3005 Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

1.3 EUM3005 - End-user Modem or Customer Premises Equipment . . . . . . . . . . . . . . . . 4

1.3.1 EUM3005 Active Diversity Indoor Antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

1.3.2 EUM3005 Modem - External Indicators and Connectors . . . . . . . . . . . . . . . . . 7

1.3.3 Ethernet Port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

1.3.4 Power Supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

2 Setup Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

2.1 Accessing the Setup Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

2.2 Setup Menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

2.3 Radio Link Status Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

2.4 Troubleshooting Information Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

3 Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

3.1 Installation Checklist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

3.2 Pre-Installation Steps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

3.2.1 Network and EUM3005 Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

3.2.2 Verifying the EUM3005 Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

3.2.3 End-Users PC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

3.3 Installation Steps. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

3.3.1 Locating the EUM3005 Antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

3.3.2 Mounting and Orienting the EUM3005 Antenna . . . . . . . . . . . . . . . . . . . . . . . 21

3.3.3 Connecting the End-User’s PC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

3.3.4 Testing the Data Link . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

3.4 Post-Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Appendix A Factory Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Appendix B Ethernet Cables and Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

APCD-LM047-2.1 vi

Figures

Figure 1 EUM3005 Indoor Modem with Indoor Active Diversity Antenna . . . . . . . . . . 3

Figure 2 EUM3005 Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Figure 3 Indoor Antenna Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Figure 4 EUM3005 Indoor Antenna with Switched-beam Diversity . . . . . . . . . . . . . . . 6

Figure 5 EUM3005 Switched-beam Diversity Antenna — Beam Patterns . . . . . . . . . 7

Figure 6 EUM3005 Modem - External Indicators and Connectors . . . . . . . . . . . . . . . 8

Figure 7 Typical Installations of EUM3005 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Figure 8 T568A Wiring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Figure 9 T568B Wiring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

APCD-LM047-2.1 vii

Tables

Table 1 Ethernet Status LEDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Table 2 Power ON LED Status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Table 3 Signal Level LED Status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Table 4 Signal Strength Figure of Merit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Table 5 Signal Quality Figure of Merit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Table 6 Pre-Installation Stage Checklist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Table 7 Installation Stage Checklist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Table 8 Ethernet Interface Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

Table 9 Wiring T568A and T568B ends for Ethernet Cables . . . . . . . . . . . . . . . . . . 30

APCD-LM047-2.1 viii

Preface

Conventions

The following conventions are used throughout this document:

WARNING!

Whenever you see this icon and heading, the associated text

addresses or discusses a critical safety or regulatory issue.

CAUTION: Whenever you see this icon and heading, the

associated text discusses an issue, which, if not followed, could

result in damage to, or improper use of, the equipment or

software.

TIP: Whenever you see this icon and heading, the associated

text provides a tip for facilitating the installation, testing, or

operation of the equipment or software.

Regulatory Notices

This device has been designed to operate with its indoor active diversity antenna only. This

device has been tested using unshielded Ethernet CAT-5 cable.

Industry Canada

The IC Certification Number for the EUM3005 (Cdn) is 3225B-EUM3003.

Operators must be familiar with IC RSS-210 and RSS-102. The EUM3005 (Cdn) has

been designed and manufactured to comply with IC RSS-210 and RSS-102.

Due to different regulatory requirements, the EUM3005 (Cdn) outputs about 1.5 dB

less power than the EUM3005 and is to be used in Canada. The EUM3005 (Cdn) is

labelled clearly as such. An EUM3005 (Cdn) can be used in the US, since it has lower

power than the FCC requirements. However, an EUM3005 cannot be used in Canada

due to its higher output power.

APCD-LM047-2.1 ix

Federal Communications Commission

The EUM3005 has been designed and manufactured to comply with FCC Part 15.

Operators must be familiar with the requirements of the FCC Part 15 Regulations prior

to operating any link using this equipment. For installations outside the United States,

contact local authorities for applicable regulations.

The FCC ID for the EUM3005 equipment is OOX-EUM3005.

The transmitter of this device complies with Part 15.247 of the FCC Rules.

