Whirlpool ED25SMIII Bedienungsanleitung

REFRIGERATOR-

FREEZER

4 1 Model ED25SMIII,, _

IS. Freezers. Reirlgetator.Freelers, Ice Makers. DIshwashers BullbIn Ovens and Surface Units. Ranges. MIcrowave Ovens. Trash Compaclors. Room Air Condllloners Dehumldlfl

(behind ice bin)

Please read this

Use and Care Guide

before you do anything else.. .

This booklet tells you how to start your refrig-

erator, clean it, move shelves and adjust con-

trols. It even tells you what new sounds to expect

from your refrigerator.

Treat your new refrigerator with care. Use it

only to do what home refrigerators are de-

signed to do.

Parts and features

Meat Pan with

Cold Control

Slide-Out

ode1

and Serial

Number Label

Copy your Model and Serial Numbers here., .

When you need service cx call with a question,

have this information ready:

Model Number

1. Complete

Model and Serial Numbers (from the

label located as shown).

Serial Number

2. Purchase date from sales slip

Purchase Date

Copy this information in these spaces. Keep this

book, your warranty and sales slip together in a

handy place.

Service Company and Telephone Number

1 Contents

Paae

Pacte

SAFETYFIRST ......................... - 3

Changing the Light Bulbs ............. -7

BEFOREYOU PLUG IT IN. ............... 3

Removing the Base Grille ............ 7

Install Properly ...................... 4 Cold Water and Ice Dispenser ........ 8

Level Refrigerator-Freezer ............ 4 Sounds You May Hear. ............... 10

Remove Sales Labels ................ 4 Energy Saving Tips, .................. 10

4’ Clean It ............................

4 CLEANING YOUR REFRIGERATOR......

ii Plugltln.. .......................... 4 Cleaning Chart ..................... 11

USING YOUR REFRIGERATOR........... 5 FOOD STORAGE GUIDE. ...............

Setting the Controls .................. 5 Storing Fresh Food ................... 12

Changing the Control Settings ........ 5 Freezing and Storing Frozen Foods .... 13

Power Saving Control ................

5 VACATION AND MOVING CARE .......

Adjusting Crisper Humidity Control ....

6 IF YOU NEEDSERVICEOR ASSISTANCE.

Adjusting Meat Pan Temperature ...... 6 I. Before Calling for Assistance ....... 17

Adjusting Refrigerator Shelves ........ 6 2. If You Need Assistance ............ 18

Removing Freezer Shelves ............ 6 3. If You Need Service ............... 18

Removing Freezer Basket ............ 6 4. If You Have a Problem ............. 18

Removing the Crisper, Meat Pan

and Covers ....................... 7

>-II- “¶xmws?~~r*d~.,~~~*~#~,-&~I %i. 111*,a : s*:tr......

01986 Whirlpool Corporation

Before you plug it in

IMPORTANT

Before using your refrigerator, you are personally

responsible for making sure that it...

is installed and leveled on a floor that will hold

the weight, and in an area suitable for its size

and use.

isconnected only to the right kind of outlet, with the

right electrical supply and grounding. (Refer to

your “Electrical Requirements and Grounding

Instructions:‘)

is used only for jobs expected of home re-

frigerators.

is not near an oven, radiator or other heat source.

is properly maintained.

is out of the weather.

isused in an area where the room temperature will

not fall below 55” F (13” C).

is not used by those who may not understand how

it should be used.

is not loaded with food before it has time to get

properly cold.

Install properly.. . Remove sales labels.. .

1. Allow % inch (1.25 cm) space on each side and at

the top of the refrigerator for ease of installation,

2. If the refrigerator is to be against a wall, you might

want to leave extra space so the door can be

opened wider

3. The refrigerator back can be flush against the wall.

m.wdaI I .I-i ‘_>. ‘< ,.

Level refrigerator-freezer.. .

Right to Raise;

Left to lower

I. Remove base grille [see page 7 ).

2. To raise front, turn each screw to the right.

3. To lower front, turn each screw to the left.

4. Check with level.

Remove the Consumer Buy Guide label, tape and

any

inside

labels before using the refrigerator

To remove any remaining glue:

1. Rub briskly with thumb to make a ball then remove.

2. Soak area with dishwashing detergent solution (1

teaspoon detergent in 1quart warm water) before

removing glue as described in step 1.

