Security mark in this manual
Warning: Nozzle is about 200℃， please don’t touch it before it’s cold
Warning: Please don’t put yourhand inside the 3D printer when it’s working.
Warning: Please assemble or knock down the machine, when the power adaptor
is disconnected
Warning: Don’t keep the machine unsupervised when it is working.
Warning: Please don’t use other material except 1.75mm PLA to print, or any
problem caused by it will be out of our guarantee range。
Warning: Socket should near machine, and easy to be shut down
Warning: Please shut down the power if 3D printer meet any urgency
