Whalen Santa Fe SFKCWWR-T Bedienungsanleitung

THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION.

PLEASE READ AND KEEP FOR FUTURE REFERENCE.

Date 2017-03-07 Rev. 0001-C Factory: FOCIDI

Santa Fe Kitchen Cart with Wine Rack

Stock # SFKCWWR-T

ADULT ASSEMBLY REQUIRED

If you have any questions regarding assembly or if parts are missing, DO NOT return this item to the

store where it was purchased. Please call our customer service number and have your instructions and

parts list ready to provide the model name, part name or factory number:

866-942-5362

Pacific Standard Time: 8:30 a.m. - 4:30 p.m., Monday - Friday

Or visit our web site 24 hours a day, 7 days a week for product assistance at

www.whalenstyle.com

Or e-mail your request to parts@whalenfurniture.com

LOT NUMBER:

DATE PURCHASE

MANUFACTURER: Whalen Furniture Manufacturing

CATALOG: Santa Fe Kitchen Cart with Wine Rack (SFKCWWR-T)

MADE IN CHINA

1. Please read the Assembly Instructions prior to assembling the unit.

2. To avoid damage, assemble the unit on a sturdy, level and non-abrasive surface.

3. Keep all hardware part out of reach of children.

4. Please wait until all steps are completed before fully tightening bolts.

5. Make sure all bolts are tightly fastened before the unit is used.

MAXIMUM RECOMMENDED WEIGHT LOADS

GENERAL INFORMATION, TIPS

and

TRICKS

MAXIMUM LOAD 50 lb. (22.6 kg)

PLACE TV BEHIND THE STOPPER

FITS UP TO MOST 45"FLAT PANEL TVs

MAXIMUM LOAD 100 lb. (45.3 kg)

THIS UNIT IS NOT INTENDED FOR USE WITH CRT TVS. USE ONLY WITH

FLAT PANEL TVS AND AUDIO/VIDEO EQUIPMENT MEETING RECOMMENDED SIZE AND

WEIGHT LIMITS. NEVER USE WITH LARGER/HEAVIER THAN RECOMMENDED FLAT PANEL

TVS OR EQUIPMENT. TO AVOID INSTABILITY, PLACE FLAT PANEL TV IN THE CENTRE OF

THE UNIT; THE BASE OF THE TELEVISION MUST BE ABLE TO REST ON THE SUPPORTING

SURFACE OF THE UNIT WITHOUT OVER-HANGING THE EDGES. IMPROPERLY POSITIONED

FLAT PANEL TVS, OR FLAT PANEL TVS INCLUDING OTHER EQUIPMENT THAT EXCEED

RECOMMENDED SIZE AND WEIGHT LIMITS COULD FALL OFF OR BREAK THE UNIT,

CAUSING POSSIBLE SERIOUS INJURY.

Parts and Hardware List

Please read completely through the instructions and verify that all listed parts and hardware are present

before beginning assembly.

A- Top Panel (Qty. 1) B- Middle Shelf (Qty. 2)

C- Bottom Shelf with Wine Bottle Holder (Qty. 1) D- Side Frame (Qty. 2

)

E- Bottom Stretcher (Qty. 1)

F- Stop Rail (Qty. 1)

(1) 1/4" x 3/4" Bolt (2) 1/4" x 1-1/2" Bolt

(Qty. 8+1 extra) (Qty. 14+1 extra)

4 mm Hex Wrench Touch-up Pen Tipping Restraint Hardware Kit (2 sets)

(Qty. 1) (Qty. 1) (Included in plastic bag)

Tools required: Hex wrench (provided), Phillips screwdriver and hammer (not provided).

Assembly Instructions

NOTE: Please do not fully tighten all bolts until you finish assembling all parts. Once assembled, go back

and fully tighten all bolts. This will make the assembly easier.

1. Unpack the unit and confirm that you have all the hardware and required parts. Assembly the unit on a

carpeted floor or empty carton to avoid any scratch.

