West Marine 2641272 Bedienungsanleitung

OWNER’S MANUAL

Marine Audio System

• PLL Synthesizer Stereo Radio

• Digital Compact Disc Player

• Automatically Memory Storing

• Fold Down Full Detachable Panel

• Auxiliary Input Function

• CD Changer Control

• Preset Equalization

• Remote Control

Model 2641272

Installation .....................................................................................................3

DIN Front-Mount (Method A) ..................................................................................3

Installing the unit ...............................................................................................3

Removing the unit .............................................................................................4

DIN Rear-Mount (Method B) ...................................................................................4

Using the Detachable Front Panel..........................................................................5

Wiring Connection ........................................................................................6

Operation .......................................................................................................7

General Operation ..................................................................................................7

Radio Operation......................................................................................................8

CD or CDC Operation.............................................................................................9

MP3 Operation......................................................................................................10

Remote Control...........................................................................................11

Specification................................................................................................12

Trouble Shooting.........................................................................................13

CONTENTS

Notes:

• Choose the mounting location where

the unit will not interfere with the

normal driving function of the driver.

• Before finally installing the unit,

connect the wiring temporarily and

make sure it is all connected up

properly and the unit and the system

work properly.

• Use only the parts included with the

unit to ensure proper installation.

The use of unauthorized parts can

cause malfunctions.

• Consult with your nearest dealer if

installation requires the drilling of holes

or other modifications of the vehicle.

• Install the unit where it does not get in

the driver’s way and cannot injure the

passenger if there is a sudden stop,

like an emergency stop.

• If installation angle exceeds 30˚ from

horizontal, the unit might not give its

optimum performance.

• Avoid installing the unit where it would

be subject to high temperature, such

as from direct sunlight, or from hot air,

from the heater, or where it would be

subject to dust, dirt or excessive

vibration.

DIN FRONT/REAR-MOUNT

This unit can be properly installed either

from “Front” (conventional DIN Front-

mount) or “Rear” (DIN Rear-mount

installation, utilizing threaded screw holes

at the sides of the unit chassis).

For details, refer to the following

illustrated installation methods.

DIN FRONT-MOUNT (Method A)

Installing the unit

1. Dashboard

2. Holder

After inserting the holder into the

dashboard, select the appropriate tab

according to the thickness of the

dashboard material and bend them

inwards to secure the holder in place.

3. Screw

1. Dashboard

2. Nut (5mm)

3. Spring washer

4. Screw (5 x 25mm)

5. Screw

6. Strap

Be sure to use the strap to secure the

back of the unit in place. The strap

can be bent by hand to the desired

angle.

7. Plain washer

30˚

(Fig. 1)

182

(Fig. 2)

INSTALLATION

Removing the unit

1. Frame

2. Insert fingers into the groove in the

front of frame and pull out to remove

the frame. (When reattaching the

frame, point the side with a groove

downwards and attach it.)

3. Lever

Insert the levers supplied with the unit

into the grooves at both sides of the

unit as shown in figure until they click.

Pulling the levers makes it possible to

remove the unit from the dashboard.

DIN REAR-MOUNT (Method B)

Installation using the screw holes on the

sides of the unit.

Fastening the unit to the factory radio

mounting bracket.

1. Select a position where the screw

holes of the bracket and the screw

holes of the main unit become aligned

(are fitted), and tighten the screws at

2 places on each side.

Use either truss screws (5 x 5mm) or

flush surface screw (4 x 5mm),

depending on the shape of the screw

holes in the bracket.

2. Screw

3. Factory radio mounting bracket

4. Dashboard or Console

Note: The mounting box, outer trim ring,

and half-sleeve are not used for method

B installation.

USING THE DETACHABLE FRONT PANEL

To Detach the Front Panel

1. Press the open button (OPEN), then

the front panel will be folded down.

2. Remove the front panel by pulling its

middle-hand outward.

3. For safekeeping, store the front panel

in the supplied protective case

immediately after being removed.

4. Push the front metal plate into the

main body. A ‘click’ sound should be

heard.