DO NOT USErubbing alcohol or flammable or

toxic solvents, such as acetone, gasoline, car-

bon tetmchloride, etc. These can damage the

material.

NOTE: DO NOT REMOVE ANY PERMANENT IN-

STRUCTION LABELS INSIDE YOUR REFRIGERATOR.

Do not remove the Tech Sheet fastened under

the refrigerator at the front.

* I. *+vI.?IyLW,I-wmmm”m,“&.C~*IIR*I,r*-L*.I:,*1*:*=

Clean your refrigerator

before using it.

See cleaning instructions

on pagell,

Clean it.. .

3-prong grounding

type wall receptacle,

Refrigerator

Power Cord

RECOMMENDED GROUNDING METHOD

A 115 Volt, 60 Hz., AC only 15 or 20 ampere fused

and properly grounded electrical supply is re-

quired. It is recommended that a separate circuit

serving only this appliance be provided.

Do not use an extension cord. Use a recep-

tacle which cannot be turned off with a switch

or pull chain.

See individual electrical require-

ments and grounding instruction sheet in your liter-

ature package.

Using your refrigerator

Temperature Control

Air Control

Air Outlet Power Saving Control

Setting the controls.. .

The Temperature Control is in the refrigerator and

the Air Control is In the freezer section When the

refrigerator is plugged in for the first time..

54@21 l95

1, Set the TEMPERA- 2. Set the AIR CON

TURE CONTROL to 3 TROL to 3.

Changing the control settings.. .

If you need to adjust temperatures In the refrrger-

ator or freezer, use the settrngs lIsted in the chart

below.

CONDITION :

If Refrrgerator

Section Is

TOO WARM

If Freezer

Section is

TOO WARM

QUESTIONS?

...call your If Refrigerator

COOL-LINE ’ Section is

service TOO COLD

assistance If ICE isn’t

telephone MADE FAST ENOUGH

number

(page 181 If BOTH SECTIONS

are TOO WARM

Give the refrigerator time to cool down com-

pletely before adding food.

[This may take sev-

eral hours )

These settings should be about right for

normal household refrigerator usage.

The controls will be set about rrght when milk or

juice IS as cold as you like and when ice cream

firm.

not block the air outlet on the control panel.

Blockrng It can slow the air movement needed to

keep temperatures at the level you set

Adjust the Temperature Control first

Wait at least 24 hours between adjustments.

Then adjust the Air Control, If needed. I

REASONS:

Door opened often

Large amount of food added

Room temperature too warm

Door opened often

Large amount of food added

Very cold room temperature

(can’t cycle often enough)

Controls not set correctly

for your conditrons

Heavy Ice usage

Very cold room temperature

[can’t cycle often enough)

Door opened often

Large amount of food added

Very warm or very cold

room temperatures

Power Saving Control.. .

The Power Saving Control

on the Control Con-

sole operates electnc heaters around the door

openrngs. These heaters help keep moisture from

forming on the outside of the refrigerator.

OFF

@elm

RECOMMENDED SETTINGS:

Temperature Control 4

Atr Control 3

Temperature Control 3

Air Control 4

Temperature Control

Air Control 3

Temperature Control 3

Air Control 4

Temperature Control 3

Arr Control

1 Use the “OFF” set-

ting when humidity

ISlow

2. Use the “0N”setting

if moisture forms

on the outside of the

refrigerator.

Adjusting crisper

Humidity Control.. .

You can control the amount of humidity In the mois-

ture-sealed crrsper

The control can be adjusted to any setting be-

tween LO and HI.

LO [open) lets moist

air out of crisper for

best storage of fruits

and vegetables

with skins.

(closed) keeps

moist air in the cris-

per for best storage

of fresh leafy vege-

tables.

Adjusting meat pan temperature.. .

Cold air flows against the

meat pan through an opening

between the freezer and the

refrrgerator. This helps keep the

meat pan colder than the rest

of the refrigerator

Set the control to let more or

less cold air through

Use Control to Adjust

Meat Pan Temperatures

Adjusting the refrigerator shelves...

