Wilks USA H1230D Bedienungsanleitung
1
© Wilks-USA
Hedge Trimmer
1
Use the product according to the manual. Any loss or damage caused from improper use will be
borne by the user and the warrenty will be terminated. • Keep this manual for future reference. •
Products covered by this manual may vary in appearance, assembly, inclusions, specifications,
description and packaging.
V 1.0
Hedge Trimmer
2
© Wilks-USA
Hedge Trimmer
Contents
02 - Contents
03 - Safety
04 - Parts location
04 - Specification
05 - Warning labels on the machine
05 - Symbols on the machine
06 - For safe operation
06 - Working condition
07 - Working circumstance
07 - Working Plan
08 - Before starting the engine
09 - Using the product
09 - If Someone comes near when using
10 - Using the product
10 - Handling fuel
11 - Transportation
11 - Fuel
12 - How to mix fuel
12 - Fueling the unit
12 - For longer engine life avoid the following
13 - Operation
13 - Starting the engine
13 - Stopping the engine
14 - Cutting work
15 - Maintenance
16 - Sharpening
17 - Safety lock
17 - Anti-viberation system
17 - Air filter
17 - Fuel filter
17 - Air cooling system
18 - Spark plug
18 - Gear case
18 - Adjusting throttle cable
18 - Adjusting carburettor
19 - Storage
19 - Disposal
19 - Troubleshooting Guide
20 - CE Declaration of Conformity
3
© Wilks-USA
Hedge Trimmer
3
Safety
When you see this symbol, pay special attention to the section text. Personal risk or damage
may occur if these steps are not followed. You risk damage to your machine or specific parts if
due care and attention is not paid to these sections.
When you see this symbol, pay attention to the section text. Important features and advice is
given throughout this manual relating to specific parts and accessories. To ensure you get the
maximum use from your machine, regular maintenance is advised.
Take note of this symbol throughout this manual
Take note of this symbol throughout this manual
The following symbols are used throughout this manual. Please note these icons as they are
consequential to your personal safety during use.
4
© Wilks-USA
Hedge Trimmer
Parts Location
Specification
Model H1230D
Type Double-action type
Blade length (from the tip of the gear case) 600mm
Engine Model 1E34F
Engine displacement 22.5cc
Rated power output 0.8KW/1HP
Blade displacement 22.5 cm3
Carburetor Diaphragm type
Ignition system I.C.controlled flywheel magneto
Spark plug L8RTF
Fuel Mixture (Petrol 25 : Oil 1)
Fuel tank capacity 0.6L
Starter Recoil starter
Clutch Centrifugal type
Dry weight 5.8KG
5
© Wilks-USA
Hedge Trimmer
Warning labels on the machine
Symbols on the machine
If warning label peels off or becomes soiled and impossible to read, you should
contact the dealer from which you purchased the product to order new labels
and affix them in the required location(s).
Never modify your machine.
We won’t warrant the machine if you use the remodeled hedge trimmer or if you
don’t observe the proper usage written in the manual.
(1) Read owner’s manual before operating this machine.
(2) Wear head, eye and ear protection.
(3) Handling this machine improperly could result in accidents causing serious
injury or death. Read this manual carefully and practice using the hedge-
trimmer until you are fully acquainted with all operations and have learned
wto use it correctly.
(4) Blades are extremely sharp and can easily cause cuts.
For safe operation and maintenance, symbols are carved in relief on the machine. According to
these indications, please be careful not to make a mistake.
The opening to refuel the “PETROL MIX”
Position: FUEL TANK CAP
The position to close the choke
Position: AIR FILTER COVER
The position to open the choke
Position: AIR FILTER COVER
6
© Wilks-USA
Hedge Trimmer
1. THIS MACHINE CAN CAUSE SERIOUS INJURIES. Read this manual carefully
until you completely understand and follow all safety and operating instructions. Also,
know how to stop the machine quickly in an emergency.
2. Keep this manual handy so that you may refer to it later whenever any questions
arise. Also note, if you have any questions which cannot be answered herein, contact
the dealer from whom you purchased the product.
3. Always be sure to include this manual when selling, lending, or otherwise
transferring the ownership of this product.
4. Never allow children or anyone unable to fully understand the directions given in
the manual to use the machine.
1. When using the product, you should wear proper clothing
(1) Helmet
(2) Ear protectors
(3) Protection goggles or face protector
(4) Thick work gloves
(5) Non-slip-sole work boots
2. And you should carry with you
(1) Attached tools
(2) Properly reserved fuel
(3) Spare blade
(4) Things to notify your working area (rope, warning signs)
(5) Whistle (for collaboration or emergency)
(6) Hatchet or saw (for removal of obstacles)
(7) First-aid kit
3. Do not wear loose clothing, jewelry, short trousers, sandals, or go
barefoot. Do not wear anything which might be caught by a moving part of the
unit. Secure hair so it is above shoulder length.
For safe operation
Working condition
7
© Wilks-USA
Hedge Trimmer
1. Never start the engine inside a closed room or building. Exhaust gases contain
dangerous carbon monoxide.
2. Never use the product,
a. When the ground is slippery or when you can’t maintain a steady
posture.
b. At night, at times of heavy fog, or at any other times when your field of
vision might be limited and it would be difficult to gain a clear view of
the working area.
c. During rain, during storms at times of strong or gale-force winds, or
at any other times when weather conditions might make it unsafe to
use the product.
