Weather X RPS8807DT Bedienungsanleitung

RPS8807DT

Power Generator

INSTRUCTION MANUAL

TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE

THIS UNIT TO RAIN OR MOISTURE.

The unit generates the same potentially lethal AC power as a normal

household wall outlet. Do not insert foreign objects into the AC Outlet,

the DC Power Socket and Cable Port, or the ventilation holes.

This symbol, located on back or bottom of the unit, is intended to alert the user to the

presence of uninsulated “dangerous voltage” within the product’s enclosure that may

be of sufcient magnitude to constitute a risk of electric shock to persons.

This symbol, located on back or bottom of the unit, is intended to alert the user to

the presence of important operating and maintenance (servicing) instructions in the

literature accompanying the appliance.

CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE

BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.

To reduce the risk of electric shock, do not remove cover (or back). There are no user-ser-

viceable parts inside. Please refer any servicing to qualied service personnel.

WARNING: Changes or modications to this unit not expressly approved by the party

responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B

digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation. This equip-

ment generates, uses, and can radiate radio frequency energy and, if not installed and used

in accordance with the instructions, may cause harmful interference to radio communica-

tions. However, there is no guarantee that interference will not occur in a particular instal-

lation. If this equipment does cause harmful interference to radio or television reception,

which can be determined by turning the equipment off and on, the user is encouraged to

try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the re-

ceiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Warnings and Precautions

The dis-engagement key must be removed before this unit will operate

correctly.

Do not use a charging method for the unit that exceeds 15V DC. This could

lead to an accumulation of hydrogen and a potential explosion.

There is a danger of explosion if you attempt to charge standard AA batteries

in the Flashlight. Only use rechargeable AA NiMH batteries or the built-in

NiMH battery.

The compressor is designed for short term operation only. Operating the

compressor over an extended period of time will cause the compressor unit to

overheat, which could lead to re.

!Never leave the compressor unattended while in operation. The compressor

is capable of inating to 250 PSI. Do not exceed the recommended pressure

of either the compressor or the object being inated. If either recommended

pressure is exceeded, an explosion may result.

AMG Battery

Before being shipped, a safety

key was placed in the bottom of

the unit to disengage the sealed

lead-acid battery for safety

reasons, as well as to improve

the longevity of the battery.

The dis-engagement key must be removed before this unit will operate

correctly.

To enable the battery for usage,

simply pull this key out of the

unit.

Charging and Maintenance

BATTERY DISCHARGE

The AGM battery is a type of sealed lead acid battery. This battery gradually

discharges when left unused, and you need to recharge it periodically to maintain

maximum battery capacity. To ensure safe recharging and maximum battery life,

recharge the station unit only with the supplied adaptor.

Due to inherent self-discharge, lead acid batteries must be charged at least every 3

months.

Sealed lead acid batteries function best if they are discharged to only about 85% of

nominal voltage (10.2V on 12V battery).

Do not use a charging method that exceeds 15V DC. This could lead to an

accumulation of hydrogen and a potential explosion.

Features

22 32

Features Dened

1 Power Diagnostics Press the BATTERY LEVEL button to view the charge of the sealed lead acid

battery. The Charge and AC Output indicators show the status of the battery. If the Charge indicator is

red, unit is charging, and if it is green, the unit is fully charged. The AC Output indicator shows when

the AC output is switched on.

2Air Hose Use the Air Hose to inate an inatable object.

3 Flashlight The inset ashlight can be removed from the unit by pressing the RELEASE button.

4 Torch Power Press the TORCH button to switch the inset Flashlight on and off.

5 DC Power (12V) Press the DC power button to enable or disable the DC SOCKET.

6 AC SOCKETS (120V) Use the AC 120V SOCKETS to power external devices. The AC Power button

must be switched to the on position for the sockets to receive power.

7 AC Power (120V/60Hz) Press the AC power button to enable or disable the AC SOCKETS.

8 DC IN 12 Use the DC IN jack to charge the unit, using an AC Adapter or DC car charger.

9 Air Compressor Power Press the AIR COMPRESSOR power button to turn the air compressor on and

off.

