WIKA CPH7650 Bedienungsanleitung

Operating instructions

Betriebsanleitung

Portable pressure calibrator, model CPH7650

Tragbarer Druckkalibrator, Typ CPH7650

Portable pressure calibrator, model CPH7650

14261987.01 03/2018 EN/DE

WIKA operating instructions, model CPH7650

Operating instructions model CPH7650 Page 3 - 58

Betriebsanleitung Typ CPH7650 Seite 59 - 113

Further languages can be found at www.wika.com.

WIKA®is a registered trademark in various countries.

WIKA®ist eine geschützte Marke in verschiedenen Ländern.

Prior to starting any work, read the operating instructions!

Keep for later use!

Vor Beginn aller Arbeiten Betriebsanleitung lesen!

Zum späteren Gebrauch aufbewahren!

3WIKA operating instructions, model CPH7650

14261987.01 03/2018 EN/DE

Contents

1. General information 5

2. Safety 6

2.1 Intended use . . . . . . . . . . . . . . . . . . . . . . 7

2.2 Personnel qualification . . . . . . . . . . . . . . . . . . . 8

2.3 Special hazards . . . . . . . . . . . . . . . . . . . . . 8

2.4 Use of Lithium-Ion rechargeable batteries . . . . . . . . . . . . 10

2.5 Labelling, safety marks . . . . . . . . . . . . . . . . . . .12

3. Specifications 13

4. Design and function 15

4.1 Description . . . . . . . . . . . . . . . . . . . . . . . 15

4.2 Front . . . . . . . . . . . . . . . . . . . . . . . . . 16

4.3 Scope of delivery . . . . . . . . . . . . . . . . . . . . .17

4.4 Voltage supply . . . . . . . . . . . . . . . . . . . . . .17

4.5 User interface . . . . . . . . . . . . . . . . . . . . . . 18

4.5.1 Requirements for test assemblies with the CPH7650 . . . . . . . 19

4.5.2 Important instrument settings for calibration using calibration mode . . 19

4.5.3 Zero point setting and offset correction . . . . . . . . . . . . 20

4.5.4 Reference pressure sensor CPT6000 . . . . . . . . . . . . 20

5. Transport, packaging and storage 22

5.1 Transport. . . . . . . . . . . . . . . . . . . . . . . . 22

5.2 Packaging . . . . . . . . . . . . . . . . . . . . . . . 22

5.3 Storage . . . . . . . . . . . . . . . . . . . . . . . . 22

6. Commissioning, operation 23

6.1 Menu structure (operating modes) . . . . . . . . . . . . . . . 24

6.2 Explanation of the display . . . . . . . . . . . . . . . . . . 25

6.2.1 Instrument status messages shortly after switching on the CPH7650 . .25

6.2.2 Switching the pressure calibrator off . . . . . . . . . . . . .26

6.2.3 Display contents of the operating modes . . . . . . . . . . . 26

6.2.4 Content of the SETUP menu . . . . . . . . . . . . . . . 29

6.3 Operating modes . . . . . . . . . . . . . . . . . . . . .32

6.3.1 MEASURING mode . . . . . . . . . . . . . . . . . . 32

6.3.2 MEASURING mode (with test item) . . . . . . . . . . . . . 34

6.3.3 Mode CALIBRATION . . . . . . . . . . . . . . . . . . 36

6.3.4 CALIBRATION mode (preparing the test points of a calibration). . . . 38

6.3.5 CALIBRATION mode (calibration of a pressure transmitter) . . . . . 41

6.3.6 CALIBRATION mode (calibration of a pressure gauge) . . . . . . 42

6.3.7 SWITCH TEST mode . . . . . . . . . . . . . . . . . . 43

6.4 SETUP additional menu items . . . . . . . . . . . . . . . . 45

4WIKA operating instructions, model CPH7650

14261987.01 03/2018 EN/DE

Contents

Declarations of conformity can be found online at www.wika.com.

