·Keep the indoor unit away from high temperature such as near an oven or under direct sunlight,
and high humidity such as bathroom and greenhouse.
·Do not install the indoor unit close to a television or position with strong jamming- the signals
the TV and the intercom use can be interfered with each other.
·Do not touch the unit with wet hands.
·Avoid throwing, dropping or hitting theunits.
·Clean the camera or screen with a soft cloth. Do not use detergent,thinner, volatile or corrossive
liquid.
·Do not expose the camera of the outdoor unit to direct sunlight.
·Use the product under the circumstance of barrier-free and no inteference.
·When a car or a motorbike passes by, the image may become blurred or be cut off due to the
interferenceof radio wave.
Caution
1.
To prevent damage, the adapter should be fastened on the wall according to
instruction.
2.
Power plug as a disconnecting device should be kept convenient to operate.
3.
.When connecting AC power wire, please finish the connection before plugging
1. in the power.
1. Press CALL button of outdoor unit to call. The doorbell will ring and the images of visitor will show on the
indoor unit. Press TALK to active the intercom. Press TALK again to hang up. Each talking time
lasts for about60s
2. Press UNLOCK button to release the electronic-lock.
3. Press GATE UNLOCK pentru a elibera încuietoarea po button to release the gate-lock.
4. Press MONITOR button to monitor and it can last 30s, or press again turn off. At the same time,
pess TALK button for intercommunication.
5. Press MELODY SELECTION .button to cycle through the different tones available for the doorbell in
the monitor mode
6. Use MELODY (H M L ) to adjust the loudness of the in-built speaker of the indoor unit, and use VOLUME
to adjust the volume of micrphone.
7. Use BRIGHTNESS and CONTRAST to adjust how bright the image appears and how
much color is in the image respectively.