Shelves can be adjusted to match the way you use

your refrigerator. Glass shelves are strong enough to

hold bottles, milk and other heave food Items

To remove door shelves:

Lift

and out

To replace:

Insert hooks into guides

on both sides.

Push down.

To replace:

1. Guide the rear hooks Into the slots in the shelf

supports.

2. Ilt up front of shelf until hooks drop into slot Lower

front of shelf to level position

Removing freezer shelves.. .

1 LII? front slightly.

2 Loft back off supports

3. Replace in reverse order.

Lltt the Front

Then the Back

Removing the freezer basket.. .

For proper air movement, keep the freezer basket

In place when the refrigerator is operating.

To remove the basket:

Slide out to the stop

Lift the front to clear the stop.

Slide out the rest of the way

To replace the basket:

Place basket on the slides.

Make sure the wire stops

clear the front of the slides.

Slide basket in.

Removing the crispeq meat pan and covers...

Covers are held in place by two pegs at the back

and two notched tabs in front.

1. Press front tabs out of the way.

2. Lift cover front.

3. Lift back off the pegs.

4. Replace in reverse order

To remove the crisper and meat pan:

1. Slide crisper and meat pan straight out to

2. Lift the front.

3. Slide the rest of the way out.

4. Replace in reverse order

To remove the covers:

Snap Back Into Place.

Changing the light bulbs.. .

WARNING: Before removing a light shield for

cleaning or for replaclng the bulb,

either unplug refrigerator or dlscon-

nect electrlclty leadlng to refrig-

erator at the main power supply.

Shock and InJury can occur If elec-

trlclty remains connected.

Pull Off the Dial;

Pull Out at the Bottom

Removing the basegrille...

1. Open the doors. -I II

light bulbs behind refrigerator and freezer con-

trol consoles:

1. Pull control knob straight off.

2. Pull bottom of control panel straight out.

3. Lift top of panel off supports.

4. Replace with a 40-watt appliance bulb.

5. Replace panel in reverse order.

light bulb behind ice maker:

1. Remove the ice bin [see ice maker instructions

page9 1,

2. Replace with a 40-watt appliance bulb.

3. Replace ice bin.

Dispenser light:

1. Reach the bulb through the dispenser area

2. Replace with a heavy-duty IO-watt bulb.

r Metal Clips

3. Do not removeTech sheet

faste

2. Pull grille outwards as shown. 1. Line up grille support tabs with metal clips

2. Push firmly to snap into place.

sned behind @le. 3. Close the doors.

Cold Water and Ice Dispenser...

FORICE:

Press a sturdy glass against the

ice dispenser bar. (Pressure and

tumbling can break a fragile

we the glass to stopglass.) Remc

dispensing.

The first few batches of ice from

the ice maker may have a bad

taste. Throw them away This

from new plumbing and parts.

FORCHILLEDWATER:

Press a

sturdy

glass against the

water dispenser bar. (Pressure

can break a fragile glass.) Re-

move the glass to stop

dispensing.

If the dispenser is not used reg-

ularly, dispense enough every

week to freshen the supply Allow

2-3 hours for chilling.

The small, heated tray beneath the dispenser is designed to evaporate small spills.

There is no drain in this tray. Do not pour water

into It.

Ice Is dlspemsed

from the ice maker storage bin

Chllled water

comes from a tank behind the

in the freezer. When the dispenser bar is pressed, a meat pan. It holds about 50 ounces (1.5 L).

trapdoor opens in a chute between the dispenser When the refrigerator is first hooked up, press the

and the ice bin. Ice is moved from the bin and falls water dispenser with a glass or a jar until you have

through the chute. When the dispenser bar is re- drawn and discarded 2 cr 3 quarts (1.9to 2.8 L).

leased, a faint buzzing sound may be heard for a

Only air will came out to start with.

The

water you

few seconds.

draw and discard will rinse the tank and pipes.

Allow about 24 hours to chill the first tankful.

Common Problems

PROBLEM

Dlspenser won’t

work.

Ice dlrpenser won’t

work.

Ice dlspenser stops

worklng.

