Whistler GT-265Xi Bedienungsanleitung

OWNER’S MANUAL

GT-265Xi

LASER/RADAR DETECTOR

THE WHISTLER GROUP, INC.

CORPORATE HEADQUARTERS

3604 NW Frontage Rd.

Bentonville, AR 72712

TEL: 479.273.6012 FX: 479.273.2927

www.whistlergroup.com

gt-265ximan.qxp 1/17/2012 3:14 PM Page 1

INTRODUCTION

Dear Whistler Customer,

Whistler has added new features made specifically for the

International market. This model not only packs features

common with Whistler’s models but also includes the following

new features not found in USA models;

-Ka Narrow Mode

-Selectable Laser Segments (which include: TraffiPatrol XR,

Riegl, Jenoptik, Laveg, Truespeed and laser guns with

“Stealth” modes)

-X/K Filter mode.

- Ka Filter mode.

To utilize your unit to its full potential, we recommend reading

this entire manual or visit our FAQ page on our web site

www.whistlergroup.com.

Enjoy your new Whistler and please drive safely.

Sincerely,

The Whistler Group, Inc.

If you have questions concerning the

operation of this Whistler product please call:

CuSTOmer SeRVICE

479-273-6012

Monday - Friday • 8:00 am - 5:00 pm CT USA

or visit our website

www.whistlergroup.com

Please keep the receipt in a safe place.

You may register your product online

www.whistlergroup.com. For warranty

verification purposes, a copy of your dated

store receipt must still accompany any unit

sent in for warranty work. If the unit is

returned without a dated store receipt an

out of warranty service charge applies.

Note: Your warranty period begins at the

time of purchase. The warranty is validated

only by the dated store receipt! Now is the

time to record the serial number of the unit

in the space provided in the warranty section

of the manual.

gt-265ximan.qxp 1/17/2012 3:14 PM Page 3

TABLE OF CONTENTS TABLE OF CONTENTS

Radar/Laser Alerts ................................................................ 21

• Radar Alerts

• Laser Audio/Visual Alerts

• Pulse Protection®

Reset Features ........................................................................22

Care and Maintenance ..........................................................23

Troubleshooting Guide ................................................ 23 - 24

Speed Monitoring Technologies ................................ 25 - 28

• Are Detectors Legal?

• POP™ Mode

• Laser Facts

• Laser Tips

• Radar Facts

• Other Speed Detection Systems

• Radar Detector Detectors

FCC Information ................................................................... 28

Warranty Information................................................... 29 - 32

Specifications ......................................................................... 32

Accessories............................................................................. 33

Model Features Summary................................................ 4 - 5

Installation ...........................................................................6 - 9

• Mounting Guidelines

• Windshield Mounting

• Power Cord Connection

• Fuse Replacement

Operation ....................................................................... 10 - 20

• Power On and Self-Test

• Memory/Beep Confirmation

• Auto Level Adjustment

• Self-Test Quiet Mode

• Auto Quiet/Quiet Modes

• City/City 1/City2 Modes

• Highway Mode

• Signal Strength Display

• Alert Periscopes

• Dim/Dark Modes

• Vehicle Battery Saver Mode

• X/K Filter Mode

• Ka Filter Mode

• Setting Saver

• POP™ Mode Detection

• Ka Narrow Mode

• VG-2 Mode

• Selectable Laser

• Safety Warning System SWS

• Alert Priority

• Option Select Mode

• Stay Alert™

gt-265ximan.qxp 1/17/2012 3:14 PM Page 5

FEATURESFEATURES

Whistler’s ergonomic and user-friendly design provides a new level of

operating convenience. Special features include:

1. Bracket Release Button

– provides quick and easy release of the mounting

bracket.

2. Speaker

– provides distinct audio warnings for X, K, Ka band radar, Safety

Warning System, and laser.

3. Mounting Bracket Location

– slot holds mounting bracket firmly.

4. Radar Antenna

– compact, high-efficiency antenna receives radar signals.

5. Front Laser

– high gain optical lens provides increased sensitivity and field of

view for leading-edge laser detection.

6. Rear Laser

– an integrated optical waveguide provides superior detection

of laser signals transmitted from behind.

7. City Button

- reduces the annoyance of false alerts typically encountered in

urban driving areas.

8. Quiet Button

- pressing QUIET before a signal is detected engages Auto

Quiet Mode which automatically reduces the audio level after the initial warning to

a low audio level setting. Pressing QUIET during a radar/laser encounter

silences audio alerts, while allowing visual alerts to keep you informed.