Protective Case

Front Panel

Open

To Reinstall the Front Panel

1. Push the front panel into the main

body. A ‘click’ sound should be

heard.

2. Note that if the front panel fails to lock

in position properly, press control

button may not function and display

may be missing some segments.

Pressing the OPEN button and then

reinstall the front panel again.

Precautions when Handling

1. Do not drop the front panel.

2. Do not put pressure on the display or

control buttons when detaching or

reinstalling the front panel.

3. Do not touch the contacts on the front

panel or on the main unit body. It may

result in poor electrical contact.

4. If any dirt or foreign substances

adhered on the contacts, they can be

removed with a clean and dry cloth.

5. Do not expose the front panel to high

temperatures or direct sunlight in

anywhere.

6. Keep away any volatile agents (e.g.

benzene, thinner, or insecticides) from

touching the surface of the front panel.

7. Do not attempt to disassemble the

front panel.

WIRING CONNECTION

GREEN

GREEN/BLACK

BROWN

BROWN/BLACK

VIOLET

VIOLET/BLACK

MAIN UNIT

GREY

GREY/BLACK

FRONT Lch

SPEAKER

REAR Lch

SPEAKER

FRONT Rch

SPEAKER

REAR Rch

SPEAKER

Rch RED

Lch WHITE

(GREY)

RCA CABLE

ANTENNA CONNECTOR

ORANGE

RED

BLACK

GROUND (B–)

MEMORY

BACK-UP

IGNITION

SWITCH (B+)

CD CHANGER

CONNECTOR SOCKET

OPERATION

14212019 22 23 24 26 6 215 1813

39182711 107

17 16

28 295 4

GENERAL OPERATION

• ON/OFF/ILLUMINATE

Switch on the unit by pressing any

button (Except OPEN button and

EJECT button). When system is on,

press /ILL button (9) shortly to

control the brightness of VFD. Press it

for several seconds to turn off the unit.

• FACEPLATE RELEASE

Press OPEN button (7) to detach the

removable faceplate.

• SOUND ADJUSTMENT

Press SEL button (10) shortly to select

the desired adjustment mode.

The adjustment mode will change in

the following order:

By pressing AUDIO CONTROL

button (11) or AUDIO CONTROL

button (12), it is possible to adjust the

desired sound quality.

• LOUDNESS

Press BND/LOU button (13) to

increase bass output and display will

show “LOUD”. Press it again to

release this function.

(Volume) (Bass) (Treble) (Balance) (Fader)

VOL BAS TRE BAL FAD

GENERAL OPERATION

• ON/OFF/ILLUMINATE

Switch on the unit by pressing any

button (Except OPEN button and

EJECT button). When system is on,

press /ILL button (9) shortly to

control the brightness of VFD. Press it

for several seconds to turn off the unit.

• FACEPLATE RELEASE

Press OPEN button (7) to detach the

removable faceplate.

• SOUND ADJUSTMENT

Press SEL button (10) shortly to select

the desired adjustment mode.

The adjustment mode will change in

the following order:

By pressing MULTI JOG button (11)

or MULTI JOG button (12), it is

possible to adjust the desired sound

quality.

(Volume) (Bass) (Treble) (Balance) (Fader)

VOL BAS TRE BAL FAD

OPERATION

• SET THE CLOCK

Press and hold DSP button (15), then

press the SKIP/MANU button (17)

to change minutes or SKIP/MANU

button (16) to change hours.

• SELECT MODE

Press MODE button (6) to choose

desired listening mode.

(e.g. radio mode to CD (MP3) mode to

CDC mode or AUX IN mode)

• MUTE

Press MUT button (3) to silence the

receiver. Press it again to release the

mode.

• LIQUID CRYSTAL DISPLAY (FOR

LCD VERSION ONLY)

VACUUM FLUORESCENT DISPLAY

(FPR VFD VERSION ONLY)

Exhibit current frequency and activated

functions on the display (25).