2. Position the Top Panel (A) upside down with the threaded inserts facing up.

3. Align and attach the Side Frames (D) to the Top Panel (A) with eight 3/4" bolts (1). DO NOT fully

tighten the bolts in this step.

1/4" x 3/4" Bolt

(8 used in this step)

①

Assembly Instructions

4. Attach the Bottom Stretcher (E) between the bottom rails of both Side Frames (D) with two 1-1/2” Bolts

(2). Tighten the bolts with the enclosed hex wrench. As shown.

1/4" x 1-1/2" Bolt

(2 used in this step)

②

Assembly Instructions

5. Flip over the assembled unit at its long edge.

6. Depend on the desired configuration, insert and fit the Bottom Shelf (C) onto the bottom rails of both

Side Frames (D) making sure the threaded inserts on Bottom Shelf align with the drilled holes on Side

Frames properly.

NOTE: The Bottom Shelf (C) is designed to be reversed as a Wine Rack.

Assembly Instructions

7. Fasten the Bottom Shelf (C) to the bottom rails of both Side Frames (D) with four 1-1/2" Bolts (2).

1/4" x 1-1/2" Bolt

(4 used in this step)

②

Assembly Instructions

8. Repeat the same procedure to attach the Middle Shelves (B) to the middle rails of Side Frames (D).

9. Ask for assistance to stand the assembled unit upright.

1/4" x 1-1/2" Bolt

(8 used in this step)

②

Assembly Instructions

NOTE: You must install the Strip Stopper to prevent the TV from tipping when placing your flat panel

television directly on the top panel.

10. Remove the paper backing from the Stop Rail (F), then properly align the Stop Rail with the top edge of the

stopper template on Top Panel (A). Press down on the Stop Rail to help adhesion.

11. Carefully remove the stopper template from the Top Panel (A).

Assembly Instructions

Tools required: Phillips screwdriver, power drill, 3/8” drill bit and rubber mallet.

12. Ask for assistance to position the unit at the desired location against a wall. Now, follow the

instructions printed on the plastic bag containing the Tipping Restraint Hardware to attach the tip-over

restraints to the unit and the wall.

NOTE: Young children can be seriously injured by tipping furniture. You must install the Tipping

Restraint Hardware with the unit to prevent the unit from tipping, causing any accidents or damage. The

tipping restraint is intended only as a deterrent, they are not a substitute for proper adult supervision.

The tipping restraint is not an earthquake restraint. If you wish to add the extra security of earthquake

restraints, they must be purchased and installed separately.

13. The unit is now ready for use. Be sure to position your Flat Panel TV in the center of the Top Panel (A),

behind the Stop Rail (F).

Inhaltsverzeichnis

Sprachen:

Andere Whalen Outdoor-Wagen Handbücher

Whalen

Whalen Santa Fe SFKCWMS Bedienungsanleitung

Beliebte Outdoor-Wagen Handbücher anderer Marken

Costway

Costway TH10057 Bedienungsanleitung

Vivo

Vivo CART-PC02S Bedienungsanleitung

Ergotron

Ergotron STYLEVIEW SV42-3162-1 Bedienungsanleitung

VEVOR

VEVOR SC01 Bedienungsanleitung

Carts Vermont

Carts Vermont 20 Bedienungsanleitung

Vivo

Vivo CART-PC01 Bedienungsanleitung

Costway

Costway TL0400 Bedienungsanleitung

XPOtool

XPOtool 30261 Bedienungsanleitung

Branick

Branick 130 Gebrauchs- und Pflegehandbuch

Anthro

Anthro PrinterCart Bedienungsanleitung

Westward

Westward 2CZY4 Service-Handbuch

Hupfer

Hupfer TTW/V Bedienungsanleitung

Gorilla Carts

Gorilla Carts GCR-10P Bedienungsanleitung

Numatic

Numatic EcoMatic EM-5 Bedienungsanleitung

Bosch

Bosch XL-Cart Montageanleitung

Tennsco

Tennsco Modular Cart Top Component Assembly Bedienungsanleitung

Makita

Makita DCU601 Bedienungsanleitung

Clam

Clam POLAR TRAILER HD MAX Bedienungsanleitung