WIKA F2802 Bedienungsanleitung

Operating instructions

Betriebsanleitung

Tension/compression force transducer S-type

Models F2802, F2808

Zug-/Druckkraftaufnehmer S-Typ

Typen F2802, F2808

Example:

Models F2802, F2808

ADPR1X914114.01 07/2020 EN/DE

WIKA operating instructions, models

F2802, F2808

Operating instructions models F2802, F2808 Page 3 - 24

Betriebsanleitung Typen F2802, F2808 Seite 25 - 48

WIKA®and tecsis®are registered trademarks in various countries.

WIKA®and tecsis®sind geschützte Marken in verschiedenen Ländern.

Prior to starting any work, read the operating instructions!

Keep for later use!

Vor Beginn aller Arbeiten Betriebsanleitung lesen!

Zum späteren Gebrauch aufbewahren!

WIKA operating instructions, models F2802, F2808

ADPR1X914114.01 07/2020 EN/DE

Contents

1. General information 4

2. Design and function 5

2.1 Overview. . . . . . . . . . . . . . . . . . . . . . . . 5

2.2 Description . . . . . . . . . . . . . . . . . . . . . . .6

2.3 Scope of delivery . . . . . . . . . . . . . . . . . . . . .6

3. Safety 6

3.1 Explanation of symbols . . . . . . . . . . . . . . . . . . .6

3.2 Intended use . . . . . . . . . . . . . . . . . . . . . .7

3.3 Improper use . . . . . . . . . . . . . . . . . . . . . .8

3.4 Responsibility of the operator . . . . . . . . . . . . . . . . .8

3.5 Personnel qualification . . . . . . . . . . . . . . . . . . .9

3.6 Personal protective equipment . . . . . . . . . . . . . . . .9

3.7 Labelling, safety marks . . . . . . . . . . . . . . . . . . 10

4. Transport, packaging and storage 11

4.1 Transport. . . . . . . . . . . . . . . . . . . . . . . 11

4.2 Packaging and storage . . . . . . . . . . . . . . . . . . 11

5. Commissioning, operation 12

5.1 Precautions before commissioning . . . . . . . . . . . . . . 12

5.2 Mounting instructions . . . . . . . . . . . . . . . . . . 12

5.3 Installation of the F2802 and F2808 tension/compression force transducer 13

5.4 Installation of the F2802 tension/compression force transducer with swivel

heads . . . . . . . . . . . . . . . . . . . . . . . . 15

5.5 Electrical connection. . . . . . . . . . . . . . . . . . . 17

5.6 Connecting an amplifier. . . . . . . . . . . . . . . . . . 17

5.7 Pin assignment . . . . . . . . . . . . . . . . . . . . 17

6. Faults 18

7. Maintenance and cleaning 18

7.1 Maintenance . . . . . . . . . . . . . . . . . . . . . 18

7.2 Cleaning . . . . . . . . . . . . . . . . . . . . . . . 18

7.3 Recalibration . . . . . . . . . . . . . . . . . . . . . 19

8. Dismounting, return and disposal 19

8.1 Dismounting . . . . . . . . . . . . . . . . . . . . . 19

8.2 Return. . . . . . . . . . . . . . . . . . . . . . . . 19

8.3 Disposal . . . . . . . . . . . . . . . . . . . . . . . 19

9. Specifications 20

9.1 Approvals . . . . . . . . . . . . . . . . . . . . . . 23

Appendix: EU declaration of conformity 24

WIKA operating instructions, models F2802, F2808

ADPR1X914114.01 07/2020 EN/DE

1. General information

■

The tension/compression force transducers described in the operating instructions

have been designed and manufactured using state-of-the-art technology. All compo-

nents are subject to stringent quality and environmental criteria during production.

Our management systems are certified to ISO 9001.

■

These operating instructions contain important information on handling the instru-

ment. Working safely requires that all safety instructions and work instructions are

observed.

■

Observe the relevant local accident prevention regulations and general safety regula-

tions for the instrument's range of use.

