Westcott 8001 Handbuch
Accessories
Page 1 of 1
Setup Instructions
Universal Clamp
Style Series: 8001
Description
A quick solution when an umbrella receptacle is not available.
Product Contains
[1] Hose Clamp
[1] Black Block with thumb screw
INSTRUCTIONS
NOTE: When attaching to a portable Strobe,
follow the above instructions for assembly and
choose the required Hose Clamp size for your
Strobe.
1. The hose clamp is to slide completely
around the front section of the lighting unit.
2. When in place, insert the Bracket under the
Hose Clamp (In the Harness Position)
3. Use a screwdriver to then tighten. Finally,
insert umbrella shaft through mount until
desired position is established, then tighten
Set Screw Knob.
NOTE: The Bracket Hose Clamp comes in a
variety of sizes up to 8” which is adaptable to
most shapes and can be purchased at your local
automotive supply or hardware stores. (Ideal
or Dixon clamps work best)
Inhaltsverzeichnis
Andere Westcott Kamerazubehör Handbücher
Westcott
Westcott 1876 Handbuch
Westcott
Westcott 1095 Handbuch
Westcott
Westcott drop Pro Bedienungsanleitung
Westcott
Westcott 1090 Handbuch
Westcott
Westcott 1874 Handbuch
Westcott
Westcott FJ-X2m Bedienungsanleitung
Westcott
Westcott 1872 Handbuch
Westcott
Westcott 1847 Handbuch
Westcott
Westcott 4805 Handbuch
Westcott
Westcott FJ-X2m Bedienungsanleitung
Westcott
Westcott 1851 Handbuch
Westcott
Westcott 1858 Handbuch
Westcott
Westcott 1855 Handbuch
Westcott
Westcott 1812 Handbuch
Westcott
Westcott 1821 Handbuch
Westcott
Westcott 1850 Handbuch
Westcott
Westcott 1822 Handbuch
Westcott
Westcott 1856 Handbuch
Westcott
Westcott 1809 Handbuch
Westcott
Westcott 1823 Handbuch
