Whirlpool ED22RQ Bedienungsanleitung

T&l ol@

46^

Home Appliances

Use&CareGuide

Exterior

moisture

control Light Model and

serial number

Meat drawer -

Meat drawer I

air control -

Leveling I

rollers

(not sh

NO-FROSTREFRIGERATOR-FREEZER

ED22RQ ED22DQ

with

THIRST@SHER’”

DlspenslngSystem

G/9&

Contents

Important Safety Instructions. ........

Before Using Your Refrigerator .......

Using Your Refrigerator. ..............

Setting the controls ...................

Changing the control settings. ..........

Exterior moisture control. ..............

Adjusting the refrigerator shelves .......

Adjusting the door bins ................

Adjusting the door bin glides. ...........

Removing the crispers and crisper cover.

Adjusting the crisper humidity control ....

Removing the meat drawer and cover. ...

Adjusting the meat drawer temperature .

Removing the snack bin ...............

Adjusting the wine rack. ...............

Removing the freezer baskets ..........

Changing the light bulbs ...............

Removing the base grille. ..............

THIRST CRUSHER’” dispensing system

Automatic ice maker ..................

Removing ice maker storage bin ........

Common ice maker problems ..........

Sounds you may hear .................

Energy saving tips ....................

Cleaning Your Refrigerator ...........

Food Storage Guide ..................

Caring For Your Refrigerator. .........

Vacation and moving care. .............

Power interruptions ...................

If You Need Service Or Assistance ....

Whirlpool Refrigerator Warranty. .....

01991 Whirlpool Corporation

Remove the Consumer Buy Guide Label, tape

and any inside labels (except the model and serial

number label) before using the refrigerator.

To remove any remaining glue:

Rub briskly with thumb to make a ball then

remove.

Soak area with liquid hand dishwashing

detergent before removing glue as described

above. Do not use sharp instruments, rubbing

alcohol, flammable fluids or abrasive cleaners.

These can damage the material. See “Important

Safety Instructions” on page 3.

NOTE: Do not remove any permanent instruction

labels inside your refrigerator. Do not remove the

Tech Sheet fastened under the refrigerator at

the front.

Thank you for buying a Whirlpool appliance.

Please complete and mail the Owner Regis-

tration Card provided with this product.

Then complete the form below. Have this informa-

tion ready if you need service or call with a

question.

Copy model and serial numbers from label

(see diagram on front cover) and purchase date

from sales slip.

Keep this book and sales slip together in a handy

place.

Model Number

Serial Number

Purchase Date

Service Company Phone Number

ImportantSafetyInstructions

To reduce the risk of fire, electrical shock, or injury when Using your

refrigerator, followbasic precautions including the following:

Read ail instructions before using the

refrigerator.

Child entrapment and suffocation

are not problems of the past. Junked

or abandoned refrigerators are still

dangerous...even if they will “just sit

in the garage a few days.”

if you are getting rid of your old

refrigerator, do it safely. Please read

the enclosed safety booklet from

the Association of Home Appliance

Manufacturers. Help prevent accidents.

Never allow children to operate, play

with, or crawl inside the refrigerator.

Never clean refrigerator parts with

flammable fluids. The fumes can create

a fire hazard or explosion.

. FOR YOUR SAFETY.

DO NOT STORE OR USE GASOLINE OR

OTHER FLAMMABLE VAPORS AND LIG-

UIDS IN THE VICINITY OF THIS OR ANY

OTHER APPLIANCE. THE FUMES CAN

CREATE A FIRE HAZARD OR EXPLOSION.

It is your responsibility to be sure your

refrigerator:

is installed and leveled on a floor that will hold

the weight, and in an area suitable for its size

and use.

is connected only to the proper kind of outlet,

with the correct electrical supply and ground-

ing. (Refer to the Electrical Requirements and

Grounding Instructions Sheet.)

is used only to clo what home refrigerators are

designed to do.

is not near an oven, radiator or other heat

source.

is properly maintained.

is out of the weather.

is used in an area where the room tempera-

ture will not fall below 55°F (13C).

is not used by anyone unable to operate

it properly.

is not loaded with iood before it has time to

get properly colid.

- SAVE THESE INSTRUCTIONS -

BeforeUsingYourRefrigerator

&prong grounding

type wall receptacle

Right to raise;

Left to lower

Front roller Use screwdriver

Lower

Clean it

Clean your refrigerator before using it. See

cleaning instructions on page 14.