9. Power / Volume Control

– turns the unit on/off and adjusts the audio level.

10. Dim / Dark

- engages Dim/Dark modes.

11. Menu Button

- enters Option Select Mode.

12. Numeric Icon Display

– combines icon display with a 7 segment digital display that

shows signal strength indication and Highway and City modes.

13. X-band Icon

- indicates the unit is receiving a X-band signal.

14. K-band Icon

- indicates the unit is receiving a K-band signal.

15. Ka-band Icon

- indicates the unit is receiving a Ka-band signal.

16. VIcon

- indicates that the unit is receiving a VG-2 signal.

17. LIcon

- indicates that the unit is receiving a laser signal.

18. Alert Periscopes

- provide an additional attention getting visual alert.

Feature Listings of GT-265Xi

13 14 15 16 17 12

gt-265ximan.qxp 1/17/2012 3:14 PM Page 7

INSTALLATIONINSTALLATION

Mounting Guidelines

•Mount the unit as low as possible near the center of the

windshield.

•Do not mount the unit behind wipers, ornaments,

mirrored sunscreens, etc. These obstructions have metal

surfaces which can affect radar and laser signals and

reduce critical warning time. (Regular tinted glass

does not affect reception).

•Some windshields have an Instaclear™or Electriclear™type

coating, which affect radar signals. Consult your dealer or the

owner’s manual supplied with your vehicle to determine

if your windshield has this coating.

• Avoid placing the unit in direct contact with the windshield.

• To reduce the possibility of theft, conceal the unit when

not in use.

IMPORTANT

: Make sure the unit is level

Windshield

Mounting

Windshield Mounting

•Install the two suction cups and rubber bumper onto the bracket

by fitting them into their holes.

•Press the suction cups onto the windshield at the location you

have chosen.

Important: Some newer cars have a plastic safety coating on the

inside of the windshield. The windshield bracket may leave

permanent marks on this type of surface. To find out if your vehicle

has this type of windshield, check the vehicle’s owner’s manual or

ask your dealer. We recommend that you do not leave the suction

cup bracket on the window in direct sunlight. If the detector is

removed, this may cause blistering of the dash in some

vehicles.

•Slide the detector onto the bracket until it locks into place.

•If necessary, the unit may be leveled by bending the windshield

bracket. Press the bracket release button and remove the

detector before bending.

Rubber

Bumper

gt-265ximan.qxp 1/17/2012 3:14 PM Page 9

INSTALLATION

Power Cord Connection

•Plug the small end of the power cord into the unit’s power jack.

•Plug the large end into the vehicle’s cigarette lighter socket.

Note:

Cord fits tightly into detector. When installing the cord,

expect some resistance.

Fuse Replacement

The lighter socket plug is equipped with a replaceable 2 amp,

3AG fuse located behind the silver tip. To replace the fuse,

carefully unscrew the tip of the plug.

Important:

Unscrew slowly. The tip contains a spring which

may fly out when disassembling. Insert the new fuse with the

spring and screw on the tip. With use, screw cap on plug may

loosen. Retighten occasionally.

gt-265ximan.qxp 1/17/2012 3:14 PM Page 11

OPERATION

Power On and Self-Test

Each time your Whistler detector is turned on, an automatic

self-test sequence confirms that the speaker, visual displays

are functional along with many of the saved settings. To

increase the volume, continue turning the volume knob.

Memory/Beep Confirmation

All features selected (except Stay Alert and Quiet) are

retained in memory. Each time a button is pressed one beep

confirms feature “on”, two beeps confirm feature “off”.

Audio Level Adjustment

To change the audio level:

•Move Power/Volume button back to increase audio

level.

•Move Power/Volume button forward to decrease

audio level.

Self-Test Quiet

Simply press the Quiet button during the self-test

sequence to cancel the self-test audio. This will not affect

radar/laser alerts. To restore the self-test audio, simply

press the Quiet button during the next self-test.

Auto Quiet Mode

Auto Quiet mode provides an alternate alert pattern

approximately 5 seconds after a radar or safety warning

system signal is detected followed by clicking. The clicking

will continue for as long as the detected signal is present

and for any new signal within 20 seconds. Auto Quiet mode

does not affect laser alerts.

•Press Quiet (before a signal is detected) to engage

Auto Quiet mode.

•Once the Auto Quiet mode is engaged, you may

cancel the audio alarm by pressing Quiet.

•Press Quiet (when the unit is not alarming) to cancel

Auto Quiet mode.

Quiet Mode

Quiet mode cancels audio during an alert and any new alert

within 20 seconds. After 20 seconds of no radar signal

detected, the audio alerts are restored.