10 LAMP Toggle the LAMP switch between ALL, ONE, OFF, and EMERGENCY to adjust the lamp’s

light settings. If the switch is set to EMERGENCY and the unit is charging through the DC In, it will

automatically detect a power outage and power on the unit’s lamp.

11 Air Gauge Use the air gauge to view the pounds per square inch or kilogram per square centimeters of

air pressure, of an inatable object.

12 Triple Fluorescent Lamp The Triple Fluorescent Lamp can be adjusted to different light settings using

the LAMP toggle switch.

13 LCD Display View the Time, AM Indicator, PM Indicator, and Radio Frequency through this Liquid

Crystal Display.

14 CLK ADJ/DISPLAY Press and hold the CLOCK button to set the clock and alarms. Press the DIS-

PLAY button to cycle through the clock, alarm 1, and alarm 2 on the LCD display.

15 FUNCTION Press the FUNCTION button to cycle through AM, FM, WB (weatherband) radio, or

AUX Input.

16 ALARM 2 Press the ALARM 2 button to activate the alarm to buzzer or radio.

17 ALARM 1 Press the ALARM 1 button to activate the alarm to buzzer or radio.

18 MEM/ALERT Press the MEM button to save a radio station to the power generators memory. With

the power off, press the ALERT button to activate the alert feature, which sounds an alarm when emer-

gency weather information is being broadcast through the weatherband.

19 SLEEP Press the SLEEP button to set the power generator to go off in 10 - 90 minutes.

20 VOLUME Press + or - on the VOLUME button to increase or decrease the volume.

21 Accessory Compartment Use the Accessory Compartment to store Air Hose attachments.

22 SNOOZE Press the SNOOZE button to delay ALARM 1 or ALARM 2 for 5 minutes after either one

has sounded.

23 Thermometer Use the thermometer to view the temperature in Fahrenheit or Celsius.

24 Release Press the Release button to release the inset ashlight from it’s compartment.

25 DC SOCKET (12V) Plug in to the DC 12V SOCKET using a car adapter to power external devices.

26 FM Antenna The FM extendable antenna provides exibility and range when adjusting the FM recep-

tion. An AM Antenna is built into the player.

27 POWER Press the POWER button to turn the generator on or off.

28 - TUN/MIN/HR + Press + and - on the TUN button to change the AM, FM, or Weatherband radio fre-

quency. Press + and - on the MIN and HR buttons to adjust the minute and hour when setting the clock

and alarms.

29 - MEM + Press + and - on the MEM button to cycle through the saved AM and FM radio stations.

30 AUX In Use the AUX (auxiliary) jack to connect other audio devices to the player.

31 SIREN Toggle the SIREN switch to ON to activate an emergency siren. When activated the Flashlight

will blink.

32 Reset Using a paperclip, press the reset button to restore all default factory settings on the power gen-

erator.

Features Dened

Powers and/or Recharges

Watts

Rating

Run

Time

AC Powered Products

Digital Cameras 2 50 Hrs

Camcorders 10 10 Hrs

Worklights 25 4 Hr

Color TVs (up to 13”) 48 2 Hrs

Portable Radios 50 2 Hrs

Laptop Computers 60 2 Hrs

Video Game Consoles 60 2 Hrs

Lamps 70 1 Hrs

DC Powered Products

Cell Phones 3 90 Hr

Portable Electric Coolers 60 3 Hrs

Portable Car Vacs 90 2 Hrs

Run Times Chart

Weatherband

National Oceanic and Atmospheric Agency (NOAA) 7 band

weatherband alerts you to the latest news and weather, specic to

the largest nearby city. In addition, you can tune into other local

broadcasts with the AM/FM radio.

The ashlight can be run off

of the internal rechargeable

NiMh Battery, or it will take

4-AA Rechargeable Alkaline

Batteries.