6.4.1 SETUP additional menu items: Functions . . . . . . . . . . . 45

6.4.2 SETUP additional menu items: CPH info . . . . . . . . . . . 46

6.4.3 SETUP additional menu items: Reference sensor . . . . . . . . 47

6.4.4 SETUP additional menu items: Reference sensor list . . . . . . . 48

6.4.5 SETUP additional menu items: CPH configuration . . . . . . . . 49

6.4.6 SETUP additional menu items: Interface . . . . . . . . . . . 50

6.4.7 SETUP additional menu items: CLEAR CalProg . . . . . . . . .50

6.5 Connection of the model CPT6000 reference pressure sensor . . . . . 51

6.6 Voltage supply . . . . . . . . . . . . . . . . . . . . . .51

6.7 Charging/discharging the Lithium-Ion rechargeable batteries . . . . . . 52

6.8 Pressure measurement . . . . . . . . . . . . . . . . . . .53

6.9 Measuring and sourcing current (4 ... 20 mA) . . . . . . . . . . . 53

7. Maintenance, cleaning and recalibration 54

7.1 Maintenance . . . . . . . . . . . . . . . . . . . . . . 54

7.2 Cleaning . . . . . . . . . . . . . . . . . . . . . . . .54

7.3 Recalibration . . . . . . . . . . . . . . . . . . . . . . 54

8. Faults 55

9. Dismounting, return and disposal 56

9.1 Dismounting . . . . . . . . . . . . . . . . . . . . . . 56

9.2 Return. . . . . . . . . . . . . . . . . . . . . . . . . 56

9.3 Disposal . . . . . . . . . . . . . . . . . . . . . . . .56

10. Accessories 57

5WIKA operating instructions, model CPH7650

14261987.01 03/2018 EN/DE

1. General information

■The portable pressure calibrator described in the operating instructions has been

manufactured using state-of-the-art technology. All components are subject to

stringent quality and environmental criteria during production. Our management

systems are certified to ISO 9001 and ISO 14001.

■These operating instructions contain important information on handling the instrument.

Working safely requires that all safety instructions and work instructions are observed.

■Observe the relevant local accident prevention regulations and general safety

regulations for the instrument's range of use.

■The operating instructions are part of the product and must be kept in the immediate

vicinity of the instrument and readily accessible to skilled personnel at any time.

■Skilled personnel must have carefully read and understood the operating instructions

prior to beginning any work.

■The manufacturer's liability is void in the case of any damage caused by using the

product contrary to its intended use, non-compliance with these operating instructions,

assignment of insufficiently qualified skilled personnel or unauthorised modifications to

the instrument.

■The general terms and conditions contained in the sales documentation shall apply.

■Subject to technical modifications.

■Factory calibrations / DKD/DAkkS calibrations are carried out in accordance with

international standards.

■Further information:

- Internet address: www.wika.de / www.wika.com

- Relevant data sheet: CT 17.02

- Application consultant: Tel.: +49 9372 132-9986

Fax: +49 9372 132-8767

info@wika.com

6WIKA operating instructions, model CPH7650

14261987.01 03/2018 EN/DE

1. General information / 2. Safety

Explanation of symbols

WARNING!

... indicates a potentially dangerous situation that can result in serious injury

or death, if not avoided.

CAUTION!

... indicates a potentially dangerous situation that can result in light injuries

or damage to property or the environment, if not avoided.

Information

... points out useful tips, recommendations and information for efficient and

trouble-free operation.

DANGER!

... identifies hazards caused by electrical power. Should the safety

instructions not be observed, there is a risk of serious or fatal injury.

2. Safety

WARNING!

Before installation, commissioning and operation, ensure that the

appropriate reference pressure sensor has been selected in terms of

measuring range, design and specific measuring conditions.

Non-observance can result in serious injury and/or damage to the

equipment.

Further important safety instructions can be found in the individual chapters

of these operating instructions.

7WIKA operating instructions, model CPH7650

14261987.01 03/2018 EN/DE

2. Safety

2.1 Intended use

This portable pressure calibrator serves as a calibration instrument for the widest variety

of pressure measuring instruments and has been designed for mobile use as well as for

stationary workshop and laboratory testing. Through the combination of the integrated

electrical pump and the electrical modules, in addition to the traditional measurement of

current and voltage signals it also enables you to supply transmitters or sensors with a

max. of 30 mA (voltage (idling) = DC 24 V).The pressure calibrator can be used to carry

out and document a complete calibration process.

WARNING!

■Only use model CPT6000 reference pressure sensors!

■Using other sensors could damage both the pressure calibrator and the

reference pressure sensor.

■To change the sensor, switch off the pressure calibrator and make sure

the system is vented. Before switching the instrument on, connect the

sensor, otherwise it may not be correctly identified by the instrument.

■When the CPH7650 is switched on, the CPT6000 reference pressure

sensor must not be under pressure, but rather should be at atmospheric

pressure. For overpressure or gauge pressure sensors, there is a

pressure compensation vent in the top of the sensor under the plastic

fitting.This vent (with integrated diaphragm) must always remain clear!

