WC-6 Operating Instructions
4
indefinitely with the charger plugged in, and should only be used as a ‘stop gap’ measure.
6. Safety - When operating the SPR-365 the operator must wear protective eyewear,
either the type included with the kit, or others that provide a reasonable level of Longwave
protection from the intense UV irradiance. The level of irradiance from the SPR-365 is
about 100 times more intense than the sun on a clear day! Do not point the SPR-365 at
anyone’s eyes as Retinal damage is virtually assured. Short exposure to indirect
irradiance of from the SPR-365 should be kept to a minimum, but acceptable eye
protection is appropriate industrial practice..
Warranty
Western Instruments warrants its products, against defects in materials and workmanship for a period
of 1 year from receipt by the end user. If Western Instruments receives notice of such defects during
the warranty period, Western Instruments will either, at it’s option, repair, replace, or condemn
products that prove to be defective. Consumable items, such as Batteries and bulbs are warranted
for 30 days, from receipt by the end user.
Any warranty is void if the unit has been modified in any way, or if it has been repaired by an
unauthorized agency. The end user agrees that any equipment’s disposition, when returned for
warranty work, is at the full discretion of Western Instruments as to whether a claim is under warranty,
or due to misuse. Western Instruments warranty shall overlook normal wear, however does not
include operation outside the environmental specification of the product. All warranty work is FOB
Western Instruments, and any returned units shall include a written description, by the end user, of
the fault.
Western Instruments makes no other warranty, either expressed or implied, with respect to this
product. Western Instruments specifically disclaims any liability arising form the use of this
equipment. For the correct use of the product, refer to the Operating Instructions, furthermore we
recommend instructional training to CGSB, ASNT, or other regulatory authority qualifications.
Western Instruments highly recommends the end user exercise all possible safety precautions,
including use of protective equipment, while operating this or other industrial equipment.
Specifications:
Wave Length: 365nm +/-5%, Longwave UV A
LED Type: Nichia, NC Series
Visible Light (380 - 780): < 0.1 foot-candles (1 LUX)
Charger Voltage: 110 to 240VAC 50 to 60 Hz
Charger Current: 0.8 Amps @ 115VAC
Battery Type: Nickel–Metal Hydride
Battery Voltage: 3.7 Volts DC:
Battery Capacity: 2600 mAmp-Hour
Pole Spacing: 0 – 11” (0 – 280mm)
Pole Cross Section 1” (5mm)
Weight: 6.5 Pounds (3.0 Kg)
