Wenglor ZAC5 PN0 Series Bedienungsanleitung
Operating instructions
ZAC5xPN0x
Ethernet Switches
EN
Translation of the Original Operating Instruction
Subject to change without notice
Available as PDF version only
Status: 22.01.2020
www.wenglor.com
2Table of Contents
Table of Contents
1. Proper Use 3
2. Safety Precautions 3
3. Approvals and IP Protection 3
4. Technical Data 4
4.1. Connection table ZAC50PN0x 5
4.2. Connection table ZAC51PN01 6
4.3. Housing Dimensions 7
4.3.1 ZAC5xxN01 7
4.3.2 ZAC50xN02 7
4.4. Complementary Products 8
5. Application Notes 12
6. Mounting Instructions 12
7. Initial Operation 12
7.1. System Structure 13
7.2. Power Cable 13
7.3. Functional Earth 14
7.4. Industrial Ethernet Cable 14
7.5. Industrial Ethernet Cable with Power over Ethernet 15
7.6. Connecting Digital Sensors and Actuators 15
7.7. Diagnosis 16
7.7.1 LED Display PROFINET Device (ZAC50PN0x) 16
7.7.2 LED Display PROFINET Device (ZAC51PN01) 17
7.8. Operation on a Controller 19
7.8.1 Overview of the modules for PROFINET 19
7.8.2 Detailed description of the modules for PROFINET devices 20
7.8.3 Diagnostic alarms 22
8. Web-based Configuration 23
8.1. Call up the Administration Interface 23
8.2. Overview page 26
8.3. Device settings 27
8.4. Industrial Ethernet Ports Settings 29
8.5. Digital I/O Ports Settings 30
9. Maintenance Instructions 31
10. Proper Disposal 31
11. EU Declaration of Conformity 31
3
Industrial Communication
1. Proper Use
This wenglor product must be used in accordance with the following functional principle:
Switch
A Switch is an active network component which distributes data to the corresponding addressees within a
network in a targeted fashion. wenglor switches are fitted optionally with additional Power over Ethernet tech-
nology. The power supply is integrated into existing network connection by means of Power over Ethernet. As
an addition to Industrial Ethernet, there are several digital inputs and outputs directly on the switch that can be
activated or evaluated via the network.
2. Safety Precautions
• This operating instruction is part of the product and must be kept during its entire service life.
• Read this operating instruction carefully before using the product.
• Installation, start-up and maintenance of this product has only to be carried out by trained personnel.
• Tampering with or modifying the product is not permissible.
• Protect the product against contamination during start-up.
• Not a safety component in accordance with the EU Machinery Directive.
3. Approvals and IP Protection
IND. CONT. EQ.
E480617
RoHS
4Technical Data
4. Technical Data
Order number ZAC50PN01 ZAC50PN02 ZAC51PN01
Supply voltage 18...32 V DC 18...32 V DC 18...32 V DC
Max. Current Consumption Device * 0.3 A 0.25 A 0.3 A
Max. Current Consumption System ** 2.2 A 2 A 0.3 A
max. PoE Capacity 30 W 25 W –
Temperature range –25...60 °C –25...60 °C –25...60 °C
Voltage drop switching outputs < 2.5 V < 2.5 V < 2.5 V
Max. Switching current switching
outputs 0.6 A 0.6 A 0.6 A
Max. total current of the
digital I/O ports 1A 1A 1A
Digital I/O ports short-circuit pro-
tected Yes Yes Yes
Digital I/O ports overload protected Yes Yes Yes
Digital I/O ports reverse polarity
protected Yes Yes Yes
Number of digital I/O ports 2 2 2
Housing material Aluminum Aluminum Aluminum
Protection class IP67 IP67 IP67
Type of connection power 7/8", 5-pin 7/8", 5-pin 7/8", 5-pin
Type of Connection Industrial
Ethernet Ports
M12×1, 4-pin,
D-coding
