Whalen WMFP54HL-23 Bedienungsanleitung

THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION.

PLEASE READ AND KEEP FOR FUTURE REFERENCE.

Date 2018-06-22 Rev. 0001-A Factory: KONRIC

Layton Fireplace TV Stand

Model # WMFP54HL-23

# WMFP54HL-23E

ADULT ASSEMBLY REQUIRED

If you have any questions regarding assembly or if parts are missing, DO NOT return this item to the

store where it was purchased. Please call our customer service number and have your instructions

and parts list ready to provide the model name, part name or factory number:

866-942-5362

Pacific Standard Time: 8:30 a.m. - 4:30 p.m., Monday - Friday

Or visit our web site 24 hours a day, 7 days a week for product assistance at

www.whalenstyle.com

Or e-mail your request to parts@whalenfurniture.com

LOT NUMBER:

DATE PURCHASE

MANUFACTURER: Whalen Furniture Manufacturing

CATALOG: Layton Fireplace TV Stand

MODEL # WMFP54HL-23 / WMFP54HL-23E

MADE IN CHINA

How to adjust the European adjustable hinges on doors

Shipping may cause doors to go out of alignment. If you find that the doors need to be adjusted

slightly, turn the appropriate screw, as illustrated.

1. TO ADJUST DOOR FORWARD OR BACKWARD.

2. TO ADJUST DOOR TO RIGHT OR TO LEFT.

3. TO ADJUST DOOR UP OR DOWN.

M A X I M U M R E C O M M E N D E D W E I G H T L O A D S

MAXIMUM LOAD 50 lb. (22.7 kg)

FITS UP TO MOST 65” FLAT PANEL TVs

MAXIMUM LOAD 135 lb. (61.3 kg)

PLACE TV BEHIND THE STOPPER

THIS UNIT IS NOT INTENDED FOR USE WITH CRT TVS. USE ONLY WITH FLAT

PANEL TVS AND AUDIO/VIDEO EQUIPMENT MEETING RECOMMENDED SIZE AND WEIGHT LIMITS.

NEVER USE WITH LARGER/HEAVIER THAN RECOMMENDED FLAT PANEL TVS OR EQUIPMENT. TO

AVOID INSTABILITY, PLACE FLAT PANEL TV IN THE CENTRE OF THE UNIT; THE BASE OF THE

TELEVISION MUST BE ABLE TO REST ON THE SUPPORTING SURFACE OF THE UNIT WITHOUT

OVER-HANGING THE EDGES. IMPROPERLY POSITIONED FLAT PANEL TVS, OR FLAT PANEL TVS

OR OTHER EQUIPMENT THAT EXCEED RECOMMENDED SIZE AND WEIGHT LIMITS COULD FALL

OFF OR BREAK THE UNIT, CAUSING POSSIBLE SERIOUS INJURY.

IMPORTANT

Before you begin: Open, identify and count all parts prior to assembly. Lay out parts on a flat and non-

abrasive surface. You will need the parts identified on page 4 and 5 of this instruction manual.

NOTE: IT IS VERY IMPORTANT TO USE GLUE WITH DOWELS. EXCESS GLUE CAN BE WIPED

OFF WITH DAMP CLOTH.

Insert Dowel at least half way by tapping lightly with a rubber mallet IF NECESSARY.

CAM LOCK SYSTEM OPERATION

HOW THE KNOCK DOWN (KD) ASSEMBLY SYSTEM WORKS

1. Screw Cam Bolt into the pre-drilled small holes on panel. Connect both panels together; making

sure Cam Bolt goes into pre-drilled hole on the end of panel with Cam Lock.

2. Insert Cam Lock into pre-drilled large hole on panel. Make sure arrow on Cam Lock is pointed toward

Cam Bolt.

3. Once Cam Bolt is connected inside Cam Lock, take a Phillips screwdriver and tighten Cam Lock

clockwise.

4. Plug Cam Cap into the cross slot of the Cam Locks to conceal the cam.

You are now ready to assemble the KD unit.

Parts and Hardware List

Please read completely through the instructions and verify that all listed parts and hardware are present

before beginning assembly.

A- Top Panel (Qty. 1) B- Center Shelf (Qty. 1) C- Bottom Panel (Qty. 1)

D- Bottom Front Molding (Qty. 1) E- Bottom Back Stretcher (Qty. 1) F- Left Lower Side Panel (Qty. 1

)

G- Left Lower Partition Panel H- Right Lower Side Panel I- Right Lower Partition Panel

(Qty. 1) (Qty. 1) (Qty. 1)

J- Middle Crossbar (Qty. 1) K- Middle Left Stile (Qty. 1) L- Middle Right Stile (Qty. 1)

M- Upper Side Panel (Qty. 2) N- Upper Side Panel Molding (Qty. 2) O- Upper Partition Panel (Qty. 1)

P- Door Panel Q- Adjustable Shelf R- Upper Back Panel S- Lower Back Panel

(Qty. 2) (Qty. 2) (Qty. 1) (Qty. 2)

Parts and Hardware List

T- Stop Rail (Qty. 1) Fireplace Insert (Qty. 1) Remote Control with Battery (Qty. 1)

(1) Cam Lock (2) Cam Bolt (3) M8 x 30 mm Wood Dowel

(Qty. 49+2 extra) (Qty. 49+2 extra) (Qty. 44+2 extra)

(4) M3.5 x 15 mm Flat Head Screw (5) M4 x 50 mm Wood Screw (6) M3.5 x 15 mm Washer Head Screw

(Qty. 12+1 extra) (Qty. 4+1 extra) (Qty. 32+1 extra)

(7) Straight Metal Bracket (8) Shelf Support (9) Corner Connector

(Qty. 2) (Qty. 8+1 extra) (Qty. 2)

(10) Floor Leveler (11) Cam Lock Cover (12) Handle and Metal Plate

(Qty. 2) (Qty. 22+1 extra) (Qty. 2)

(13) Handle Bolt (Qty. 4) (14) Rubber Bumper (Qty. 4+1 extra) Glue (Qty. 2)

Touch-up Pen (Qty. 1) Tipping Restraint Hardware Kit (Qty. 2)

(Included in plastic bag)

Tools required: Phillips screwdriver and hammer (not provided).

