Whalen BBAVCD60-1BR Bedienungsanleitung

THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION.

PLEASE READ AND KEEP FOR FUTURE REFERENCE.

Date 2018-05-28 Rev. 0001-A Factory: HECFUR

60" TV Console

Model # BBAVCD60-1BR

ADULT ASSEMBLY REQUIRED

If you have any questions regarding assembly or if parts are missing, DO NOT return this item to the

store where it was purchased. Please call our toll-free customer service number and have your

instructions and parts list ready to provide the model name, part name or factory number:

1-866-942-5362

Pacific Standard Time: 8:30 a.m. - 4:30 p.m., Monday - Friday

Or visit our website 24 H a day, 7 days a week for product assistance at

www.whalenfurniture.com

Or e-mail your request to: parts@whalenfurniture.com

LOT NUMBER:

DATE PURCHASE

MANUFACTURER: Whalen Furniture Manufacturing

CATALOG: 60" TV Console

MODEL # BBAVCD60-1BR

MADE IN CHINA

How to adjust the European adjustable hinges on doors

Shipping may cause doors to go out of alignment. If you find that the doors need to be adjusted slightly,

turn the appropriate screw, as illustrated.

1. TO ADJUST DOOR FORWARD OR BACKWARD.

2. TO ADJUST DOOR TO RIGHT OR TO LEFT.

3. TO ADJUST DOOR UP OR DOWN.

M A X I M U M R E C O M M E N D E D W E I G H T L O A D S

MAXIMUM LOAD 50 lb. (22.7 kg)

FITS UP TO MOST 70” FLAT PANEL TVs

MAXIMUM LOAD 135 lb. (61.3 kg)

PLACE TV BEHIND THE STOPPER

THIS UNIT IS NOT INTENDED FOR USE WITH CRT TVS. USE ONLY WITH FLAT

PANEL TVS AND AUDIO/VIDEO EQUIPMENT MEETING RECOMMENDED SIZE AND WEIGHT

LIMITS. NEVER USE WITH LARGER/HEAVIER THAN RECOMMENDED FLAT PANEL TVS OR

EQUIPMENT. TO AVOID INSTABILITY, PLACE FLAT PANEL TV IN THE CENTER OF THE UNIT; THE

BASE OF THE TELEVISION MUST BE ABLE TO REST ON THE SUPPORTING SURFACE OF THE

UNIT WITHOUT OVER-HANGING THE EDGES. IMPROPERLY POSITIONED FLAT PANEL TVS, OR

FLAT PANEL TVS INCLUDING OTHER EQUIPMENT THAT EXCEED RECOMMENDED SIZE AND

WEIGHT LIMITS COULD FALL OFF OR BREAK THE UNIT, CAUSING POSSIBLE SERIOUS INJURY.

IMPORTANT

Before you begin: Open, identify and count all parts prior to assembly. Lay out parts on a flat and non-

abrasive surface. You will need the parts identified on page 4 and 5 of this instruction manual.

NOTE: IT IS VERY IMPORTANT TO USE GLUE WITH DOWELS. EXCESS GLUE CAN BE WIPED

OFF WITH DAMP CLOTH.

Insert Dowel at least half way by tapping lightly with a rubber mallet IF NECESSARY.

CAM LOCK SYSTEM OPERATION

HOW THE KNOCK DOWN (KD) ASSEMBLY SYSTEM WORKS

1. Screw Cam Bolt into the pre-drilled small holes on panel. Connect both panels together; making

sure Cam Bolt goes into pre-drilled hole on the end of panel with Cam Lock.

2. Insert Cam Lock into pre-drilled large hole on panel. Make sure arrow on Cam Lock is pointed toward

Cam Bolt.

3. Once Cam Bolt is connected inside Cam Lock, take a Phillips screwdriver and tighten Cam Lock clockwise.

4. Plug Cam Cap into the cross slot of the Cam Locks to conceal the cam.

You are now ready to assemble the KD unit.

1 2 43

Parts and Hardware List

Please read completely through the instructions and verify that all listed parts and hardware are present

before beginning assembly.

A- Top Panel (Qty. 1) B- Bottom Panel (Qty. 1) C- Bottom Front Molding (Qty. 1)

D- Bottom Back Stretcher (Qty. 1) E- Fixed Shelf (Qty. 1) F- Middle Crossbar (Qty. 1)

G- Left Side Panel (Qty. 1) H- Left Partition Panel (Qty. 1) I- Right Side Panel (Qty. 1)

J- Right Partition Panel (Qty. 1) K- Left Door (Qty. 1) L- Right Door (Qty. 1)

M- Middle Door (Qty. 2) N- Small Adjustable Shelf (Qty. 4)

O- Large Adjustable Shelf (Qty. 1) P- Back Panel (Qty. 1)

Parts and Hardware List

Please read completely through the instructions and verify that all listed parts and hardware are present

before beginning assembly.