Ott-taste or odor

In Ice.

CAUSE

Freezer door open.

Ice bin not properly installed.

Wrong ice in ice bin.

Ice dispenser bar held in too long.

Ice attracts airborne odors.

Old ice.

Water quality.

Foods not properly wrapped.

Ice bin and freezer may need

cleaning.

Plumbing to ice maker:

New ice maker.

SOLUTION

Close the freezer door.

Make sure bin is pushed all the way in.

l Use only ice crescents from Ice maker.

Other shapes won’t dispense properly.

Wait about 3 minutes for the dispenser motor

to reset.

Large amounts of ice should be taken from

the bin,

not through the dispenser.

Use rapidly or store in covered container:

Dump old ice and make new supply

Water containing minerals (such as sulfur]

may require a filter to remove.

Wrap properly See pages 13 and 14.

Clean freezer and ice bin. See Cleaning

Chart on page 11.

Follow installation instructions for proper ice

maker water supply hook-up.

The first few loads of ice from a new ice

maker may have an off-taste. Dump ice and

make new supply.

Plan to remove and empty the storage bln:

If the ice dispenser has not, or will not be used

week or more;

If a power failure causes ice in the bin to melt

freeze together;

If the ice dispenser is not used regularly.

TIPS

The dispensers will work only with the freezer

door closed.

The ice dispenser will work only if the bin is

pushed all the way in.

Use only Ice crescents trom the Ice maker.

Other shapes won’t dispense properly.

When you need more ice than a glass or

two, scoop it from the bin or remove the bin.

The dispenser motor may stop if the dis-

penser bar is held in too long. It will be ready

to run again in about 3 minutes.

Ice stored too long can go stale., .like water.

Throw it away.

Ice can shrink. Cold moving air slowly evap-

orates them. If you use ice often, you may

never notice the change.

Good water quality is important for good ice

quality. It is not recommended that the ice

maker be connected to a softened water sup-

ply. Water softener chemicals such as salt from

a malfunctioning softener can damage the

ice maker mold and lead to poor quality ice. If

a softened water supply cannot be avoided,

then it is important that the water softener be

well maintained and operating properly.

fora

and

1. Pull the covering panel out from the bottom and 2.

slide it to the rear. Lift the signal arm so it clicks into the OFF position.

Ice can still be dispensed, but no more will be made.

3. Lift the front of the storage brn It out

4 Empty the brn. Use hot or warm water to melt the

Ice

if necessary

Never use anythlng sharp

to break

up Ice in the bin. This can damage the btn and

dispenser mechanrsm.

5. Wash wrth mild detergent. Rinse well Do not use

harsh or abrasive cleansers or solvents.

6. When replacrng the bin, make sure it ISpushed in

all the way. Push the signal arm down to the ON

position to restart Ice praductron.

The night light

uses a heavy-duty IO-watt bulb. It

should last about 10,000 hours. When It burns out,

purchase another from your dealer.

Sounds you may hear.. .

‘5

Your new refrtgerator may make sounds that your old one didn’t

Because the sounds are new to you. you might be concerned about

’ ,c

them. Don’t be Most of the new sounds are normal. Hard surfaces like

the floor, walls and cabinets can make the sounds seem louder.

The following chart describes the kinds of sounds that might be new

to you, and what may be making them.

Possible Sounds:

Slight Hum, Soft Hiss:

Clicking or Snapping

Sounds:

Water Sounds:

Ice Maker Sounds:

-trickling water

-thud (clatter of ice)

Running Sounds:

Probable Causes:

You may hear the refrtgerator’s fan motor and moving air.

The defrost timer makes a definite clrck when the refrigerator stops runnrng. It

also makes a sound when the refrigerator starts.

When the refrtgerator stops running, you may hear gurgling in the tubing for a

few minutes after it stops. You may also hear defrost water running into the

defrost water pan

tf your refrigerator has an Ice maker, you may hear buzzing (from the water

valve], trickling water and the clatter of ice dumped Into the bin

Your refrigerator has a high-efficiency compressor and motor. It will run longer

than older designs It may even seem to run most of the time.

Energy saving tips...