Assembly Instructions

1. Unpack the unit and confirm that you have all the hardware and required parts. Assemble the unit on a

carpeted floor or the empty carton to avoid any scratch.

2. Securely screw the Cam Bolts (2) into the designated small holes on the Top Panel (A), the Center Shelf

(B), the Bottom Panel (C) and the Lower Side Panels (F and H) using a Phillips screwdriver, as shown

in the illustration.

Cam Bolt

(33 used in this step)

②

Assembly Instructions

3. Securely screw the Cam Bolts (2) into the designated small holes on the Lower Partition Panels (G and I)

and Upper Side Panel Moldings (N) as shown.

Cam Bolt

(10 used in this step)

②

Assembly Instructions

4. Align and attach one Upper Side Panel Molding (N) to one Upper Side Panel (M) with one 30 mm

Wood Dowel (3) and two Cam Locks (1) (Refer to page 3 on Cam Lock system operation supplement).

5. Repeat the same procedure to combine the other Upper Side Panel Molding (N) with the other Upper

Side Panel (M).

Wood Dowel

(2 used in this step)

③

x 2

Cam Lock

(4 used in this step)

①

Assembly Instructions

6. Align and attach the Middle Left Stile (K) to the Left Lower Partition Panel (G) by using two Wood

Dowels (3) and two Cam Locks (1).

7. Repeat the same procedure to attach the Middle Right Stile (L) to the Right Lower Partition Panel (I).

Wood Dowel

(4 used in this step)

③

Cam Lock

(4 used in this step)

①

Assembly Instructions

8. Align and attach the Middle Crossbar (J) to the Lower Partition Panels (G and I) by using two Wood

Dowels (3) and two Cam Locks (1).

Wood Dowel

(2 used in this step)

③

Cam Lock

(2 used in this step)

①

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere Whalen Kamin im Innenbereich Handbücher

Whalen

Whalen MNFP60PV26WT Bedienungsanleitung

Whalen

Whalen Glenmore WS03061226 Bedienungsanleitung

Whalen

Whalen WSF48FM23R-AO Bedienungsanleitung

Whalen

Whalen Bookcase Media Fireplace Bedienungsanleitung

Whalen

Whalen Evanston MNFP60ES26GA Bedienungsanleitung

Whalen

Whalen WSLWFP54-6 Bedienungsanleitung

Whalen

Whalen WH300-26C2D-RGBM Bedienungsanleitung

Whalen

Whalen Middleton WSF72WV26-DB Bedienungsanleitung

Whalen

Whalen WSF59AV26C-WH Bedienungsanleitung

Whalen

Whalen WS3060926FP Bedienungsanleitung

Whalen

Whalen Linwood MNFP48LW23IO Bedienungsanleitung

Whalen

Whalen WH100-23C2D-RD Bedienungsanleitung

Whalen

Whalen Linwood MNFP60LW26IO Bedienungsanleitung

Whalen

Whalen WMFP48EC-18 Bedienungsanleitung

Whalen

Whalen WSF61DL26C-AC Bedienungsanleitung

Whalen

Whalen SF122B-26A Bedienungsanleitung

Whalen

Whalen WMFP48FH-10-KD Bedienungsanleitung

Whalen

Whalen WSF72SH26C Bedienungsanleitung

Whalen

Whalen Shelby WSF36SY23C Bedienungsanleitung

Whalen

Whalen Barston WMFP48EC-25EP Bedienungsanleitung

Whalen

Whalen Millstead WSF60MS26GAO Bedienungsanleitung

Whalen

Whalen Ashton MNFP54AS-18 Bedienungsanleitung

Whalen

Whalen Middleton WSF60WV23-DB Bedienungsanleitung

Whalen

Whalen WSF54AL30R-AG Bedienungsanleitung

Beliebte Kamin im Innenbereich Handbücher anderer Marken

Brigantia

Brigantia 35-DVRS31N-2 Betriebsanleitung

Nordpeis

Nordpeis Bergen Bedienungsanleitung

Superior

Superior BCT2536TMN Bedienungsanleitung

Quadra-Fire

Quadra-Fire 5100I-GD-B Bedienungsanleitung

Renaissance

Renaissance RUMFORD 1000 Bedienungsanleitung

Lacunza

Lacunza IV-800 Bedienungsanleitung

Baxi

Baxi 940 Gebrauchsanweisung

Dru

Dru Maestro 60/2 Tall RCH Bedienungsanleitung

Diamond Fireglass

Diamond Fireglass SS-O22 Bedienungsanleitung

HearthStone

HearthStone Windsor Bay 8830 Programmierhandbuch

Napoleon

Napoleon ASCENT B42 Bedienungsanleitung

Enviro

Enviro E33GI Bedienungsanleitung

Smeg

Smeg L30 FABE Montageanleitung

KEDDY

KEDDY K700 Bedienungsanleitung

Godin

Godin 3451 Bedienungsanleitung

Jøtul

Jøtul Jotul GI 535 DV IPI New Harbor Bedienungsanleitung

Desa

Desa CCFPDFT Bedienungsanleitung

Miles Industries

Miles Industries Vogue 1300IRN Handbuch