• EQUALIZATION

Press EQ button (8) to turn on

equalization function and to select

desired audio mode. There are four

kinds of mode as below:

• REMOTE SENSOR

Point the remote control handset to

the remote sensor IR (27).

Press the function keys on the handset

to control the system.

• AUXILIARY INPUT

The unit can be connected to a

portable audio player through the AUX

IN jack (26).

• FLASHING LED

If the front panel does not install in the

main unit, the LED (28) will be flashing.

• RESET

Reset button (29) is placed on the front

panel and must be activated with either

a ball point pen or thin metal object.

The reset button is to be activated for

the following reasons:

- Initial installation of the unit when all

wiring is completed.

- All the function buttons do not

operate.

- Error symbol on the display.

Note: If press RESET button (29), the

unit can’t work yet, please use a cotton

swab soaked in isopropyl alcohol to

clean the socket on the back of the

front panel.

RADIO OPERATION

• BAND SELECTION

At tuner mode, press BND/LOU button

(13) to select the desired band.

The reception band will change in the

following order:

• STATION SELECTION

Press SKIP/MANU button (16) or

SKIP/MANU button (17) shortly to

activate automatic seek function.

Press for several seconds until

“MANUAL” appeared on the display,

the manual tuning mode is selected.

If both buttons have not pressed for

several seconds, they will retune to

seek tuning mode and “AUTO”

appeared on the display.

• LOCAL/DISTANCE

Press LOC button (2) shortly to select

between local and distant stations.

Local setting for reception of strong

station, and a distant setting for

reception of weaker stations.

FLAT CLASSICS POP JAZZ EQ OFF

FM1 FM2 FM3 AM

• LOUDNESS

Press BND/LOU button (13) to

increase bass output and display will

show “LOUD”. Press it again to

release this function.

• SET THE CLOCK

Press and hold DSP button (15), then

press the SKIP/MANU button (17)

to change minutes or SKIP/MANU

button (16) to change hours.

• SELECT MODE

Press MODE button (6) to choose

desired listening mode.

(e.g. radio mode to CD (MP3) mode to

CDC mode)

• MUTE

Press MUT button (3) to silence the

receiver. Press it again to release the

mode.

• VACUUM FLUORESCENT DISPLAY

Exhibit current frequency and activated

functions on the display (25).

• EQUALIZATION

Press EQ button (8) to turn on

equalization function and to select

desired audio mode. There are four

kinds of mode as below:

• REMOTE SENSOR

Point the remote control handset to

the remote sensor IR (27).

Press the function keys on the handset

to control the system.

• AUXILIARY INPUT

The unit can be connected to a

portable audio player through the AUX

IN jack (26).

• FLASHING LED

If the front panel does not install in the

main unit, the LED (28) will be flashing.

• RESET

Reset button (29) is placed on the front

panel and must be activated with either

a ball point pen or thin metal object.

The reset button is to be activated for

the following reasons:

- Initial installation of the unit when all

wiring is completed.

- All the function buttons do not

operate.

- Error symbol on the display.

Note: If press RESET button (29), the

unit can’t work yet, please use a cotton

swab soaked in isopropyl alcohol to

clean the socket on the back of the

front panel.

RADIO OPERATION

• BAND SELECTION

At tuner mode, press BND/LOU button

(13) to select the desired band.

The reception band will change in the

following order:

• STATION SELECTION

Press SKIP/MANU button (16) or

SKIP/MANU button (17) shortly to

activate automatic seek function.

Press for several seconds until

“MANUAL” appeared on the display,

the manual tuning mode is selected.

If both buttons have not pressed for

several seconds, they will retune to

seek tuning mode and “AUTO”

appeared on the display.

• LOCAL/DISTANCE

Press LOC button (2) shortly to select

between local and distant stations.

Local setting for reception of strong

station, and a distant setting for

reception of weaker stations.

FM1 FM2 FM3 AM

FLAT CLASSICS POP JAZZ DSP OFF

This function is effect during AUTO

SEEK operation.