The instrument has been designed and built solely for the intended use described here,

and may only be used accordingly.

The technical specifications contained in these operating instructions must be observed.

Improper handling or operation of the instrument outside of its technical specifications

requires the instrument to be taken out of service immediately and inspected by an

authorised WIKA service engineer.

Handle electronic precision measuring instruments with the required care (protect from

humidity, impacts, strong magnetic fields, static electricity and extreme temperatures,

do not insert any objects into the instrument or its openings). Plugs and sockets must be

protected from contamination.

If the instrument is transported from a cold into a warm environment, the formation of

condensation may result in instrument malfunction. Before putting it back into operation,

wait for the instrument temperature and the room temperature to equalise.

The manufacturer shall not be liable for claims of any type based on operation contrary to

the intended use.

8WIKA operating instructions, model CPH7650

14261987.01 03/2018 EN/DE

2. Safety

2.2 Personnel qualification

WARNING!

Risk of injury should qualification be insufficient!

Improper handling can result in considerable injury and damage to

equipment.

The activities described in these operating instructions may only be carried

out by skilled personnel who have the qualifications described below.

Skilled personnel

Skilled personnel are understood to be personnel who, based on their technical training,

knowledge of measurement and control technology and on their experience and

knowledge of country-specific regulations, current standards and directives, are capable

of carrying out the work described and independently recognising potential hazards.

Special operating conditions require further appropriate knowledge, e.g. of aggressive

media.

2.3 Special hazards

WARNING!

■Do not apply a voltage greater than the specified voltage to the

instrument (see chapter 3 „Specifications“).

■Do not apply any external pressure to the CPH7650.

■Make sure that the test probes never contact a voltage source while the

test cables are connected to the current terminals.

■Do not use the calibrator if it is damaged. Before using the instrument,

check that there are no cracks on the case or any missing plastic parts.

Pay particular attention to the insulation of the connectors.

■Select the proper function and correct measuring range for the

measurement.

■Observe the operating parameters in accordance with chapter

3 “Specifications”.

■Always operate the pressure calibrator within the defined pressure range.

■To ensure problem-free operation, only operate the instrument on battery

power. Only use the power supply unit for charging the instrument's

batteries.

■Inspect the test cables for damaged insulation or exposed metal. Check

the continuity of the leads. Damaged test leads should be replaced before

using the instrument.

■When using test probes, keep fingers away from the test probe contacts.

Keep your fingers behind the test probes' finger guards.

■First connect the common lead, and then the live lead.When

disconnecting, remove the live test lead first.

9WIKA operating instructions, model CPH7650

14261987.01 03/2018 EN/DE

2. Safety

■Do not use the instrument if it is not working properly.The instrument

protection might be compromised. If in doubt, have the instrument

checked.

■Do not operate the instrument in areas with explosive gases, vapours or

dust.

■When measuring pressure, make sure that the pressure calibrator has

been switched to a depressurised state before the reference sensor or

the test item is connected or disconnected.

■Disconnect test leads before changing to another measurement or source

function.

■The switching valve (+/- pressure) should only ever be actuated when in a

depressurised state.

WARNING!

■To avoid false indications, which could lead to possible electric shock or

injuries, charge the rechargeable battery as soon as the battery indicator

appears.

■In order to avoid any possible damage to the instrument or the test

equipment, use the correct leads, the correct function and the correct

range for the measuring application.

DANGER!

Danger to life caused by electric current

Upon contact with live parts, there is a direct danger to life.

■Charging using a defective power supply unit (e.g. short circuit from the

mains voltage to the output voltage) can result in life-threatening voltages

at the instrument!

■Only use the power supply unit permitted by WIKA for the model

CPH7650 portable pressure calibrator.

■Only use a charger that is fully functional or undamaged.

The safety of the operator may be endangered if, for example

■there is visible damage to the instrument.

■the instrument is no longer working as specified.

■the instrument has been stored under unsuitable conditions for an extended period of

time.

If there is any doubt, please return the instrument to the manufacturer for repair or

maintenance.

10 WIKA operating instructions, model CPH7650

14261987.01 03/2018 EN/DE

2. Safety

2.4 Use of Lithium-Ion rechargeable batteries

WARNING!

Misusing Lithium-Ion batteries can lead to heating, explosion or ignition and

result in serious injury. Follow the safety instructions listed below:

■Do not solder directly to the Lithium-Ion batteries.

