Part Number: A9-000-0064-1 Rev. 1.1
Product Models USB 3.1 WriteBlocker
Interface Types & Speeds USB Type-A: up to 5 Gbps (uses the USB 3.0 transfer mode)
USB Type-C: up to 10 Gbps (uses the USB 3.1 Gen 2 transfer mode)
Supported Drive Types External data devices with USB Type-A or Type-C connectors
Source Side Data Connectors One (1) USB Type-A connector
Two (2) USB Type-C connectors
Host Side Data Connectors One (1) USB Type-C connector
Supported Operating Systems Windows 10 and 8.1
Compliance EMI Standard: FCC Part 15 Class A
EMC Standard: EN55024, EN55032
CE, RoHS, RCM
Product Weight 0.13 pounds (0.06 kg)
Product Dimensions 2.05in W x 3.42in L x 1.03in H (52mm W x 97mm L x 26mm H)
Technical Support Your investment in CRU products is backed up by our free technical support for
the lifetime of the product. Contact us through our website, cru-inc.com/support or
call us at 1-800-260-9800 or +1-360-816-1800.
©2018 CRU Acquisition Group LLC, ALL RIGHTS RESERVED. CRU®, WiebeTech®, and Protecting Your Data™ are trademarks of CRU Acqui-
sition Group, LLC and are protected by trademark law.
Product Warranty
CRU warrants this product to be free of significant defects in material and workmanship for a period of three years from the original date of
purchase. CRU’s warranty is nontransferable and is limited to the original purchaser.
Limitation of Liability
The warranties set forth in this agreement replace all other warranties. CRU expressly disclaims all other warranties, including but not limited
to, the implied warranties of merchantability and fitness for a particular purpose and non-infringement of third-party rights with respect to the
documentation and hardware. No CRU dealer, agent, or employee is authorized to make any modification, extension, or addition to this warranty.
In no event will CRU or its suppliers be liable for any costs of procurement of substitute products or services, lost profits, loss of information or
data, computer malfunction, or any other special, indirect, consequential, or incidental damages arising in any way out of the sale of, use of, or
inability to use any CRU product or service, even if CRU has been advised of the possibility of such damages. In no case shall CRU’s liability
exceed the actual money paid for the products at issue. CRU reserves the right to make modifications and additions to this product without
notice or taking on additional liability.
FCC Compliance Statement:“This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause
undesired operation.”
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a home or commercial envi-
ronment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction
manual, may cause harmful interference to radio communications.
In the event that you experience Radio Frequency Interference, you should take the following steps to resolve the problem:
1) Ensure that the case of your attached drive is grounded.
2) Use a data cable with RFI reducing ferrites on each end.
3) Use a power supply with an RFI reducing ferrite approximately 5 inches from the DC plug.
4) Reorient or relocate the receiving antenna.