• MONO/STEREO

Press MON button (1) to select mono

or stereo mode. You can sometimes

improve reception of distant stations

by selection of mono operation

• AUTOMATICALLY MEMORY

STORING & PROGRAM SCANNING

- Automatic Memory Storing

Press AS/PS button (18) for several

seconds, the radio searches from

the current frequency and checks

the signal strength until one cycle

search is finished. And then 6

strongest stations are stored into the

corresponding preset number

button.

- Program Scanning

Press AS/PS button (18) shortly to

scan preset station. When the field

strength level is more than the

threshold level of stop level, the radio

is holding at that preset number for

several seconds with releasing mute,

then searches again.

• STATION STORING

Press any one of the preset buttons

(14) (M1 to M6) to select a station

which had been stored in the memory.

Press this button for several seconds,

current station is stored into the

number button.

CD OR CDC OPERATION

• SELECT TRACKS

During CD or CDC operation, press

SKIP/MANU button (17) or

SKIP/MANU button (16) to move

to the previous track or the following

track. Track number shows on display.

During CD or CDC operation, hold

SKIP/MANU button (17) or

SKIP/MANU button (16) to fast

reverse or fast forward. CD play starts

from when you release the button.

• PAUSE PLAYING

Press PAU button (19) to pause CD

player. Press it again to resume play.

• REPEAT THE SAME TRACK

During CD operation, press RPT

button (21) to continuously repeat the

same track. Press again to stop repeat.

During CDC operation, press RPT

button (21) shortly to continuously

repeat the same track. Press and hold

RPT button (21) for several seconds to

continuously repeat all tracks on the

current disc. Press it again to stop

repeat.

• PREVIEW ALL TRACKS

During CD operation, press SCN

button (20) to play first several seconds

of each track on the current disc.

Press again to stop intro and listen to

track.

During CDC operation, press SCN

button (20) shortly to play first several

seconds of each track on the current

disc. Press it for several seconds to

play first several seconds of the first

track on each disc in the CD magazine.

Press it again to stop intro and listen

to track.

• PLAY ALL TRACKS

During CD operation, press SHF

button (22) to play all tracks on CD in

random order. Press again to cancel

the function.

During CDC operation, press SHF

button (22) shortly to play all tracks on

the current disc. Press it for several

seconds to select a disc in random

and play the selected disc in random

order. Press it again to cancel the

function.

• SELECT DISC

During CDC operation, press D.DN

button (23) to select previous disc and

D.UP button (24) to select next disc.

OPERATION

Inhaltsverzeichnis

Andere West Marine Marine-Audio Handbücher

West Marine

West Marine 2641223 Bedienungsanleitung

Beliebte Marine-Audio Handbücher anderer Marken

ASA Electronics

ASA Electronics MSR180 Bedienungsanleitung

ETS

ETS STWI5-2 Bedienungsanleitung

Fusion

Fusion MS-RA205 Leitfaden

Infinity

Infinity Infinitesimal Series Bedienungsanleitung

Teledyne

Teledyne SeaBat UI Bedienungsanleitung

Altec Lansing

Altec Lansing 55-4A SPEAKER SYSTEM Bedienungsanleitung

Jensen

Jensen JMS2012 Bedienungsanleitung

The box

The box Pyrit 10A Bedienungsanleitung

Fusion

Fusion Apollo RA770 Bedienungsanleitung

Sony

Sony XS GT5725A Bedienungsanleitung

JL Audio

JL Audio M6-8IB-L Bedienungsanleitung

Polk Audio

Polk Audio PA450UM Bedienungsanleitung

Nady Audio

Nady Audio M-Cab MC-15 Gebrauchsanweisung

Fusion

Fusion MS-RA70 Bedienungsanleitung

Garmin

Garmin Fusion APOLLO RV-RA770 Bedienungsanleitung

Boss Audio Systems

Boss Audio Systems ATV25B Bedienungsanleitung

Polk Mono

Polk Mono UM1 Bedienungsanleitung

Garmin

Garmin Fusion Apollo MS-RA670 Bedienungsanleitung