Wen 73011T Bedienungsanleitung

MECHANIC’S

ROLLING SEAT

Instruction Manual

IMPORTANT: Your new tool has been engineered and manufactured to WEN’s highest standards for dependability,

ease of operation, and operator safety. When properly cared for, this product will supply you years of rugged,

trouble-free performance. Pay close attention to the rules for safe operation, warnings, and cautions. If you use

your tool properly and for its intended purpose, you will enjoy years of safe, reliable service.

NEED HELP? CONTACT US!

Have product questions? Need technical support? Please feel free to contact us:

TECHSUPPOR[email protected]1-800-232-1195 (M-F 8AM-5PM CST)

For replacement parts and the most up-to-date instruction manuals, visit WENPRODUCTS.COM

MODEL 73011, 73011T

CONTENTS

WELCOME 3

Introduction ..................................................................................................... 3

Speciﬁcations................................................................................................... 3

SAFETY 4

General Safety Rules........................................................................................ 4

Impact Wrench Safety Warnings...................................................................... 6

Electrical Information....................................................................................... 7

Battery & Charger Safety Warnings ................................................................. 8

BEFORE OPERATING 10

Unpacking & Packing List...............................................................................10

Know Your Impact Wrench ............................................................................ 11

OPERATION & MAINTENANCE 11

Operation ....................................................................................................... 11

Maintenance....................................................................................................14

Troubleshooting Guide................................................................................... 15

Exploded View & Parts List.............................................................................16

Warranty Statement ........................................................................................18

To purchase accessories and replacement parts for your tool, visit WENPRODUCTS.COM

SPECIFICATIONS

INTRODUCTION

Thanks for purchasing the WEN Rolling Seat. We know you are excited to put your tool to work, but ﬁrst, please

take a moment to read through the manual. Safe operation of this tool requires that you read and understand this

operator’s manual and all the labels afﬁxed to the tool. This manual provides information regarding potential safety

concerns, as well as helpful assembly and operating instructions for your tool.

NOTE: The following safety information is not meant to cover all possible conditions and situations that may occur.

WEN reserves the right to change this product and speciﬁcations at any time without prior notice.

At WEN, we are continuously improving our products. If you ﬁnd that your tool does not exactly match this manual,

please visit wenproducts.com for the most up-to-date manual or contact our customer service at 1-800-232-1195.

Keep this manual available to all users during the entire life of the tool and review it frequently to maximize

safety for both yourself and others.

Indicates danger, warning, or caution. The safety symbols and the explanations with them deserve your

careful attention and understanding. Always follow the safety precautions to reduce the risk of ﬁre, electric shock

or personal injury. However, please note that these instructions and warnings are not substitutes for proper ac-

cident prevention measures.

Model Number 73011, 73011T

Maximum Capacity 250 Pounds (Evenly Distributed)

Casters 2.5 Inches

Product Dimensions 14-5/8 in. x 14-3/8 in. x 14-7/8 in.

Tool Tray Dimensions 13-3/8 in. x 11-3/4 in. x 15/16 in.

GENERAL SAFETY RULES

WORK AREA SAFETY

1. Keep work area clean and well lit. Cluttered or dark

areas invite accidents.

2. Do not operate power tools in explosive atmo-

spheres, such as in the presence of ﬂammable liquids,

gases or dust. Power tools create sparks which may ig-

nite the dust or fumes.

3. Keep children and bystanders away while operating

a power tool. Distractions can cause you to lose control.

ELECTRICAL SAFETY

1. Power tool plugs must match the outlet. Never mod-

ify the plug in any way. Do not use any adapter plugs

with earthed (grounded) power tools. Unmodiﬁed plugs

and matching outlets will reduce risk of electric shock.

2. Avoid body contact with earthed or grounded surfac-

es such as pipes, radiators, ranges and refrigerators.

There is an increased risk of electric shock if your body

is earthed or grounded.

3. Do not expose power tools to rain or wet conditions.

Water entering a power tool will increase the risk of elec-

tric shock.

4. Do not abuse the cord. Never use the cord for car-

rying, pulling or unplugging the power tool. Keep cord

away from heat, oil, sharp edges or moving parts.

Damaged or entangled cords increase the risk of electric

shock.

5. When operating a power tool outdoors, use an ex-

tension cord suitable for outdoor use. Use of a cord

suitable for outdoor use reduces the risk of electric

shock.

6. If operating a power tool in a damp location is un-

avoidable, use a ground fault circuit interrupter (GFCI)

protected supply. Use of a GFCI reduces the risk of elec-

tric shock.

PERSONAL SAFETY

1. Stay alert, watch what you are doing and use com-

mon sense when operating a power tool. Do not use a

power tool while you are tired or under the inﬂuence

of drugs, alcohol or medication. A moment of inatten-

tion while operating power tools may result in serious

personal injury.

2. Use personal protective equipment. Always wear

eye protection. Protective equipment such as a respira-

tory mask, non-skid safety shoes and hearing protection

used for appropriate conditions will reduce the risk of

personal injury.

3. Prevent unintentional starting. Ensure the switch is

in the off-position before connecting to power source

and/or battery pack, picking up or carrying the tool.