Plug it in

Recommended Grounding Method

A 115 Volt, 60 Hz., AC only 15 or 20 ampere fused

and properly grounded electrical supply is

required. It is recommended that a separate circuit

serving only this appliance be provided. Use a re-

ceptacle which cannot be turned off with a switch

or pull chain. Do not use an extension cord.

See Electrical Requirements and Grounding

Instructions Sheet in your Literature Package.

220-230 VI50 HZ

ADAPTED TO

115 VI60 HZ

BY TRANSFORMER

Part NO. 1129492

Install properly

1. Allow ‘/2 inch (1.25 cm) space on each side

and at the top of the refrigerator for ease of

installation.

2. If the refrigerator ISto be against a wall, you

might want to leave extra space on the hinge

side closest to the wall so the door can be

opened wider.

3. The refrigerator back can be flush against

the wall.

4. Make sure ice maker water supply has been

connected. Refer to Installation Instructions.

Level refrigerator-freezer

Remove base grille. (See page 10.)

2. To raise front, turn screw in direction shown.

3. To lower front, turn screw in direction shown.

4. Check with level.

5. Replace base grille. (See page 10.)

UsingYourRefrigerator

REFRIGERATOR

Setting the controls

Controls for the refrigerator and freezer are in the

refrigerator. When the refrigerator is plugged in for

the first time:

1. Set the Refrigerator Control to 3.

2. Set the Freezer Control to 6.

Give the refrigerator time to cool down completely

before adding food. (This may take several hours.)

These settings should be about right for normal

household refrigerator usage.

The controls will be set about right when milk

or juice is as cold as you like and when ice cream

is firm.

Refrigerator Control adjustments range from

1to 5. Freezer Control adjustments range from

AtoC.

Changing the control settings

If you need to adjust temperatures in refrigerator or

freezer, use the settings listed in the chart below. If

you have questions, call our Consumer Assistance

Center number (see page 18).

Adjust the Refrigerator Control first.

Wait at least 24 hours between adjustments.

Then adjust the Freezer Control if needed.

CONDITION:

If Refrigerator

Section is

TOO WARM

If Freezer

Section is

TOO WARM

If Refrigerator

Section is

TOO COLD

REASON:

Door opened often

Large amount of food added

Room temperature too warm

Door opened often

Large amount of food added

Very cold room temperature

(can’t cycle often enough)

Controls not set correctly

for your conditions

RECOMMENDED

CONTROL SETTINGS:

Refrigerator 4

Fs-eezer A

Refrigerator 3

Fl-eezer C

Refrigerator 2

Freezer B

If ICE Isn’t

MADE FAST ENOUGH

If BOTH SECTIONS

are TOO WARM

Heavy ice usage

Very cold room temperature

(can? cycle often enough)

Door opened often

Large amount of food added

Very warm or very cold room

temperatures

Refrigerator 3

Freezer C

Refrigerator 4

Freezer B

Using Your Refrigerator

Continued

EXTERIOR

MOISTURE

CONTROL

OFF ON

Be careful when

handling glass items.

Exterior moisture control

The Exterior Moisture Control on the Control Con-

sole operates electric heaters around the door

openings. These heaters help keep moisture from

forming on the outside of the refrigerator.

1. Use the OFF setting when humidity is low.

2. Use the ON setting if moisture forms on the

outside of the refrigerator.

Adjusting the refrigerator shelves

Shelves can be adjusted to match the way you use

your refrigerator. Glass shelves are strong enough

to hold bottles, milk and other heavy food items.

To remove glass shelves:

Remove items from shelf.

2. Slide shelf out with an even, constant pull to

the stop.

3. Lift front and slide the rest of the way out.

To move shelf guides to new position:

1. Lift front of guide. Pull guide forward off rear

support. Repeat for other guide.

2. To replace guide, push guide onto rear support.

Push front of guide down onto support.

To replace glass shelves:

1. Guide rear of shelf into shelf guide.

2. Slide shelf into place.

Adjusting the door bins

To remove door bins:

Lift up bin.

2. Pull bin straight out.

To replace door bins:

1. Slide bin in above desired button.

2. Push down untrl it stops.

NOTE: Large bins are designed to fit in top portion

of refrigerator door only.

Adjusting the door bin glides

The door bin glides can be used to secure odd

shaped items or to separate other items.

Grasp glide.

2. Slide glide along bin.

ger *=- “a and pull again.