(1) Cam Lock (2) Cam Bolt (3) M8 x 30 mm Wood Dowel

(Qty. 29+1 extra) (Qty. 29+1 extra) (Qty. 30+1 extra)

(4) M3.5 x 15 mm Flat Head Screw (5) M4 x 50 mm Wood Screw (6) M3.5 x 15 mm Washer Head Screw

(Qty. 9+1 extra) (Qty. 4+1 extra) (Qty. 24+1 extra)

(7) Metal Plate (Qty. 1) (8) Shelf Support (Qty. 20+1 extra) (9) Angle Metal Bracket (Qty. 2)

(10) Floor Leveler (11) Cam Lock Cover (12) Handle

(Qty. 2) (Qty. 8+1 extra) (Qty. 4)

(13) Handle Bolt (Qty. 8) (14) Rubber Bumper (Qty. 6+1 extra) (15) Acrylic Stopper (Qty. 1)

Glue Touch-up Pen Tipping Restraint Hardware Kit (Qty. 2)

(Qty. 1) (Qty. 1) (Included in plastic bag)

Tools required: Phillips screwdriver (not provided).

Assembly Instructions

1. Unpack the unit and confirm that you have all the hardware and required parts. Assembly the unit on a

carpeted floor or the empty carton to avoid any scratch.

2. Securely screw the Cam Bolts (2) into the designated small holes on the Panels (A, B, G, H, I and J) and

the Middle Crossbar (F) using a Phillips screwdriver, as shown in the illustration.

3. Align and attach the Middle Crossbar (F) to the Fixed Shelf (E) with two Wood Dowels (3) and three

Cam Locks (1) (Refer to page 3 on Cam Lock system operation supplement). Tap in with a rubber

mallet, if necessary. Make sure that you use a small amount of glue with both ends of all dowels.

Assembly Instructions

4. With the pilot holes as a guide, fasten the Metal Plate (7) to the Middle Crossbar (F) with one 15 mm

Flat Head Screw (4).

5. Align and attach the Middle Crossbar assembly between the Partition Panels (H and J) with four Wood

Dowels (3) and four Cam Locks (1).

Assembly Instructions

6. Align and attach the Bottom Front Molding (C) to the Bottom Panel (B) with three Wood Dowels (3)

and four Cam Locks (1).

7. Repeat the same procedure to attach the Bottom Back Stretcher (D) to the Bottom Panel (B).

8. Glue four Wood Dowels (3) into the inner holes of the Partition Panels (H and J) and attach them to the

Bottom Panel (B) with four 50 mm Wood Screws (5).

Assembly Instructions

9. Glue six Wood Dowels (3) into the large holes of the assembled base at both ends.

10. Align the large holes on Left Side Panel (G) with the inserted Wood Dowels (3) on the assembled base.

Firmly press them together and fasten it in place by engaging three Cam Locks (1).

11. Repeat the previous step to attach Right Side Panel (I) at the other end.

12. With the pilot holes as a guide, align and attach two Angle Metal Brackets (9) to the front corners of the

assembled base, using four 15 mm Flat Head Screws (4) per bracket.

Assembly Instructions

13. Screw two Floor Levelers (10) into the threaded sockets on the Angle Metal Brackets (9) and set to the

correct height.

14. Attach the Top Panel (A) to the Side Panels (G and I) and the Partition Panels (H and J) with eight

Wood Dowels (3) and eight Cam Locks (1).

Inhaltsverzeichnis

Andere Whalen Musikmixer Handbücher

Whalen

Whalen BBXLGTS46DW Bedienungsanleitung

Beliebte Musikmixer Handbücher anderer Marken

Neve

Neve 8816 Bedienungsanleitung

Mackie

Mackie Onyx Analogue Mixer Bedienungsanleitung

Behringer

Behringer EUROPOWER PMP518M Bedienungsanleitung

Peavey

Peavey S-32 Sanctuary Series Bedienungsanleitung

Rane

Rane MP 4 Bedienungsanleitung

True

True T9 Touchscreen Console Bedienungsanleitung

Studiomaster

Studiomaster Air Pro 24 Bedienungsanleitung

Pioneer

Pioneer SVM 1000 - Audio/Video Mixer Bedienungsanleitung

Roland

Roland M-160 Bedienungsanleitung

Yamaha

Yamaha MR1642 Bedienungsanleitung

Ecler

Ecler MAC40v Bedienungsanleitung

Pioneer

Pioneer DJM 909 - Battle Mixer W/Effects Bedienungsanleitung

Veeder-Root

Veeder-Root TLS-350 Series Bedienungsanleitung

Alto

Alto APM80.QUAD Bedienungsanleitung

Omnitronic

Omnitronic PM-211 Bedienungsanleitung

SoundCraft

SoundCraft B400 Bedienungsanleitung

Roland

Roland SoundCanvas SC-8820 Bedienungsanleitung

CARVIN

CARVIN RX 1200 Bedienungsanleitung