•Press Quiet to cancel the audio.

•Press Quiet a second time during an alert to restore

the standard audio alert pattern.

gt-265ximan.qxp 1/17/2012 3:14 PM Page 13

OPERATION

1 = weak signal, 9 = strong signal

City/City 1/City 2 Modes

Whistler’s City Modes are designed to reduce the annoyance

of automatic door openers, intrusion alarms and other devices

which share frequencies with police radar. Generally, X band is

used for these devices.

•Press City to cancel Highway Mode and engage City

Mode. The display will switch from“H” to “C”.

• Press City again to enter City 1 Mode.

• Press City again to enter City 2 Mode.

Note:

The City 1 or City 2 numeric indicator only illuminated

briefly.

• Press City a fourth time to cancel City 2 Mode and

returns the unit to Highway Mode.

In City Mode, weak speed/safety radar signals give an initial

alarm of two beeps, and then remain quiet until the signal

becomes very strong. When the signal strength increases, two

additional beeps are provided. City 1 and City 2 Modes

operate the same as Highway Mode, but in City 1 Mode, only

the X band is lowered. In City 2 Mode, X-band is not

detected.

Caution: Some towns/small cities may still be using X band

radar. City Modes do not change the audio alert for laser.

Highway Mode

Highway mode provides full audio warnings any time radar (X,

K, Ka, and Safety Warning System - SWS) or laser signals are

detected, and is recommended for open road driving.

For more information on City and Highway modes, please visit

our FAQ page on our website: www.whistlergroup.com

Signal Strength Display

When a radar signal is detected the audio alerts have a geiger

counter-like pattern to help you determine the strength of the

radar source; the faster the beeping the stronger the radar

signal. At the same time the audio is reporting, the display

illuminates the band identification Icon and relative signal

strength from 1 to 9.

Alert Periscopes

Whistler’s Alert Periscopes provide an added attention getting

visual alert. The two extra LEDs flash on and off when the unit

alarms to provide a unique visual alert. This alert can be

programmed, through the Option Select Mode to:

1. flash for all alarms

2. remain on

3. turn LEDs off completely

gt-265ximan.qxp 1/17/2012 3:14 PM Page 15

OPERATIONOPERATION

Dim/Dark Modes

Dim/Dark Mode reduces the illumination of the display.

•Briefly press and release the Dark button to reduce

illumination to a Dim setting.

•Briefly press and release the Dark button a second time

engages Dark Mode. In Dark Mode, the display goes dark

for as long as a signal is being detected and for 20

seconds after, then the display returns to the dim setting.

Dim Modes can be engaged during an alert.

•Briefly press and release the Dark button a forth time to

restore full illumination to the display.

Vehicle Battery Saver Mode

The Vehicle Battery Saver Mode automatically shuts off the detector

after 6 hours

if the unit has constant power.

The timer is reset:

1. Each time the detector is turned off

2. The power cord is disconnected or power is removed

to the unit.

3. Any button is pressed before the timer has expired.

The detector will alert you with an audible and visual

warning before it shuts off.

During this warning you can reset the timer by pressing any

button. If the unit has automatically turned itself off, press

the Power button to turn the unit back on.

X/K Filter Mode

Recently, many new products operate on X or K band causing

nuisance alerts to radar detectors. Some of these are radar

based Traffic Monitoring Systems mounted to poles alongside

the highway and others are K Band Lane Change Assistants

and Blind Spot Detectors found on some automobiles. The

X/K Filter Mode offers a level of rejection to reduce false

alerts caused by these systems.

Ka Filter Mode

There are times when a radar detector in another vehicle, can

emit a frequency which can cause your detector to falsely

alert. The Ka Filter Mode minimizes the occurrences of these

false alerts.

See Option Selection Mode to change the filter settings.

Setting Saver

Setting Saver saves your personalized settings so that when the

detector is turned off and then on again, you do not have to

re-enter them.

POP™ Mode Alerts

Because POP™ Mode radar utilizes the same K or Ka band

frequencies, POP™ Mode Alerts will displayed as regular radar signals.

Display showing XK Filter 1 Mode Display showing Ka Filter 1 Mode

gt-265ximan.qxp 1/17/2012 3:14 PM Page 17

Segmented Selectable Laser Receiver

The laser validation windows are separated into segments

allowing for customization in your country.

Segment Pulse Rate

L 1 valid up to 900Hz

L 2 valid from 1100Hz - 2000Hz

L 3 valid from 2000Hz - 3000Hz

L 4 valid from 3000Hz - 4000Hz,

L c valid from 900Hz - 1100Hz

L t valid for the TraffiPatrol XR

The L c segment is an area known to have laser falsing from

some new vehicles with Laser Assisted Cruise Control (LACC).