Lifl the cover

front, then

the back. ,

Pull out to

the stop, lift the

front and pull again.

Removing the crispers and crisper cover

To remove the crispers:

1. Slide the crisper straight out to the stop

2. Lift the front.

3. Slide the rest of the way out.

4. Replace in reverse order.

To remove the cover:

1. Lift front of cover off supports.

2. Lift out cover by pulling up and out

To replace the cover:

1. Fit back of cover in notch supports on walls

of refrigerator.

2. Lower into place.

NOTE: Glass cover will fit only above full width

crisper. Crisper(sl must be removed before

removing cover.

Adjusting the crisper humidity control

You can control the amount of humidity in the

moisture-sealed crisper.

1. The control

can

be adjusted to any setting

between LOW and HIGH.

2. LOW (open) lets moist air out of crisper for best

storage of fruits and vegetables with skins.

3. HIGH (closed) keeps moist air in the crisper for

best storage of fresh leafy vegetables.

Removing the meat drawer

and cover

To remove the meat drawer:

1. Slide the meat drawer out to the stop.

2. Lift the front.

3. Slide the drawer the rest of the way out.

4. Replace in reverse order.

To remove the cover:

1. Remove meat drawer and crispers.

2. Lift front of cover off supports,

3. Lift out cover by pulling up and out.

To replace the cover:

1. Fit back of cover in notch supports on walls

of refrigerator.

2. Lower into plac:e.

3. Replace meat drawer and crispers.

Using Your Refrigerator

Continued

tekperature.

Use control to /

adiust meat drawer

Pull out to the stop,

lifl the front

and pull again.

L Step 2

the stop,

Adjusting the meat drawer temperature

Cold air flows against the meat drawer through an

opening between the freezer and the refrigerator.

This helps keep the meat drawer colder than the

rest of the refrigerator.

Slide the control to let more or less cold air

through.

Removing the snack bin

To remove the snack bin:

Slide snack bin with an even, constant

motion straight out to the stop.

2. Lift the front.

3. Slide brn the rest of the way out.

4. Replace in reverse order.

Adjusting

the

wine rack

To move the wine rack:

1. Lift front of wine rack.

2. Pull rack off rear support.

3. Replace in reverse order.

Removing

the

freezer baskets

To remove a basket:

Slrde out to the stop.

2. Lift the front to clear the stop.

3. Slide out the rest of the way.

To replace a basket:

1. Place basket on the slides.

2. Make sure the wire stops clear the front

of the slides.

3. Slide basket in.

lifl the front

and pull again.

Changing the light bulbs

Electrical Shock Hazard

Before removing a light bulb, either unplug

the refrigerator or disconnect the electricity

leading to the refrigerator at the main power

supply. Failure to do so could result in elec-

trical shock or personal injury.

To change refrigerator light:

1. Disconnect refrigerator from power supply.

2. Reach behind the Control Console to find bulb.

3. Remove bulb.

4. Replace with a 40-watt tubular appliance bulb.

5. Reconnect to power supply.

To change crisper light:

1. Disconnect reirigerator from power supply.

2. Pull top of light shield forward until it snaps free.

3. Lower light shield to clear bottom supports.

4. Pull light shield straight out to remove.

5. Replace bulb with a 40-watt appliance bulb.

6. Replace light shield in reverse order.

7. Reconnect potter supply.

To change light below ice bin:

1. Disconnect relrigerator from power supply.

2. Push in sides loflight shield until it snaps free

3. Replace bulb with a 40-watt appliance bulb.

4. Replace the light shield.

5. Reconnect poNer supply.

To change dispenser light:

1. Disconnect refrigerator from power supply.

2. Reach the bull3 through the dispenser area.

3. Replace with a heavy-duty lo-watt bulb, which

can be purchased from your Whirlpool dealer.

4. Reconnect power supply.

NOTE: Not all commercial appliance bulbs will

fit your unit. Be sure to replace a bulb with one of

the same size and shape.

Using Your Refrigerator

Continued

Removing the base grille

To remove the grille:

1. Open the doors.

2. Pull grille out as shown.

3. Do not remove Tech Sheet fastened behlnd

gnlle.

To replace the grille:

1. Line up grille support tabs with metal clips.

2. Push firmly to snap into place.

3. Close the doors.

See cleaning instructions for defrost pan and

condenser coils on page 14.