Set the switch inside the battery compartment to NiMH to set the unit to

charge either the NiMH built-in battery or rechargeable AA NiMH batteries.

Set the switch to Alkaline when using non-rechargeable AA batteries.

There is a danger of explosion if you attempt to charge standard AA batteries.

Only use rechargeable AA NiMH batteries or the built-in NiMH battery, with

the switch set to NiMH.

OFF

“ A A ” U M -3 S IZ E“ A A ” UM- 3 S I Z E

A -

“A ” U M 3S IZE

A - Z E

“A ” U M 3 S I

O P E N

ALK ALINE

RECHARGEABLE

(Ni-mH)

OFF

“ A A ” U M -3 S IZE

A -

“A ” UM 3S IZE

A - ZE

“A ” UM 3 S I

ALKAL INE

RECHARGEABLE

(Ni-mH)

O P E N

Special Features

These different air compressor

attachments can be stored in

the accessory compartment.

Use the included air compres-

sor adapters to inate a variety

of inatable objects.

If the LAMP function switch is set to EMERGENCY and the unit is plugged into an

AC Outlet, the unit will automatically detect a power outage and power on the unit’s

lamp.

Emergency On

Operations

Using the AC Out Power (200W Maximum Output)

a. Plug an AC appliance into one of the two AC outlets.

b. Press the AC Power switch to turn the AC power on, the AC Power Indicator will

illuminate when the AC power is on.

c. Use the appliance freely, and remember to recharge the unit afterwards.

This unit has built-in protection against output overload in the AC sockets. If you

connect an appliance that draws more than 200W, or one which draws excessive

surge power, the power to the AC outlet automatically shuts off. To resume AC

outlet use, switch off the AC power switch ,and then switch back on.

Setting the Clock & Alarms

a. Press and hold the CLK ADJ button until the clock hour blinks

b. Press Tune +/- to change the clock hour

c. Press the CLK ADJ button

d. Press Tune +/- to change the clock minute

e. Press the CLK ADJ button again to set the ALM 1

f. Press Tune +/- to change the ALM 1 hour

g. Press the CLK ADJ button

h. Press Tune +/- to change the ALM 1 minute

i. Press the CLK ADJ button again to set the ALM 2

j. Press Tune +/- to change the ALM 2 hour

k. Press the CLK ADJ button

l. Press Tune +/- to change the ALM 2 minute

m. Press the CLK ADJ button

See the Run Times Chart on page 7 for length of use times.

Andere Handbücher für RPS8807DT

Inhaltsverzeichnis

Andere Weather X Wechselrichter Handbücher

Weather X

Weather X RPS8807DT Bedienungsanleitung

Beliebte Wechselrichter Handbücher anderer Marken

Fourgroup

Fourgroup Easy Bedienungsanleitung

Velleman

Velleman PI300M Bedienungsanleitung

Sungrow

Sungrow SG350HX-US Bedienungsanleitung

WilTec

WilTec 61897 Bedienungsanleitung

SMA

SMA SUNNY BOY STORAGE 2.5 Bedienungsanleitung

Simplicity

Simplicity LANDLORD 316 Bedienungsanleitung

Santak

Santak SMAX 3000 Bedienungsanleitung

ATON

ATON RA.Store-3 Bedienungsanleitung

ZIEHL-ABEGG

ZIEHL-ABEGG FXET4AMQ Bedienungsanleitung

Tektronix

Tektronix CFG250 Bedienungsanleitung

Champion

Champion 200989 Bedienungsanleitung

Vanner

Vanner 20-500 Series Bedienungsanleitung

GE GEP Bedienungsanleitung

MULTIQUIP

MULTIQUIP GDP-5H Leitfaden

Astrel Group

Astrel Group Power Reducer Kurzanleitung

GoWISE

GoWISE PS1007 Bedienungsanleitung

Promate

Promate PM13500D ES Bedienungsanleitung

Mastervolt

Mastervolt WHISPER 3.5M3000 RPM Bedienungsanleitung