■Do not incinerate or heat the Lithium-Ion batteries.

■The Lithium-Ion batteries must only ever be connected with the correct

polarity.

■Never connect the positive terminal and the negative terminal of the

Lithium-Ion batteries to each other with any metallic object (such as wire).

■Never carry or store the Lithium-Ion batteries together with necklaces,

hairpins, or other metal objects.

WARNING!

■Lithium-Ion batteries should never be punctured with nails nor hit with a

hammer. In addition, Lithium-Ion batteries must never be trodden on or

exposed to other strong shocks or vibrations.

■Lithium-Ion batteries must never come into contact with water or salt

water. Moreover, they must never get wet.

WARNING!

Never take the Lithium-Ion battery apart nor alter it in any way. It contains

safety and protection devices which, if damaged, may cause it to generate

heat, explode or ignite.

WARNING!

Never place the Lithium-Ion batteries close to fires, ovens or other

high-temperature locations. Never leave the Lithium-Ion batteries in direct

sunshine or use or store them inside cars in hot weather. Doing so may

cause the Lithium-Ion batteries to generate heat, explode or ignite. Using the

Lithium-Ion batteries in this manner may also result in a loss of performance

and a shortened service life.

Never fit the Lithium-Ion batteries into equipment designed to be

hermetically sealed. In some cases hydrogen or oxygen may be discharged

from the Lithium-Ion batteries, which may result in rupture, fire or explosion.

Andere Handbücher für CPH7650

Inhaltsverzeichnis

Sprachen:

Andere WIKA Prüfgeräte Handbücher

WIKA

WIKA CPH7000 Bedienungsanleitung

WIKA

WIKA Wally Box III Bedienungsanleitung

WIKA

WIKA CEP6100 Bedienungsanleitung

WIKA

WIKA CPP 7 Bedienungsanleitung

WIKA

WIKA NETRIS 3 Bedienungsanleitung

WIKA

WIKA CTD9100 series Bedienungsanleitung

WIKA

WIKA CPB 5800 Bedienungsanleitung

WIKA

WIKA CPH7000 Bedienungsanleitung

WIKA

WIKA CEP6000 Bedienungsanleitung

WIKA

WIKA CEP1500 Bedienungsanleitung

WIKA

WIKA CPD8500 Bedienungsanleitung

WIKA

WIKA CPB3500 Bedienungsanleitung

WIKA

WIKA PG28 Bedienungsanleitung

WIKA

WIKA CPH6000 Bedienungsanleitung

WIKA

WIKA CPH7650 Bedienungsanleitung

WIKA

WIKA CTD9350 Bedienungsanleitung

WIKA

WIKA CPB3800 Bedienungsanleitung

WIKA

WIKA CPH8000-ET Bedienungsanleitung

WIKA

WIKA CEP6500 Bedienungsanleitung

WIKA

WIKA ACS-10 Bedienungsanleitung

WIKA

WIKA CEP1000 Bedienungsanleitung

WIKA

WIKA CPH65I0 Bedienungsanleitung

WIKA

WIKA CPP 3000-X Bedienungsanleitung

WIKA

WIKA Pascal ET Bedienungsanleitung

Beliebte Prüfgeräte Handbücher anderer Marken

SMART

SMART KANAAD SBT XTREME 3G Series Bedienungsanleitung

Agilent Technologies

Agilent Technologies BERT Serial Bedienungsanleitung

Agilent Technologies

Agilent Technologies N3280A Bedienungsanleitung

Vernier

Vernier Go Direct Voltage Bedienungsanleitung

Lifeloc

Lifeloc R.A.D.A.R. Bedienungsanleitung

Fluke

Fluke T5-600 Bedienungs- und Montageanleitung

Mercury

Mercury TSL01 Bedienungsanleitung

MAHA

MAHA MBT Series Bedienungsanleitung

Fuji Electric

Fuji Electric P-61 Bedienungsanleitung

ETC

ETC SealerAtor Bedienungsanleitung

Skyfine

Skyfine ETHYWAY V2 Bedienungsanleitung

Appion

Appion G5 Twin Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 8159-0112A Bedienungsanleitung

BW Technologies

BW Technologies MicroDock II Bedienungsanleitung

Sun Nuclear

Sun Nuclear 1027 Bedienungsanleitung

Biomark

Biomark HPR LITE READER Bedienungsanleitung

Hioki

Hioki 3169-20 Bedienungsanleitung

Ashcroft

Ashcroft ATE-100 Bedienungsanleitung