You can help your refrigerator use less electricity

It ISa waste of electrlclty to set the refrigerator and

Check door gaskets for a tight seal Level the cabi- freezer to temperatures colder than they need to

net to be sure of a good seal be If Ice cream ISfirm In the freezer and drinks are

Clean the condenser

coil

regularly as cold as your family likes them, that’s cold enough.

Open the door as few times as possible Think about

Keep the Power Saving Control on OFF unless

what you need before You open the door. Get moisture forms on the refrigerator exterior

everything out at one time Keep foods organized

Make sure your refrigerator is not next to a heat

You won’t have to search for what you want source such as a range, water heater, furnace. radi-

Close door as soon as food is removed ator, or in direct sunlight.

Go ahead and fill up the refrigerator, but don’t over-

crowd it so air movement

blocked

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Whirlpool Kühlschrank Handbücher

Whirlpool

Whirlpool ED26MK Bedienungsanleitung

Whirlpool

Whirlpool ET12PC Bedienungsanleitung

Whirlpool

Whirlpool ED5VHEXVQ Montageanleitung

Whirlpool

Whirlpool ET18HT Bedienungsanleitung

Whirlpool

Whirlpool WRF560SEYW Bedienungsanleitung

Whirlpool

Whirlpool WF2T242 Bedienungsanleitung

Whirlpool

Whirlpool WRT579SMYM00 Bedienungsanleitung

Whirlpool

Whirlpool WF-L200V Bedienungsanleitung

Whirlpool

Whirlpool S26S5 DF Bedienungs- und Montageanleitung

Whirlpool

Whirlpool EC3JHAXRS Bedienungsanleitung

Whirlpool

Whirlpool WRID41T Bedienungsanleitung

Whirlpool

Whirlpool GSF26C5EXW Service-Handbuch

Whirlpool

Whirlpool ET8MHKXMT00 Fehlerbehebungshandbuch

Whirlpool

Whirlpool ARG 725/A Bedienungsanleitung

Whirlpool

Whirlpool GI7FVCXWQ01 Bedienungsanleitung

Whirlpool

Whirlpool ET8MHKXMB04 Bedienungsanleitung

Whirlpool

Whirlpool ET14CKXE Bedienungsanleitung

Whirlpool

Whirlpool 5GR2SHKXLS06 Bedienungsanleitung

Whirlpool

Whirlpool ET22DK Bedienungsanleitung

Whirlpool

Whirlpool SKT60 Series Bedienungsanleitung

Whirlpool

Whirlpool ARC 4360 IX Bedienungsanleitung

Whirlpool

Whirlpool WRT18YAWD Bedienungsanleitung

Whirlpool

Whirlpool WRT108TFYB Montageanleitung

Whirlpool

Whirlpool WRT314TFDW Bedienungsanleitung

Beliebte Kühlschrank Handbücher anderer Marken

Bonnet Neve

Bonnet Neve SKYVIEW PLUS Bedienungsanleitung

Zanussi Electrolux

Zanussi Electrolux ZERB 8441 Bedienungsanleitung

Sharp

Sharp SJ-BA31IEXW2-EU Bedienungsanleitung

CORBERO

CORBERO CC2300MCW Bedienungsanleitung

KitchenAid

KitchenAid 2205264 Bedienungsanleitung

Stengel

Stengel KU 1101 A++ Bedienungsanleitung

NEFF

NEFF KI181 Series Bedienungsanleitung

Hoshizaki

Hoshizaki Reach-In Bedienungsanleitung

Amana

Amana ASD2524VES00 Bedienungsanleitung

BOMANN

BOMANN KGC 213 Bedienungsanleitung

Danby

Danby DAR044A1SLDD Montageanleitung

Samsung

Samsung RF323TE Bedienungsanleitung

Beko

Beko CSA31022 Bedienungsanleitung

IKEA

IKEA FROSTIG C 185 E Bedienungsanleitung

Electrolux

Electrolux ER 6821 D Bedienungsanleitung

True

True TS-28 Bedienungsanleitung

Frigidaire

Frigidaire FSC23R5DW9 Bedienungsanleitung

Beko

Beko LSP4579W Bedienungsanleitung