■

The operating instructions are part of the product and must be kept in the immediate

vicinity of the instrument and readily accessible to skilled personnel at any time. Pass

the operating instructions on to the next operator or owner of the instrument.

■

Skilled personnel must have carefully read and understood the operating instructions

prior to beginning any work.

■

The general terms and conditions contained in the sales documentation shall apply.

■

Subject to technical modifications.

■

Factory calibrations / DKD/DAkkS calibrations are carried out in accordance with

international standards.

Further information:

- Internet address: www.wika.de

- Relevant data sheet: FO 51.48 (F2802)

FO 51.68 (F2808)

- Application consultant: Tel.: +49 9372 132-0

Fax: +49 9372 132-406

info@wika.de

Abbreviations, definitions

2-wire The two connection lines are used for the voltage supply.

The measuring signal also provides the supply current.

3-wire Two connection lines are used for the voltage supply.

One connection line is used for the measuring signal.

UB+ Positive power supply terminal

UB- Negative power supply terminal

S+ Positive output terminal

S- Negative output terminal

Shield Case

WIKA operating instructions, models F2802, F2808

ADPR1X914114.01 07/2020 EN/DE







2. Design and function

2.1 Overview

Force introduction

Measuring spring

Electrical connection

WIKA operating instructions, models F2802, F2808

ADPR1X914114.01 07/2020 EN/DE

2.2 Description

The tension/compression force transducer is designed for measuring static and

dynamic tension/compression forces.The tension/compression force transducer con-

sists of a measuring spring on which strain gauges (SGs) are applied.The measuring

body is made of corrosion-resistant stainless steel and is elastically deformed by a

tension/compression force introduced in the force direction.The resulting mechanical

tensions are measured by the strain gauges and output as an electrical output signal.

The strain gauges are arranged so that two of them are tensioned and the other two

are compressed when a force is applied to the transducer. The pick-up circuit includes

correction and compensation resistors to eliminate unwanted eects on the zero signal

and characteristic value.

2.3 Scope of delivery

■

Tension/compression force transducer

■

Operating instructions

3. Safety

3.1 Explanation of symbols

WARNING!

... indicates a potentially dangerous situation that can result in serious

injury or death, if not avoided.

CAUTION!

... indicates a potentially dangerous situation that can result in light injuries

or damage to property or the environment, if not avoided.

Information

... points out useful tips, recommendations and information for efficient

and trouble-free operation.

2. Design and function / 3. Safety

WIKA operating instructions, models F2802, F2808

ADPR1X914114.01 07/2020 EN/DE

3. Safety

3.2 Intended use

The tension/compression force transducers are designed for measuring static and

dynamic tension and/or compression forces.

Model Version

F2802 Measuring ranges 0 ... 0.5 kN to 0 ... 50 kN

F2808 Measuring ranges 0 ... 5 N to 0 ... 2,000 N

These instruments have been designed and tested in accordance with the relevant

safety regulations for electronic measuring instruments. Any usage outside of this is

deemed to be improper. The perfect functioning and operational safety of the trans-

ducers can only be guaranteed when complying with the instructions given in the

operating instructions. During its use, the legal and safety regulations (e.g. VDE 0100)

required for the particular application must additionally be observed. This also applies

accordingly when using accessories.Tension/compression force transducers are RoHS-

compliant in accordance with directive 2011/65/EU. Faultless and safe operation of this

transducer requires proper transport, professional storage, installation and mounting as

well as careful operation and corrective maintenance.

The instrument has been designed and built solely for the intended use described here,

and may only be used accordingly. The technical specifications contained in these

operating instructions must be observed. Improper handling or operation of the instru-

ment outside of its technical specifications requires the instrument to be taken out of

service immediately and inspected by an authorised service engineer.

Handle electronic precision measuring instruments with the required care (protect from

humidity, impacts, strong magnetic fields, static electricity and extreme temperatures,

do not insert any objects into the instrument or its openings). Plugs, wires and sockets

must be protected from contamination.

The manufacturer shall not be liable for claims of any type based on operation contrary

to the intended use.