This segment is defaulted to off. If vehicles in your country do

not have LACC systems, you may turn on this segment in

Option Select Mode.

If a segment is not required in your country, it is recommended

that you shut off the segment in Option Select Mode to

minimize the chance of false alerts caused by some non police

sources such as airports, laser assisted cruise control systems

and more.

OPERATION

Ka Narrow Mode

Many countries do not share the same Ka radar guns as the

USA. Having a radar detector that scans the complete Ka

band may not be necessary if your Country is only using

one or more of the following (34.0 or 34.3 GHz). See

Option Select Mode to engage Ka Narrow mode.

VG-2 Mode

See Option Select Mode to turn this feature on/off. When a

VG-2 signal is detected, the VG-2 alert is sounded and the

display flashes “VG-2”. After 3 seconds the audio is

canceled and the display no longer flashes. This cycle is

repeated if the VG-2 signal is detected again.

During the period a VG-2 signal is detected, a radar

signal cannot be detected.

However, because the VG-2 alert has confirmed that a

patrol car is nearby, you are already aware of the potential

for speed monitoring and can adjust your speed

accordingly. Laser detection is not affected while a VG-2

signal is detected. (See page 27 for more information)

Display showing Ka Narrow Mode

Display showing L 1 laser segment detection

Display showing VG-2 Alert

gt-265ximan.qxp 1/17/2012 3:14 PM Page 19

Inhaltsverzeichnis

Andere Whistler Radarwarngerät Handbücher

Whistler

Whistler 1610 Bedienungsanleitung

Whistler

Whistler RLC-100 Bedienungsanleitung

Whistler

Whistler 948 Bedienungsanleitung

Whistler

Whistler 1750 Bedienungsanleitung

Whistler

Whistler PRO-69Ru Bedienungsanleitung

Whistler

Whistler 1505 Bedienungsanleitung

Whistler

Whistler CR90 Bedienungsanleitung

Whistler

Whistler Cruisader Bedienungsanleitung

Whistler

Whistler XTR-338 Bedienungsanleitung

Whistler

Whistler LASER/RADAR DETECTOR Bedienungsanleitung

Whistler

Whistler 1650 Series Bedienungsanleitung

Whistler

Whistler CR85 Bedienungsanleitung

Whistler

Whistler CR73 Series Bedienungsanleitung

Whistler

Whistler TOTAL BAND PROTECTION 425 Bedienungsanleitung

Whistler

Whistler 1776 Bedienungsanleitung

Whistler

Whistler 1785A Bedienungsanleitung

Whistler

Whistler CR80 Bedienungsanleitung

Whistler

Whistler 1793 SE Bedienungsanleitung

Whistler

Whistler TOTAL BAND PROTECTION XTR-690 Bedienungsanleitung

Whistler

Whistler TOTAL BAND PROTECTION XTR-690 Bedienungsanleitung

Whistler

Whistler XTR-438 Bedienungsanleitung

Whistler

Whistler XTR-658 Bedienungsanleitung

Whistler

Whistler CR80 Bedienungsanleitung

Whistler

Whistler 3300 Bedienungsanleitung

Beliebte Radarwarngerät Handbücher anderer Marken

Cobra

Cobra XRS 9700 Bedienungsanleitung

Inforad

Inforad v3 Bedienungsanleitung

Cobra

Cobra ESD9200 Betriebsanleitung

Escort

Escort C65 Bedienungsanleitung

Escort

Escort max 360c Bedienungsanleitung

Cobra

Cobra SPX 7800BT Bedienungsanleitung

Cobra

Cobra XRS 9940 Bedienungsanleitung

Lowrance

Lowrance LRA-2400 Bedienungsanleitung

Cobra

Cobra ESD-9160 Bedienungsanleitung

Stinger

Stinger VIP Bedienungsanleitung

Cobra

Cobra XRS 9430 Bedienungsanleitung

Cobra

Cobra Pro 9680 Betriebsanleitung

Escort

Escort SmartRadar Bedienungsanleitung

Radenso

Radenso Pro M-Edition Bedienungsanleitung

Rocky Mountain

Rocky Mountain RMR-D250 Bedienungsanleitung

Cobra

Cobra XRS 9645 Bedienungsanleitung

Cobra

Cobra XRS 9730 Bedienungsanleitung

Cobra

Cobra XRS 9775 Bedienungsanleitung