Carrying power tools with your ﬁnger on the switch or

energizing power tools that have the switch on invites

accidents.

4. Remove any adjusting key or wrench before turning

the power tool on. A wrench or a key left attached to a

rotating part of the power tool may result in personal

injury.

5. Do not overreach. Keep proper footing and balance

at all times. This enables better control of the power

tool in unexpected situations.

6. Dress properly. Do not wear loose clothing or jew-

elry. Keep your hair and clothing away from moving

parts. Loose clothes, jewelry or long hair can be caught

in moving parts.

Safety is a combination of common sense, staying alert and knowing how your item works. The term “power tool”

in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool.

SAVE THESE SAFETY INSTRUCTIONS.

WARNING! Read all safety warnings and all instructions. Failure to follow the warnings and instructions may

result in electric shock, ﬁre and/or serious injury.

GENERAL SAFETY RULES

7. If devices are provided for the connection of dust

extraction and collection facilities, ensure these are

connected and properly used. Use of dust collection

can reduce dust-related hazards.

POWER TOOL USE AND CARE

1. Do not force the power tool. Use the correct power

tool for your application. The correct power tool will

do the job better and safer at the rate for which it was

designed.

2. Do not use the power tool if the switch does not turn

it on and off. Any power tool that cannot be controlled

with the switch is dangerous and must be repaired.

3. Disconnect the plug from the power source and/or

the battery pack from the power tool before making

any adjustments, changing accessories, or storing

power tools. Such preventive safety measures reduce

the risk of starting the power tool accidentally.

4. Store idle power tools out of the reach of children

and do not allow persons unfamiliar with the power

tool or these instructions to operate the power tool.

Power tools are dangerous in the hands of untrained us-

ers.

5. Maintain power tools. Check for misalignment or

binding of moving parts, breakage of parts and any

other condition that may affect the power tool’s opera-

tion. If damaged, have the power tool repaired before

use. Many accidents are caused by poorly maintained

power tools.

6. Keep cutting tools sharp and clean. Properly main-

tained cutting tools with sharp cutting edges are less

likely to bind and are easier to control.

7. Use the power tool, accessories and tool bits, etc.

in accordance with these instructions, taking into ac-

count the working conditions and the work to be per-

formed. Use of the power tool for operations different

from those intended could result in a hazardous situa-

tion.

8. Use clamps to secure your workpiece to a stable

surface. Holding a workpiece by hand or using your

body to support it may lead to loss of control.

9. KEEP GUARDS IN PLACE and in working order.

SERVICE

1. Have your power tool serviced by a qualiﬁed repair

person using only identical replacement parts. This

will ensure that the safety of the power tool is main-

tained.

CALIFORNIA PROPOSITION 65 WARNING

Some dust created by power sanding, sawing, grinding,

drilling, and other construction activities may contain

chemicals, including lead, known to the State of Califor-

nia to cause cancer, birth defects, or other reproductive

harm. Wash hands after handling. Some examples of

these chemicals are:

• Lead from lead-based paints.

• Crystalline silica from bricks, cement, and other

masonry products.

• Arsenic and chromium from chemically treated

lumber.

Your risk from these exposures varies depending on

how often you do this type of work. To reduce your ex-

posure to these chemicals, work in a well-ventilated area

with approved safety equipment such as dust masks

specially designed to ﬁlter out microscopic particles.

Safety is a combination of common sense, staying alert and knowing how your item works. The term “power tool”

in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool.

SAVE THESE SAFETY INSTRUCTIONS.

WARNING! Read all safety warnings and all instructions. Failure to follow the warnings and instructions may

result in electric shock, ﬁre and/or serious injury.

No. Part No. Description Qty.

1 73011-01 Seat Cushion 1

2 73011-02 Support Frame 2

3 73011-03 Washer - 6 4

4 73011-04 Screw M6 x 40 4

5 73011-05 Nut M8 4

6 73011-06 Washer - 8 4

7 73011-07 Nut M8 4

8 73011-08 Washer - 10 4

9 73011-09 Base Frame 1

10 73011-10 2-1/2 in. Caster 4

11 73011-11 Bolt M8 x 60 4

12 73011-12 Tray 1

13 73011-13 Reinforcement Bar 2

ASSEMBLY & ADJUSTMENTS

ASSEMBLING THE ROLLING SEAT

1. Use the four larger M8x60 bolts (11), washers (6), and M8 nuts (5) to connect the two support frames (2) to the

tray (12) and the base frame (9).

2. Place reinforcement bars (13) across the support frames, aligning the holes to allow for screws.

3. Use the four M6x40 screws (4) and washers (3) to attach the seat cushion (1) to the aligned support frames and

reinforcement bars.

4. Attach the four casters (10) along the underside of the unit and secure them using ﬂat washers (8) and M8 nuts

(7).

5. Properly tighten all screws and nuts prior to operation.

EXPLODED VIEW & PARTS LIST

NOTE: Not all parts may be available for pur-

chase. Parts and accessories that wear down

over the course of normal use are not covered

under the warranty.

