Whites MATRIX 100 Bedienungsanleitung
1
3
Introduction
The Matrix “100” handheld metal detector is a world class security scanner. It was designed to
meet and exceed the needs and specifications in today’s security conscious world, and complies
with all National Institute of Justice standards for indoor/outdoor operations. The Matrix 100
utilizes the latest in electronic design while retaining a pleasing visual appearance. “Made in the
United States”, along with advanced technological features, is the hallmark of White’s Electronics.
The Matrix 100 is ISO9001/2000.
Purpose
The Matrix “100” handheld metal detector is designed to detect metal, primarily for security
applications. It is useful for a myriad of detection applications.
Table of Contents
Matrix 100 features
Front ................................................................................................................4
Back .................................................................................................................5
Top edge .........................................................................................................6
Bottom edge ...................................................................................................6
Mechanical drawing-metric dimensions ...................................................6
Battery door ...................................................................................................7
“ON/OFF” button ..................................................................................................8
Sensitivity control ...................................................................................................9
Volume control for earbud ..................................................................................10
Testing the scanner ...............................................................................................10
Battery life and ratings .........................................................................................11
Extreme temperature “optional” battery ..........................................................12
Battery installation ................................................................................................12
De-Sense button ....................................................................................................13
Earbud jack ............................................................................................................14
Earbud jack rubber plug ......................................................................................14
Lanyard ..................................................................................................................15
Scanning a person .................................................................................................15
Three year warranty .............................................................................................19
Specifications .........................................................................................................20
Accessories .............................................................................................................21
Security Detection Distributors ..........................................................................22
Contact information ..............................................................................Back cover
4
Features – Front view
ON/OFF button
Battery door
De-Sense button
Visual indicator LED
Audio speaker
ON/OFF light
Low battery indicator Lanyard
hole
5
Features – Back view
Battery
door
De-Sense button
Visual indicator LED
Scan Area
Sensitivity
control
access
hole
Volume
control
access
hole
Earbud jack with
rubber plug
Lanyard
hole
20 cm
6
Features - Top edge
Features - Bottom Edge
Mechanical Drawing-Metric Dimensions
De-Sense button
Scan Area
Visual indicator LED
Battery
door
Lanyard
hole
Scan Area
Battery
door
Earbud jack and
rubber plug
20 cm
20 cm
7
Features – Battery door
Battery door
Stylus
Battery polarization graphic
8
“ON/OFF” button
• There are three selections for the ON/OFF button: “On Audio”,
“On Vibrate”, “Off”.
• “On Audio” - press the ON/OFF button once. This will be followed by
a single, double or triple beep to indicate the current sensitivity
level setting and the green ON indicator light will emit a single flash
for low sensitivity, double flash for medium sensitivity or a triple flash
for high sensitivity.
• Turn the unit off by pressing the ON/OFF button once. The ON indicator
light will disappear.
• “ON Vibrate” - press the ON/OFF button rapidly twice. This will be
followed by a single vibration burst and the ON indicator light will
emit a single flash for low sensitivity, double flash for medium
sensitivity or a triple flash for high sensitivity. The audio alarm is
deactivated when the vibrate alarm is activated.
• Turn the unit off by pressing the ON/OFF button once. The ON indicator
light will disappear.
“On / Off” indicator light
“On / Off” button
Speaker
Earbud jack
9
Sensitivity control
The unit is preset, at the factory, to medium sensitivity. You can change
sensitivity to the low, medium or high level.* The Specifications list (page
20) shows the effect of the different sensitivity levels for detecting objects
of various sizes. Open the battery door and remove the stylus from inside
the battery door (see page 7). Use the stylus to press the sensitivity control
to cycle through the sensitivity levels, medium, high, low, etc. The unit will
beep or vibrate and will flash the red visual indicator to announce the new
sensitivity level:
One beep/vibration/flash = low sensitivity
Two beeps/vibrations/flashes = medium sensitivity
Three beeps/vibrations/flashes = high sensitivity
When the unit is turned off or the battery is removed, the sensitivity level
setting is retained in the memory.
Earbud volume
Stylus
Sensitivity
Visual indicator LED
De-Sense button
* To be determined by administration policy and supervisor control.
10
Volume control for the earbud
Press the volume control to cycle through the volume levels, medium, high,
low, etc. The unit will beep or vibrate and will flash the red visual indicator
to announce the new volume level:
One beep/vibration/flash = low volume
Two beeps/vibrations/flashes = medium volume
Three beeps/vibrations/flashes = high volume
When the earbud is plugged into the scanner, the audio speaker is
deactivated. When the unit is turned off or the battery is removed, the ear
bud volume level setting is retained in the memory.
Testing the scanner
• Turn on the scanner in the “On Audio” or “On Vibrate” mode.
• Pass the scanner over a metal test object to make sure that the LED, audio
alarm or the vibrate alarm are working properly. If the battery is fresh or
recently recharged (more than 7V), the LED next to the “ON/OFF” button
will produce a green light (See Page 8). If the battery is discharged to less
than 7V, the LED will produce a yellow light. It is recommended that you
replace the battery if the light is yellow.
Earbud volume
Sensitivity
Stylus
* To be determined by administration policy and supervisor control.
Inhaltsverzeichnis
Andere Whites Metalldetektor Handbücher
Whites
Whites Coinmaster 1000 Series 3 Bedienungsanleitung
Whites
Whites Treasuremaster PI 1000 Bedienungsanleitung
Whites
Whites Coinmaster Classic Bedienungsanleitung
Whites
Whites Coinmaster TR Technische Daten
Whites
Whites GOLD WE MASTER 66TR Bedienungsanleitung
Whites
Whites Coinmaster 2 TR/AM Bedienungsanleitung
Whites
Whites GMT Bedienungsanleitung
Whites
Whites Coinmaster 6000/Di Series 3 Bedienungsanleitung
Whites
Whites Goldmaster S-66 Bedienungsanleitung
Whites
Whites DFX Bedienungsanleitung
Whites
Whites Spectra VX3 Bedienungsanleitung
Whites
Whites Prizm 5G Bedienungsanleitung
Whites
Whites Sierra Super Trac Bedienungsanleitung
Whites
Whites MX Sport Bedienungsanleitung
Whites
Whites Coinmaster 3 TR-AM Bedienungsanleitung
Whites
Whites 6000 PRO XL Bedienungsanleitung
Whites
Whites The Classics Bedienungsanleitung
Whites
Whites Coinmaster 400 Series 2 Technische Daten
Whites
Whites Lawman L-2 Bedienungsanleitung
Whites
Whites Treasuremaster PI 3000 Bedienungsanleitung
Beliebte Metalldetektor Handbücher anderer Marken
Steinberg Systems
Steinberg Systems SBS-MD-22 Bedienungsanleitung
Zircon
Zircon MetalliScanner m60c Bedienungsanleitung
nalanda
nalanda MD027 Bedienungsanleitung
REV Ritter
REV Ritter CB-7005 Bedienungsanleitung
Minelab
Minelab F1A4 Bedienungsanleitung
Fisher Research Labs
Fisher Research Labs F70 Bedienungsanleitung
Steinberg Systems
Steinberg Systems SBS-MD-12 Bedienungsanleitung
GOLDEN MASK
GOLDEN MASK 5 Bedienungsanleitung
Grizzly
Grizzly YM 203 Bedienungsanleitung
Fisher Research Labs
Fisher Research Labs 1280-X Aquanaut Bedienungsanleitung
Treasure Cove
Treasure Cove Vibra-Probe 560 Bedienungsanleitung
Accurate Locators
Accurate Locators XL16 IMAGER Bedienungsanleitung