Weda W50 R Bedienungsanleitung

OPERATINGMANUAL

EDITION 1

WEDA W50 R

32 utg. 3 20091007

110 V / 230 V - 60Hz

230 V - 50Hz

WEDA W50 R

Table of Content

1 Weda Poolcleaner AB and Pool Vacuums

2 Delivery specications

3 Technical specications

4 Installation

5 Operating Instructions

6 Service and Maintenance

7 Control Box and Electrical schematics

WEDA W50 R

1.Weda Poolcleaner AB and Pool Vacuums

Weda Poolcleaner AB has produced pool vacuums for public pools since the mid-1970´s. Today the

products are distributed world wide through own subsidiaries and a distributor network.

The product program consists of fully-automatic or semi-automatic pool vacuums (pool cleaners) for all

kinds of public pools.

Today’s market puts a great demand on the pool vacuums since pools today are designed and built in

various shapes and forms and in a wide variety of sizes and depths. Pool types vary from regular swim-

ming pools to wave pools, lazy rivers etc.

Since there is a strong connection between chlorination levels in the pool water and the eciency of the

pool vacuuming it is very important to optimise the pool vacuum for each individual pool. This is not only

based on the pool size but factors like the number of users and environmental issues in and around the

pool play an important role.

Since there is a common demand to decrease the usage of chlorine in pools Weda strives to design

better and more exible pool vacuums so that we can optimize the vacuum for each pool and meet the

customers’ high demands.

The latest product in the Weda range is the W50 which is the smallest fully-automatic and semi-automatic

pool vacuum in the Weda range. It is still designed to meet the needs of large public pools with a large

amount of users. And it includes the Weda reliability and more than 30 years experience from pool-vacuum-

design, usage and servicing.

The automatic function is reached by using the latest laser detection system and the most up-to-date

PLC technology available. The W50 uses no moving parts for wall detection.

The fully-automatic function is combined with a remote control option that allows for fast and reliable

movement control all over the pool bottoms.

The W50 is oered in three dierent basic models: Beside the W50 R a standard version version and a “Super

Auto”version are available with the possibility to select a number of various cleaning programs.

We wish you many good years of reliable pool cleaning with your new W50.

Klas Lange, Managing Director

Weda Poolcleaner AB

WEDA W50 R

2. Delivery Specication

Pool Vacuum with 25 or 40 m (75 or 120 ft) oating cable (umbilical)

Filter bag, 120 micron mesh

Control Box for wall mounting with power cable

Four Channel radio remote control.

Tool kit

Manuals and other documentation

Optional equipment 1: Trolley for cleaner, control box and oating cable

Optional equipment 2: Hose discharge connection

3. Technical specications

3.1 Vacuum Cleaner

Length x width x height 26 x 20 x 12 inches 650 X 500 X 300 mm

Weight in air 62 lbs 28 kg

Weight in water 26 lbs 12 kg

Cleaning width 20 inches 500 mm

Maximum suction capacity 150 Gallons/min 600 l/mn

Speed 0.6 Feet/Second 0,2 m/s

Maximum Water temperature 110° F 40°C

Motor Single-phase 50/60 Hz 110/230 VAC

Power Consumption 1300 W

Max Noise level 70 dB

Water Protection IP 68

Filter bag PE 50/12 micron mesh

Sensor system 24 VDC 4 ea + (beach control) air sensor

One in each direction( Forward, Backward, left, rigth)

3.2 Control Box

Length x Width x Height 11 x 15 x 5 inches 270 X 380 X 120 mm

Water protection IP 67

Primary Voltage 110 V 230 V

Amperage primary side 10 A 4,9 A

Motor protection setting 15 A 5,9 A

Fuses 16 A 16 A

WEDA W50 R

3.3 Floating Cable (Umbilical)

Dimension and Length Ø 1 inch , 75 or 120 ft Ø25 mm, 25 or 40 m

4 .Installation

The vacuum cleaner must be connected through a Ground Fault Circuit Interrupter (GFCI) or Earth Leakage

Circuit Breaker (ELCB) or a Residual Current Device (RCD) having a rated residual operating current not excee-

ding 30 mA in accordance with EN 60335-2-41 or for the market valid laws and regulations

Before connecting to power make sure that the wall outlet has:

The correct voltage

The correct fuses

The correct frequency - 60 Hz and

A GFCI or ELCB or RCD with correct setting (see above)

The power supply cable (the cable from the control box to the wall outlet ) shall be connected in such

way that the control box cannot be pulled closer to the water than 2 meters (7 ft). This is normally ac-

hieved by cutting the power cable to the desired length before connecting the power plug (see also any

local restrictions since this may vary from location to location).

Read the manual and note the warning signs on the cleaner and on the control box.

WEDA W50 R

5 Operating Instructions

5.1 The control box

The control panel has the following controls and options:

Switch On/O (with light)

Switch Manual/automatic

On the bottom of the control box you nd:

The power cable connection (Connect via a GFCI or ELCB or RCD)

Reset for the over current protection

Reset button

The 16 pole plug for the oating cable (umbilical) is located on the right hand side of the control box.

WEDA W50 R

5.2 The radio remote control

The remote control overrides the automatic function

The remote control is a 4 channel radio transmitter with the

following control functions:

1. Forwards. Press once for forward movement

To STOP press forward button again or backward button.

2. Backwards. Press once for backward movement.

To STOP press backwards or forwards button.

3. Left Turn

4. Right Turn

To set the cleaner in manual mode use the switch on the control box.