WIKA operating instructions, models F2802, F2808

ADPR1X914114.01 07/2020 EN/DE

3. Safety

3.3 Improper use

WARNING!

Injuries through improper use

Improper use of the instrument can lead to hazardous situations and

injuries.

▶

Refrain from unauthorised modifications to the instrument.

Any use beyond or different to the intended use is considered as improper use.

3.4 Responsibility of the operator

The instrument is used in the industrial sector. The operator is therefore responsible for

legal obligations regarding safety at work.

The safety instructions within these operating instructions, as well as the

safety, accident

prevention and environmental protection regulations for the application area must be

maintained.

The operator is obliged to maintain the product label in a legible condition.

To ensure safe working on the instrument, the operating company must ensure

■

that suitable first-aid equipment is available and aid is provided whenever required.

■

that the skilled electrical personnel are regularly instructed in all topics regarding

work safety, first aid and environmental protection and know the operating instruc-

tions and in particular, the safety instructions contained therein.

■

that the instrument is suitable for the particular application in accordance with its

intended use.

■

that personal protective equipment is available.

WIKA operating instructions, models F2802, F2808

ADPR1X914114.01 07/2020 EN/DE

3. Safety

3.5 Personnel qualification

WARNING!

Risk of injury should qualification be insufficient

Improper handling can result in considerable injury and damage to equip-

ment.

▶

The activities described in these operating instructions may only be

carried out by skilled personnel who have the qualifications described

below.

Skilled electrical personnel

Skilled electrical personnel are understood to be personnel who, based on their techni-

cal training, know-how and experience as well as their knowledge of country-specific

regulations, current standards and directives, are capable of carrying out work on

electrical systems and independently recognising and avoiding potential hazards. The

skilled electrical personnel have been specifically trained for the work environment they

are working in and know the relevant standards and regulations. The skilled electrical

personnel must comply with current legal accident prevention regulations.

3.6 Personal protective equipment

The requirements for the required protective equipment result from the ambient

conditions at the place of use, other products or the connection to other products.

The requisite personal protective equipment must be provided by the operating

company. The operator is in no way relieved of his obligations under labour law for the

safety and the protection of workers' health.

The design of the personal protective equipment must take into account all operating

parameters of the place of use.

WIKA operating instructions, models F2802, F2808

ADPR1X914114.01 07/2020 EN/DE

















Type

Manufacturer logo

Serial number

Ingress protection per DIN EN 60529

Pin assignment

Manufacturer address

Force direction

Supply voltage

Output signal

Measuring range

Product code

3. Safety

3.7 Labelling, safety marks

Product label

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Beliebte Wandler Handbücher anderer Marken

HBM

HBM AD101B Bedienungsanleitung

Camille Bauer

Camille Bauer SINEAX F534 Bedienungsanleitung

Trane

Trane KIT 16724 Montageanleitung

Lumel

Lumel P18 Bedienungsanleitung

B&C Speakers

B&C Speakers DE75PTN Bedienungsanleitung

MAMAC SYSTEMS

MAMAC SYSTEMS PR-243 Handbuch

Mianyang Weibo Electronic

Mianyang Weibo Electronic WB Series Bedienungsanleitung

ProMinent

ProMinent Dulcometer DMT Bedienungsanleitung

MKS

MKS MicroPirani 925 Series Anleitung zur Verwendung

Alcatel Vacuum Technology

Alcatel Vacuum Technology BARATRON 622A Bedienungsanleitung

Camille Bauer

Camille Bauer SIRAX CH-5610 Bedienungsanleitung

Veris Industries

Veris Industries PW Series Bedienungsanleitung

HBM

HBM TJ1-S6 Bedienungsanleitung

Simrad

Simrad ES120-7C - REV D Benutzerhandbuch

HBM

HBM C18 Bedienungsanleitung

Airmar

Airmar M260 Bedienungsanleitung

Spirax Sarco

Spirax Sarco ITV1030 Bedienungsanleitung

halstrup-walcher

halstrup-walcher PU10 Bedienungsanleitung