M12×1, 4-pin,
D-coding
M12×1, 4-pin,
D-coding
Type of Connection PoE Ports M12×1, 8-pin, type x M12×1, 8-pin, type x –
Type of Connection Digital I/O ports M12×1, 4-pin,
A-coding
M12×1, 4-pin,
A-coding
M12×1, 4-pin,
A-coding
Number of PoE ports 5 2 –
Number of Industrial Ethernet Ports 227
Number of Digital I/O ports 222
PoE Standard IEEE802.3af IEEE802.3af –
PoE Classes Class 0, 1, 2, 3 Class 0, 1, 2, 3 –
Baud Rate 10 Mbit/s / 100 Mbit/s 10 Mbit/s / 100 Mbit/s 10 Mbit/s / 100 Mbit/s
Transmission Mode Full / Half Duplex Full / Half Duplex Full / Half Duplex
Webserver Yes Yes Yes
Switch Mode Store & Forward Store & Forward Store & Forward
Managed Switch Yes Yes Yes
VLAN Prioritization Yes Yes Yes
Default IP 192.168.100.1 192.168.100.1 192.168.100.1
Auto-Crossover Yes Yes Yes
Auto-Negotiating Yes Yes Yes
Auto-Polarity Yes Yes Yes
* Maximum own power consumption of the product without additional loads
** Maximum own power consumption of the product with additional loads
Full assignment of all PoE ports (if available) without digital I/O ports
5
Industrial Communication
4.1. Connection table ZAC50PN0x
Function
Pin
1 TxD (+)
2 RxD (+)
3
4
Socket 2
In/
Out
TxD (−)
RxD (−)
Function
Pin
1
2 TxD (−)
3
4
5
6
7
8
Socket 1
In/
Out
PoE (+)
In
Out
In
Out
In
Suitable Plug:
Out
In
Out
Out
Out
Out
Out
Out
Out
TxD (+)
RxD (−)
RxD (+)
PoE (+)
PoE (−)
PoE (−)
www.wenglor.com
77
50
Suitable Plug: 51
Suitable Plug: 2
Suitable Plug: 7877
50
50
Socket 1
Socket 1
51
2
Socket 2
Socket 3
77
Socket 4
51
2
Socket 2
Socket 3
78
Socket 4
50
50
Socket 1
Socket 1
50
Socket 1
Function
Pin
1 +24 V DC
2 I/O
3
4
Socket 3
In/
Out
GND
I/O
Socket 4
5
Function
Pin
1 0 V DC
2 0 V DC
3
4+24 V DC USystem
5 +24 V DC UDigital I/O / Sensor
www.wenglor.com
52
50
Socket 1
51
Socket 2
2
Socket 3
78
Socket 4
50
Socket 1
51
Socket 2
2
Socket 3
77
Socket 4
6Technical Data
4.2. Connection table ZAC51PN01
www.wenglor.com
Function
Pin
1 TxD (+)
2 RxD (+)
3
4
Socket 2
In/
Out
TxD (−)
RxD (−)
Out
In
Out
In
Socket 3
Suitable Plug:
77
Function
Pin
1 +24 V DC
2 I/O
3
4
Socket 1
GND
I/O
Suitable Plug:
5
FunctionPin
1 0 V DC
2 0 V DC
3
4+24 V DC USystem
5 +24 V DC UDigital I/O / Sensor
51
7877
Suitable Plug: 2
54
51
51
Socket 2
Socket 2
51
2
Socket 2
Socket 1
77
Socket 3
51
Socket 2
51
51
Socket 2
Socket 2
51
2
Socket 2
Socket 1
78
Socket 3
7
Industrial Communication
4.3. Housing Dimensions
4.3.1 ZAC5xxN01
4.3.2 ZAC50xN02
8Technical Data
4.4. Complementary Products
Connection plug, 7/8", 5-pin Order number: ZAT77NN01
Suitable Plug:
77
S82
Connection socket, 7/8", 5-pin Order number: ZAB78NN01
Suitable Plug:
78
Connecting cable, 7/8", 5-pin Order number: ZAV78R201, Cable length: 2 m
Suitable Plug:
78
S76
S87
9
Industrial Communication
Connecting line, 7/8", 5-pin Order number: ZAS78R601, Cable length: 10 m
Suitable Plug:
78
S75
Connector Plug RJ45; 8-pin Order number: ZAT45NN01
Suitable Plug:
45
S48
Connection plug, M12×1; 8-pin Order number: ZAT50NN01
Suitable Plug:
50
S48
10 Technical Data
Connecting cable M12×1; 8-pin Order number: ZAV50R201, Cable length: 2 m
Order number: ZAV50R501, Cable length: 5 m
Suitable Plug:
50
S81
Order number: ZAV50R502, Cable length: 5 m
Suitable Plug:
50
S85
Connecting line M12×1, 8-pin Order number: ZAS50R601, Cable length: 10 m
Suitable Plug:
50
S85
Connection plug, M12×1, 4-pin Order number: ZAT51NN01
Suitable Plug:
51
S08
Dieses Handbuch passt für folgende Modelle
3
Inhaltsverzeichnis
Andere Wenglor Schalten Handbücher