WARRANTY STATEMENT

WEN Products is committed to building tools that are dependable for years. Our warranties are consistent with this

commitment and our dedication to qualit

LIMITED WARRANTY OF WEN PRODUCTS FOR HOME USE

GRE

AT LAKES TECHNOLOGIES, LLC (“Seller”) warrants to the original purchaser only, that all WEN

consumer

power tools will be free from defects in material or workmanship during personal use for a period of two (2) years

used

for professional or commercial use. Purchaser has 30 days from the date of purchase to report missing or

damaged parts.

SELLER’S

SOLE OBLIGATION AND YOUR EXCLUSIVE REMEDY under this Limited Warranty and, to the extent per-

mitted

by law, any warranty or condition implied by law, shall be the replacement of parts, without charge, which a

defective

in material or workmanship and which have not been subjected to misuse, alteration, careless handling,

misrepai

r, abuse, neglect, normal wear and tear,

improper maintenance, or other conditions adversely affecting the

Product

or the component of the Product, whether by accident or intentionally, by persons other than Seller. To

make

a claim under this Limited Warranty, you must make sure to keep a copy of your proof of purchase that

clearly

dor

of Great Lakes Technologies, LLC. Purchasing through third party vendors, including but not limited to garage

sales,

pawn shops, resale shops, or any other secondhand merchant, voids the warranty included with this

product.

Contact [email protected] or 1-800-232-1195 with the following information to make arrangements:

your

shipping address, phone number, serial number, required part numbers, and proof of purchase. Damaged

defective parts and products may need to be sent to WEN before the replacements can be shipped out.

turning

a product for warranty service, the shipping charges must be prepaid by the purchaser. The product

must

shipped in its original container (or an equivalent), properly packed to withstand the hazards of shipment. The

product

must be fully insured with a copy of the proof of purchase enclosed. There must also be a description of

the

will be returned and shipped back to the pur

chaser at no charge for addresses within the contiguous United States.

THIS

LIMITED WARRANTY DOES NOT APPLY TO ITEMS THAT WEAR OUT FROM REGULAR USAGE OVER TIME,

INCLUDING

BELTS, BRUSHES, BLADES, BATTERIES, ETC. ANY IMPLIED WARRANTIES SHALL BE LIMITED IN

DUR

ATION TO TWO (2) YEARS FROM DATE OF PURCHASE. SOME STATES IN THE U.S. AND SOME CANADIAN

PROVINCES

DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMI-

TAT

ION MAY NOT APPLY TO YOU.

NO EVENT SHALL SELLER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING

BUT

NOT LIMITED TO LIABILITY FOR LOSS OF PROFITS) ARISING FROM THE SALE OR USE OF THIS PRODUCT.

SOME ST

ATES IN THE U.S. AND SOME CANADIAN PROVINCES DO NOT ALLOW THE EXCLUSION OR LIMITAT

ION

INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY

TO YOU.

THIS

LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS

WHICH

VARY FROM STATE TO STATE IN THE U.S., PROVINCE TO PROVINCE IN CANADA AND FROM COUNTRY

TO COUNT

RY.

THIS

LIMITED WARRANTY APPLIES ONLY TO ITEMS SOLD WITHIN THE UNITED STATES OF AMERICA, CANA-

AND THE COMMONWEALTH OF PUERTO RICO. FOR WARRANTY COVERAGE WITHIN OTHER

COUNTRIES,

CONT

ACT THE WEN CUSTOMER SUPPORT LINE. FOR WARRANTY PARTS OR PRODUCTS REPAIRED UNDER

ARRANTY SHIPPING TO ADDRESSES OUTSIDE OF THE CONTIGUOUS UNITED STATES, ADDITIONAL

SHIPPING

CHARGES MAY APPLY.

THANKS FOR

REMEMBERING

V. 2021.01.25

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Wen Serviceausrüstung Handbücher

Wen

Wen 73017T Bedienungsanleitung

Beliebte Serviceausrüstung Handbücher anderer Marken

CEMB

CEMB DWA1000CWAS Bedienungsanleitung

Invacare

Invacare TDX SP Montageanleitung

MAHLE

MAHLE AIR-NEX 9310 Bedienungsanleitung

Waeco

Waeco ASC 6300 G Bedienungsanleitung

Multipick

Multipick MHP II Bedienungsanleitung

FLO-DYNAMICS

FLO-DYNAMICS BrakeMate Jr Programmierhandbuch

BGS technic

BGS technic 70909 Bedienungsanleitung

EDS

EDS LeekSeeker 89R Bedienungsanleitung

BGS technic

BGS technic 9327 Bedienungsanleitung

Sealey

Sealey VS820 Bedienungsanleitung

OTC

OTC Genisys EVO Bedienungsanleitung

Slime

Slime 50122 Bedienungsanleitung

CAS

CAS LCH-TCR302 Bedienungsanleitung

Matco Tools

Matco Tools R325HU Bedienungsanleitung

Sealey

Sealey MS070CR Bedienungsanleitung

CLAS

CLAS EG 0332 Bedienungsanleitung

Boston

Boston AGS-200 Bedienungsanleitung

Slime

Slime 40080 Bedienungsanleitung