Note: This equipment has been tested and found to comply with the limits for a Class

B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause harmful

interference to radio communications. However, there is no guarantee that

interference will not occur in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Interference Environment

Operation is subject to the following conditions:

• This device may not cause harmful interference and,

• This device must accept any interference received, including interference that

might cause undesired operation.

Operational Requirements

In accordance with the FCC Part 15 regulations:

1. The maximum average power output of the intentional radiator shall not

exceed one (1) watt (30 dBm) for all spread spectrum systems operating in

the 902 to 928MHz band.

2. Stations operating in the 902 to 928MHz band may use transmitting antennas

of directional gain greater than 6dBi, provided the average output power from

the intentional radiator is reduced by the amount in dB that the directional gain

of the antenna exceeds 6dBi.

3. The operator of a spread spectrum system and the user of the radio device

are each responsible for ensuring that the system is operated in the manner

outlined in Interference Environment on page ix.

APCD-LM047-2.1 x

The EUM3005 with its indoor diverstiy antenna complies with these requirements, since the

maximum average transmitting power is 24.4 dBm measured at the antenna port . This is 5.6

dB below the maximum allowed, so the active diversity indoor antenna system with its 4.4 dBi

gain, including the loss in the captive RF cable, is allowed.

Warnings and Advisories

General Advisory

Installers, operators and maintenance personnel must be familiar with the related safety

requirements before they attempt to install or operate the EUM3005.

It is the responsibility of the operator to ensure that the public is not exposed to excessive

Radio Frequency (RF) levels. The applicable regulations can be obtained from local

authorities.

WARNING!

To comply with FCC RF exposure limits, the EUM3005 must

be fix-mounted indoors to provide a separation distance of

20cm (8 inches) or more from all persons to satisfy RF

exposure requirements. The distance is measured from the

nearest point of the modem to the human body. It is

recommended that the modem be installed in a location with

minimal pathway disruption by nearby personnel.

Important Safeguards

WARNING!

CAUTION: To reduce risk of electrical shock, do not remove

covers, since there are no user-serviceable parts inside.

Refer servicing to qualified personnel.

1. Read all these instructions before installing and operating the EUM3005.

2. Retain these instructions for future reference.

3. Heed all warnings on the EUM3005 and in these instructions.

4. Follow all instructions.

5. Do not use EUM3005 and power supply near water.

6. Unplug EUM3005 and power supply from the wall outlet before cleaning. Clean only

with a damp cloth.

7. Use only attachments recommended by WaveRider.

Inhaltsverzeichnis

Andere WaveRider Modem Handbücher

WaveRider

WaveRider EUM3006 Bedienungsanleitung

Beliebte Modem Handbücher anderer Marken

Davicom

Davicom DM562AP Bedienungsanleitung

EpiValley

EpiValley TATA indicom SXC-1080 Bedienungsanleitung

Zte

Zte WiMAX Bedienungsanleitung

Intelimax

Intelimax MA-2060 Bedienungsanleitung

SMC Networks

SMC Networks D3CM1604V Gebrauchs- und Pflegehandbuch

Telstra

Telstra Wi-Fi 4G Advanced Pro X Bedienungsanleitung

Thrane&Thrane

Thrane&Thrane imarsat EXPLORER 300 Bedienungsanleitung

Samsung

Samsung AceLink SAM-335A Bedienungsanleitung

Enfora

Enfora Enabler-G Kurzanleitung zur Einrichtung

iRZ

iRZ ATM2-232 Bedienungsanleitung

Zhone

Zhone 6310 Bedienungsanleitung

Paradyne

Paradyne Hotwire 7976 Bedienungsanleitung

US Robotics

US Robotics 3453C Bedienungsanleitung

MaxTech

MaxTech Plug & Play Internal Voice/FAX/Data/SVD... Bedienungsanleitung

Zte

Zte MF823 Bedienungsanleitung

Four-Faith

Four-Faith F1403 Bedienungsanleitung

Sierra Wireless

Sierra Wireless AIRLINK MP595W Bedienungsanleitung

Gemtek

Gemtek WiMAX WIXFBR-103 Bedienungsanleitung