1. You should never use the product when under the influence of alcohol, when
suffering from exhaustion or lack of sleep, when suffering from drowsiness as a
result of having taken cold medicine or at any other time when a possibility exists
that your judgment might be impaired or that you might not be able to operate the
product properly and in a safe manner.
2. When planning your work schedule, allow plenty of time to rest. Limit the
amount of time over which the product is to be used continuously to somewhere
around 30 ~ 40 minutes per session, and take 10 ~ 20 minutes of rest between
work sessions. Also try to keep the total amount of work performed in a single day
under 2 hours or less.
1. If you don’t observe the working time, or working manner (See
“USING THE PRODUCT”), Repetitive Stress Injury (RSI) could occur.
If you feel discomfort, redness and swelling of your fingers or any
other part of your body, see a doctor before getting worse.
2. To avoid noise complaints, in general, operate product between 8
a.m. and 5 p.m. on weekdays and 9 a.m. to 5 p.m. on weekends.
For safe operation
Working circumstance
Working plan
8
© Wilks-USA
Hedge Trimmer
Check and follow the local regulations as to sound level and hours of operations for
the product.
1. The area within a perimeter of 15m of the person using the machine should
be considered a hazardous area in which no one should enter. If necessary,
warning signs should be placed around the perimeter of the area. When work is
to be performed simultaneously by two or more people, care should also be taken
to regularly look around and check for the presence and locations of other people
work- ing to help maintain a safe distance between each person.
2. Check the condition of working area to avoid any accident by hitting hidden obstacles
such as stumps, stones, cans, or broken glass. Remove any obstacle before beginning work.
3. Inspect the entire unit for loose fasteners and fuel leakage. Make sure that the
cutting attachment is properly installed and securely fastened.
1. Keep bystanders, especially children, and animals at least 15 m away from
the operating point. If you are approached, immediately stop the engine.
2. The product is equipped with a centrifugal clutch mechanism, so the
cutting attachment begins to move as soon as the engine is started by putting
the throttle into the start position. When starting the engine, place the
product onto the ground in a flat clear area and hold it firmly in place
so as to ensure that neither the cutting part nor the throttle come into
contact with any obstacle when the engine starts.
• Never place the throttle into the high-speed position when starting the
engine.
• Never start the engine at the cutting attachment side.
3. After starting the engine, check to make sure that the cutting attachment stops moving
when the throttle is moved fully back to its original position. If it continues to move even after
the throttle has been moved fully back, turn off the engine and contact your authorized Kiam
dealer.
For safe operation
Before starting the engine
Starting the engine
9
© Wilks-USA
Hedge Trimmer
Cut only materials recommended by the manufacturer. And use only for tasks explained in the
manual.
1. Grip the handles firmly with both hands using your whole hand. Place your
feet slightly apart (slightly further apart than the width of your shoulders) so that
your weight is distributed evenly across both legs, and always be sure to maintain
a steady, even posture while working.
2. Maintain the speed of the engine at the level required to perform cutting
work, and never raise the speed of the engine above the necessary level.
3. If the unit starts to shake or vibrate, turn off the engine and check the whole
unit. Do not use it until the trouble has been properly corrected.
4. Keep all parts of your body away from moving cutting attachment and hot
surfaces.
5. Never touch the exhaust, spark plug or other metallic parts of the engine
while the engine is in use or immediately after turning the engine off. Doing so
may cause burns or electrical shocks.
6. While operating the machine be always sure of a safe and secure operating
position especially when using steps or a ladder.
7. Check the cutting attachment. Never use blades that are dull, cracked or damaged.
8. To reduce the fire hazard, clean dirt, leaves and surplus lubricant, etc from the muffler and
engine.
1. Guard against hazardous situations at all times. Warn adults to keep pets and children
away from the area. Be careful if you are approached. Injury may result from flying debris.
2. If someone calls out or otherwise interrupts you while working, always be sure to turn off
the engine before turning around.
For safe operation
Using the product
If someone comes near when using
10
© Wilks-USA
Hedge Trimmer
1. In order to maintain your product in proper working order, perform the maintenance and
checking operations described in the manual at regular intervals.
2. Always be sure to turn off the en- gine and disconnect the spark plug wire before
performing any maintenance, checking procedures or working on the machine.
The metallic parts reach high temperatures immediately after stopping the engine.
3. In the event that any part must be replaced or any maintenance or repair work not
described in this manual must be performed, please contact your authorized Kiam dealer for
assistance.
4. Under no circumstances should you ever take apart the product or alter
it in any way. Doing so might result in the product becoming damaged during
operation or the product becoming unable to operate properly.
1. The engine of the product is designed to run on mixed fuel which contains
highly flammable petrol. Never store cans of fuel or refill the tank of the unit in
any place where there is a boiler, stove, wood fire, welding sparks, electrical
sparks or any other source of heat or fire which might ignite the fuel.
2. Never smoke while operating the unit or refilling its fuel tank.
3. When refilling the tank, always turn off the engine and allow it to
cool down. Take a careful look around to make sure that there are no
sparks or open flames anywhere nearby before refueling.
4. Wipe spilled fuel completely using a dry rag if any fuel spillage occurs during refueling.
5. After refueling, screw the fuel cap back tightly onto the fuel tank and then carry the unit to
a spot 3 m or more away from where it was refueled before turning on the engine.
6. Do not inhale fuel fumes as they are toxic.
For safe operation
Using the product
Handling fuel
Inhaltsverzeichnis