THIRST CRUSHER u dispensing system

Personal Injury Hazard

Tumbling ice and pressure on a fragile glass

can break it. Do not use a fragile glass when

dispensing ice or water. Failure to do so

could result in personal injury or breakage.

To dispense ice:

1. For cubed ice, move Ice Selector Switch to

CUBE oosltlon.

For crushed ice, move Ice Selector Switch

to CRUSHED posItIon.

2. Press a sturdy glass against the ice dispenser

bar. Hold glass close to dispenser opening so

ice does not fall outside of glass.

3. Remove the glass to stop dispensing.

NOTE: The first few batches of ice may have an

off-taste from new plumbing and parts. Throw the

ice away.

Ice is dispensed from the ice maker storage bin

in the freezer. When the dispenser bar is pressed,

a trapdoor opens in a chute between the dis-

penser and the ice bin. Ice is moved from the bin

and falls through the chute. When the dispenser

bar is released, a buzzing sound may be heard for

a few seconds as the trapdoor closes.

The dispensing system will not operate when

the freezer door is open.

NOTE: Large amounts of cubed ice should be

taken from the bin, not through the dispenser.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Whirlpool Kühlschrank Handbücher

Whirlpool

Whirlpool ED2FHEXV Benutzerhandbuch

Whirlpool

Whirlpool W10730921A Bedienungsanleitung

Whirlpool

Whirlpool ET14JMXBN00 Bedienungsanleitung

Whirlpool

Whirlpool Gold GR9FHTXVS Handbuch

Whirlpool

Whirlpool ED2CHQXVB Montageanleitung

Whirlpool

Whirlpool ER2MHKXPL03 Bedienungsanleitung

Whirlpool

Whirlpool WRS342FIAM00 Bedienungsanleitung

Whirlpool

Whirlpool WRF757SDEM Bedienungsanleitung

Whirlpool

Whirlpool ADN203 C Bedienungsanleitung

Whirlpool

Whirlpool RT18HK Montageanleitung

Whirlpool

Whirlpool ET8WTKXVB00 Bedienungsanleitung

Whirlpool

Whirlpool EDZOZK Bedienungsanleitung

Whirlpool

Whirlpool ETl6JK Bedienungsanleitung

Whirlpool

Whirlpool ARC 4170/IX Bedienungsanleitung

Whirlpool

Whirlpool WF2B281 Installationsanleitung

Whirlpool

Whirlpool WRS311SDHT Bedienungsanleitung

Whirlpool

Whirlpool GT1SHTXMQ03 Bedienungsanleitung

Whirlpool

Whirlpool WAR449W Bedienungsanleitung

Whirlpool

Whirlpool BSNF 8999 PB Installations- und Betriebshandbuch

Whirlpool

Whirlpool ED19CK Bedienungsanleitung

Whirlpool

Whirlpool W10728476A Bedienungsanleitung

Whirlpool

Whirlpool WRX988SIBM Bedienungsanleitung

Whirlpool

Whirlpool Roper RS25AFXRD02 Bedienungsanleitung

Whirlpool

Whirlpool GSC25C4EYY Bedienungsanleitung

Beliebte Kühlschrank Handbücher anderer Marken

Bonnet Neve

Bonnet Neve SKYVIEW PLUS Bedienungsanleitung

Zanussi Electrolux

Zanussi Electrolux ZERB 8441 Bedienungsanleitung

Sharp

Sharp SJ-BA31IEXW2-EU Bedienungsanleitung

CORBERO

CORBERO CC2300MCW Bedienungsanleitung

KitchenAid

KitchenAid 2205264 Bedienungsanleitung

Stengel

Stengel KU 1101 A++ Bedienungsanleitung

NEFF

NEFF KI181 Series Bedienungsanleitung

Hoshizaki

Hoshizaki Reach-In Bedienungsanleitung

Amana

Amana ASD2524VES00 Bedienungsanleitung

BOMANN

BOMANN KGC 213 Bedienungsanleitung

Danby

Danby DAR044A1SLDD Montageanleitung

Samsung

Samsung RF323TE Bedienungsanleitung

Beko

Beko CSA31022 Bedienungsanleitung

IKEA

IKEA FROSTIG C 185 E Bedienungsanleitung

Electrolux

Electrolux ER 6821 D Bedienungsanleitung

True

True TS-28 Bedienungsanleitung

Frigidaire

Frigidaire FSC23R5DW9 Bedienungsanleitung

Beko

Beko LSP4579W Bedienungsanleitung