When this is done the sensors are de-activeted.

5.3 Running the vacuum in the pool

First make sure that nobody is in the pool.

If the Trolley with the control box is used leave the Trolley at a minimum of 2 meters (7 ft) from the edge

of the pool (Check any local regulations that may apply).

Roll out the oating cable (umbilical) and stretch it out as straight as possible.

Check the electrical outlet to make sure that the voltage that will be used corresponds to that of the pool

vacuum. Make sure that the outlet is equipped with a GFCI, ELCB or RCD (See above). Contact a local electri-

cian if you have any hesitations about this prior to connecting the power cable!

Fit the lter on the vacuum.

Connect the Power cable.

Turn the power on and drive the cleaner carefully into the pool. It is important to place the oating cable

into the pool since it is cooled by the pool water. To avoid over heating do not drive the vacuum cleaner

out of the pool for more than 5 minutes per hour.

WEDA W50 R

5.4 Manual Cleaning

Make sure that the swich on the conrol box is set to manual.

Start by driving the pool vacuum around the walls in the pool and clean thereafter the entire pool bottom at

any pattern you may prefer.

5.5 Automatic Cleaning

Use the radio remote control to drive the pool vacuum to the selected starting position .

Five seconds after the last use of any button the cleaner goes back into automatic mode.

The cleaner works in fully automatic mode for three(3) hours.

The cleaner is controlled by the PLC in cooperation with laser and air sensors in combination with

built in timers

5.6 Recovering the W50 from the pool

Switch to manual mode on the control box.

Drive the vacuum towards the wall where it will be taken out of the pool.

Put down the radio remote control.

Pull the pool vacuum in the oating cable slowly towards you until you can reach the rope and later on grab it

in the handle bar.

Pull the W50 onto the pool side.

Drive the cleaner to its storage or onto the trolley.

Turn o the power and disconnect the power cable from the outlet.

Remove the lter bag and ush it with clean water. Allow it to dry o before next cleaning if possible.

Flush the cleaner with fresh water (also under the cover)

Look into the suction intake to make sure that no larger particles are caught in the pump.

WEDA W50 R

6 Service and Maintenance

6.1. Routine maintenance after use

Check that the drive tracks are free from obstacles like hair, chewing gum, rubber bands or whatever else that

may have got stuck there during cleaning.

Flush the cleaner with fresh water. Make sure to reach also under the cover.

Check the lenses in front of the sensors to make sure that they are clean.

Roll up the oating cable.

Clean the lter bag by turning it inside out. Flush with fresh water.

Allow the lter to dry o completely.

If the cleaning has been deeper than 5 meters (15 ft) add grease in the shaft seal after approximately

every 10th hour of cleaning. (see 6.2 for details).

6.2 Monthly service and maintenance (after approximately 200 hours)

Greasing of the shaft seal.

For vacuums working no deeper than 5 meters (15 ft) depths the shaft seal should be greased after

every 200 hours of cleaning. Use only food approved white grease Weda Part No WP 740388. Use the

grease gun supplied with the cleaner. Remove the side plate on the left side to reach the nozzle on the

vacuum. Remove the grease nozzle cap, x the gun to the nozzle and give approx 5 pushes with the

gun to add the correct amount of grease. Avoid overlling.

Dry o eventual grease that has leaked out and put the nozzle cap back on.

Check:

Drive track tension (see gure)

Brush drive belts (see gure)

General appearance of tracks and belts.

Make sure that there is no damage to the oating cable (umbilical)

6.3 Annual service and maintenance

Shall be performed by authorized Weda service personnel.

For details please refer to the Service Manual for Authorized Weda Service personnel.

WEDA W50 R

6.4 Replacing the drive tracks, brusharms and belts

Loosen the domed nuts (12) and lift o the covers (11).

Loosen the wheel bolts (4), the track tension bolts (9 and 10) and the front shaft (8).

Pull o the wheels and the tracks. Now the belts and the arms may be replaced.

Reassemble in reversed order.

Inhaltsverzeichnis

Andere Weda Schwimmbadroboter Handbücher

Weda

Weda W50 Bedienungsanleitung

Beliebte Schwimmbadroboter Handbücher anderer Marken

POOLGOODS

POOLGOODS PoolGobbler Pro Bedienungsanleitung

AREBOS

AREBOS AR-HE-BSR Produktinformationsblatt

Maytronics

Maytronics Dolphin POOL UP Bedienungsanleitung

iRobot

iRobot Verro 600 Bedienungsanleitung

Kokido

Kokido SKOOBA K535CBX/18/EU Bedienungsanleitung

Dolphin

Dolphin 2x2 Gyro Bedienungsanleitung

SmartPool

SmartPool Robo-Kleen PLUS Bedienungsanleitung

Brilix

Brilix BARACUDA Bedienungsanleitung

Aiper

Aiper Orca 1200 Pro Bedienungsanleitung

Hayward

Hayward Navigator Pro Bedienungsanleitung

Polaris

Polaris Vac-Sweep 380 Bedienungsanleitung

Pentair

Pentair Prowler 710 Bedienungsanleitung

BWT

BWT D500 Bedienungsanleitung

Kokido

Kokido xtrovac 70 Bedienungsanleitung

Pentair

Pentair RACER Bedienungsanleitung

Pentair

Pentair REBEL 2 Bedienungsanleitung

Zodiac

Zodiac VX55 4WD Bedienungsanleitung

SmartPool

SmartPool Robo Kleen Plus Bedienungsanleitung